海生物附著对钢板管椿腐蚀之影响

为了解海生物对钢板管椿腐蚀之影响 ,将SS4 1金属试片浸渍于高雄港 #1 4码头水深 3m处及实验室人造海水中 .试验期间 ,以DC直流动电位极化曲线扫描与AC交流电阻抗分析现场量测各试片的瞬间腐蚀速率 .结果发现 :宏观地看 ,海生物在金属 (或锈层 )表面的附著可以减缓金属腐蚀 ,但从微观 (micro)的观点推论 ,海生物在金属表面的附著亦可以造成氧差或浓度差异电池 ,促成局部腐蚀 .此外 ,等效电路的模拟 ,有助于了解海生物附著对金属腐蚀的影响 ,即随浸渍时间的延长 ,金属表面因锈层增厚且趋于致密 ,以致锈层电阻增加 ;又因海生物种类不同 ,含水量不同 ,海生物电阻可能会有极大的差异     

Integrated circuit thermal analysis: A new thermal technique for polymer characterization

Polymer characterization has largely helped in the development of thermal analyzers and calorimeters, based mainly on the thermocouple technology, or more recently the semiconductor technology. With the use of an integrated silicon thermopile as a detector, a new thermal technique is appearing, to give more possibilities of investigations in the field of polymeric materials. Combining high sensitivity and use of small amount of sample, the originality of the new design comes from its low power consumption, giving rise to a portable version of the instrument. With such a concept, the thermal analysis technique is carried on the industrial site, to perform online measurements.Melting and crystallization, glass transition, control of reticulation are a promising field of applications for the characterization of polymeric materials on industrial sites.This revised version was published online in November 2005 with corrections to the Cover Date.     

Solid Contact Ion-selective Electrodes on Printed Circuit Board with Membrane Displacement

Multiplexed solid-contact ion-selective electrodes (SCISEs) are fabricated using printed circuit board (PCB) and mesoporous carbon black (MCB) as ion-to-electron transducer (solid contact). Four sensor configurations were examined and showed that in addition to MCB, the sensor configuration plays crucial role in the stability of the potential response. The enhanced sensor stability was also linked with suppression of transmembrane flux of water. The sensors exhibited near-Nernstian sensitivity (58.1 mV/dec for K⁺ ISEs and −55.1 mV/dec for NO₃^- ISEs), low detection limits (1.5–2.2 μM), and good short-term stability (∼0.1 mV/min). Sensors can be stored dry and used without preconditioning. This work demonstrates a promising approach to combining PCB technology and carbon black for large-scale production of low cost ISEs for point-of-care testing, wearables, or in situ field measurements.     

Formaldehyde interaction with adsorbed oxygen on open-circuit platinum electrodes in aqueous sulfuric acid solutions

The open circuit potential transients and cathodic potentiodynamic pulses were measured upon formaldehyde (methylene glycol) interaction with pre-adsorbed oxygen (O_ads) on Pt/Pt and pc Pt electrodes in aqueous sulfuric acid solutions. The slowest interaction of CH₂(OH)₂ with O_ads was observed in the high coverage range of the electrode surface (θ_O ～ 0.2 0.8 to 1). The process rate in this range is determined by the direct reaction of O_ads with CH₂(OH)₂ molecules from the bulk solution. In the middle surface oxygen coverage range (θ_O 0.2 to 0.8), CH₂(OH)₂ interaction with O_ads takes place by the mechanism of “conjugated reactions”. The kinetic parameters of reactions for CH₂(OH)₂, HCOOH, and CH₃ OH were compared. The rate of CH₂(OH)₂-O_ads interaction on Pt electrodes in the high oxygen coverage range was found higher by an order of magnitude than that of HCOOH and by two orders of magnitude than in the case of CH₃OH.     

