Validity and Accuracy of Equivalent Circuit Models of Passive Inductive Meshes. Definition of a Novel Model for 2D Grids

Accuracy of equivalent circuit models of periodic grids is investigated in amplitude and phase in the visible region. The grids studied here are one-dimensional (1D) and two-dimensional (2D) inductive thin metal meshes. They are located in free space and are illuminated by a plane wave under normal incidence. The range of validity and the accuracy of conventional circuit models are defined by comparison with rigorous results obtained with the Finite-Difference Time-Domain (FDTD) method. In particular, it is shown that electrical models of 1D grids are accurate, whereas equivalent circuits of 2D grids should be used very cautiously. Then, a new formulation is proposed to overcome this major drawback. In the non-diffraction region, the agreement between our model and the FDTD results is within 2% for the power reflectivity and 1° for the phase over a very wide range of strip widths.     

Study on the radial composite piezoelectric ceramic transducer in radial vibration

A new type of radial composite piezoelectric transducer in radial vibration is developed and analyzed. The radial composite transducer consists of a piezoelectric ceramic thin ring polarized in the thickness direction and a metal thin circular ring. They are connected together and excited to vibrate in the radial direction. The radial vibrations of a piezoelectric ceramic thin ring and a metal thin circular ring are analyzed, respectively. Their radial electro-mechanical equivalent circuits are obtained. Based on the electro-mechanical equivalent circuits and using the boundary conditions between the piezoelectric ceramic thin ring and the metal thin circular ring in the radial direction, the electro-mechanical equivalent circuit of the radial composite piezoelectric transducer is derived out and the resonance frequency equation is obtained. The relationship between the resonance frequency and the geometrical dimensions of the transducer is analyzed. Some radial composite piezoelectric transducers are designed and manufactured. The resonance frequencies and the anti-resonance frequencies, the electro-mechanical equivalent circuit parameters are measured. The effective electro-mechanical coupling coefficient and the mechanical quality factor are calculated. It is illustrated that the measured radial resonance frequencies are in good agreement with the theoretical results from the resonance frequency equation.     

石英晶体多路微天平等效电路和相关实验研究

从AT切的石英晶体等效电路出发，利用电路理论推导单片石英晶体上耦合电极的相互影响，相互耦合作用用复电阻描述，然后通过实验观察复电阻的频率特性，分析其具体的形式，同时通过实验初步观察了MQCM(multi-channel quartz crystal microbalance)对石英片谐振频率的影响，以及不同电极尺寸对耦合的影响。     

波长校准用低压石英汞灯驱动电源的研制

研制波长校准用低压石英汞灯电源,用于驱动汞灯起辉并维持稳态发光。电路由EMI滤波电路、桥式整流电路、LCC半桥谐振逆变电路、控制电路和保护电路5部分组成。采用系统建模与仿真验证电路的可行性并计算电路参数理论值,利用示波器和功率表验证电源输出参数,功率输出稳定性不大于0.03 W。根据紫外可见近红外分光光度计国防最高计量标准对研制的电源驱动汞灯的工作效果进行评价。结果表明,汞灯能够输出系列特征谱线,谱线相对强度稳定性不大于5.16%;汞灯工作3 h后,灯管外壳表面温度为43℃。该驱动电源的性能参数满足JJG112–2015《低压石英汞灯波长标准器检定规程》的要求。     

An Open‐Circuit Voltage and Power Conversion Efficiency Study of Fullerene Ternary Organic Solar Cells Based on Oligomer/Oligomer and Oligomer/Polymer

Variations in the open‐circuit voltage (V _oc) of ternary organic solar cells are systematically investigated. The initial study of these devices consists of two electron‐donating oligomers, S2 (two units) and S7 (seven units), and the electron‐accepting [6,6]‐phenyl C71 butyric acid methyl ester (PC₇₁BM) and reveals that the V _oc is continuously tunable due to the changing energy of the charge transfer state (E _ct) of the active layers. Further investigation suggests that V _oc is also continuously tunable upon change in E _ct in a ternary blend system that consists of S2 and its corresponding polymer (P11):PC₇₁BM. It is interesting to note that higher power conversion efficiencies can be obtained for both S2:S7:PC₇₁BM and S2:P11:PC₇₁BM ternary systems compared with their binary systems, which can be ascribed to an improved V _oc due to the higher E _ct and an improved fill factor due to the improved film morphology upon the incorporation of S2. These findings provide a new guideline for the future design of conjugated polymers for achieving higher performance of ternary organic solar cells.

     

Banach空间中一类二阶具阻尼项的积分-微分包含的可控性

本文讨论了一类二阶具阻尼项的积分-微分包含问题.利用集值不动点定理将问题转化为求不动点问题,进而得到系统可控性的充分条件.     

静电力平衡式微型硅加速度计方案分析

静电力平衡式微型硅加速度计是一种新型加速度计。本文对这种加速度计的３种典型方案进行了分析，导出静电力（力矩）、静电力平衡回路刚度（角刚度）及加速度测量范围的表达式。有关结果可为这种加速度计参数设计提供理论依据。     

自抗扰控制思想在动力调谐陀螺仪力平衡回路中的应用

提出了动力调谐陀螺力平衡回路的自抗扰控制方法(ADRC)。在计算机仿真的基础上搭建陀螺仪力平衡回路硬件电路，利用转台对动力调谐陀螺施加不同扰动，观察在大角度或大角速率等动态条件下ADRC控制技术对陀螺仪的控制效果。     

超材料谐振子间的电耦合谐振理论与实验研究

通过将两个金属开口环谐振器口对口地放置, 实现了超材料谐振子间的电耦合谐振. 对电耦合谐振的微波等效电路进行了理论分析和数值计算, 结果表明耦合后的超材料谐振子能产生两个谐振频率, 其中一个随耦合强度的增加逐渐向低频方向移动, 而另一个固定在单谐振子的谐振频率处不变. 微波透射谱的实验测试和电磁仿真结果表明, 两个谐振峰随耦合强度的增加分别向低频和高频方向移动. 分析表明: 低频谐振峰的位置主要是由超材料谐振子间的电耦合强度决定的; 高频谐振偏离单谐振子的谐振频率主要是由不可避免的磁耦合引起的, 而且在耦合间距越小时磁耦合影响越大. 提出的基于超材料谐振子间的电磁耦合实现的双频谐振及其可调性极大地增加了超材料的设计与应用空间.     

超高效液相色谱-串联质谱法测定印刷电路板中全氟辛烷磺酸盐

经剪碎和粉碎的印刷电路板样品用甲酸-甲醇(0.1+99.9)溶液超声提取,所得提取液于45℃旋转蒸发至1mL,加水5mL,用稀甲酸或稀氨水调节溶液的pH值为4～5。将溶液通过Oasis WAX固相萃取小柱净化,用甲酸(2+98)溶液和甲醇先后清洗小柱后,用氨水-甲醇(2+98)混合溶液洗脱,将全部洗脱液氮吹蒸发至近干,用流动相溶液定容为1mL供测定。所用色谱柱为Acquity UPLC BEH C18柱,柱温30℃,进样量为5μL。由5mmol.L-1乙酸铵溶液及乙腈(60+40)混合溶液作为流动相,在0.3mL.min-1流量条件下进行洗脱。质谱测定中采用ESI负电离方式,多反应监测扫描模式。测得全氟辛烷磺酸盐质量分数在1.0～1 000μg.kg-1范围内与峰面积值呈线性关系,测定下限(10S/N)为1.0μg.kg-1。用标准加入法测得回收率在89.0%～99.3%之间。