微型气相色谱仪热导检测器放大电路设计

Agilent公司生产的Agilent 3000+系列色谱仪是微型气相色谱仪(micro GC)的典型代表,其热导检测器的信号放大电路和模数转换器(analog-to-digital convertor, ADC)存在功耗大、工作温度过高等不足.文中分析了micro GC电路的功能需求,从选用低噪声的24 bit Δ-Σ ADC ADS1255入手,设计了高共模电压容限、低噪声的全差分放大电路及其他外围电路,并且对全差分放大电路建立了噪声模型,计算了其噪声理论值,优化了系统设计参数.另外,还设计了一个测试平台,对所设计的全差分放大电路和ADC的性能进行了全面的测试评估,结果表明新设计的热导检测器放大电路与ADC的总噪声(以美国材料与试验协会(ASTM)标准值计)仅为1.25 μV,总功耗降低了3.7 W,满足micro GC的功能需求,而且可靠性高、体积小、结构简单,可用于新一代micro GC的研发和生产.     

Treatment of TiO2 with COOH‐Functionalized Germanium Nanoparticles to Enhance the Photocurrent of Dye‐Sensitized Solar Cells

A dye‐sensitized solar cell (DSSC) containing a TiO₂ film treated with COOH‐functionalized germanium nanoparticles (Ge COOH Nps) exhibited a higher short‐circuit photocurrent density (J_sc; 15.4 mA cm⁻²) compared to the corresponding untreated DSSC (13.4 mA cm⁻²) using N719 and a 12 μm thick TiO₂ film at 100 mW cm⁻². The amount of N719 attached to the treated TiO₂ film was 21 % greater than that attached to the untreated TiO₂ film. Enhancement of the J_sc value by 15 % was attributed mostly to an intramolecular charge transfer from N719 attached to the Ge COOH Nps to the TiO₂ conduction band through the Ge COOH Nps.     

印刷有机数字电路及应用

印刷有机电子技术是基于印刷原理的有机电子器件制造技术,是指将有机电子材料配制成功能性油墨,用印刷方式来制造电子器件与系统的方法,其发展涉及到材料化学、微电子学等多个学科方面的知识。其独特的制造方式和器件形态具有柔性、低成本、大面积制造等优势,并且与传统硅基电子器件在应用场合上形成了互补,在生物传感、电子皮肤、柔性显示等领域展示出优势。为了及时跟进这一快速发展的领域,对领域的发展有宏观的把握,本文从印刷技术和电路系统的角度进行了全面概述,介绍了喷墨打印、丝网印刷和转印印刷等印刷技术和基于印刷技术制备的有机数字电路(反相器、与非门、环形振荡器、D触发器),以及实现功能化的印刷电子应用(RFID、电子皮肤、OLED显示驱动背板等);最后,对本领域目前存在的问题和未来发展方向做了简要探讨。     

波长校准用低压石英汞灯驱动电源的研制

研制波长校准用低压石英汞灯电源,用于驱动汞灯起辉并维持稳态发光。电路由EMI滤波电路、桥式整流电路、LCC半桥谐振逆变电路、控制电路和保护电路5部分组成。采用系统建模与仿真验证电路的可行性并计算电路参数理论值,利用示波器和功率表验证电源输出参数,功率输出稳定性不大于0.03 W。根据紫外可见近红外分光光度计国防最高计量标准对研制的电源驱动汞灯的工作效果进行评价。结果表明,汞灯能够输出系列特征谱线,谱线相对强度稳定性不大于5.16%;汞灯工作3 h后,灯管外壳表面温度为43℃。该驱动电源的性能参数满足JJG112–2015《低压石英汞灯波长标准器检定规程》的要求。     

硅电极/溶液界面开路电位-时间谱和原子力显微镜在化学镀Ag中的应用研究

用开路电位-时间谱技术,表征了在硅（100）表面化学镀银的硅电极/溶液界 面吸附态。所得结果与原子力显微镜在纳米尺寸上的面结构信息分析结果作了对比 。同时也将该结果与循环伏安法（CV）结果作了比较。证明当硅电极表面具有单层 吸附Ag~+离子、表面单层吸附Ag~+离子发生沉积反应、Ag~+离子发生本体沉积时的 开路电位-时间曲线有完全不同的特征。     

On a Multivalued Version of the Sharkovskii Theorem and its Application to Differential Inclusions

Motivated by the applications to differential equations without uniqueness conditions, we separately prove multivalued versions of the celebrated Sharkovskii and Li–Yorke theorems. These are then applied, via multivalued Poincaré operators, to Carathéodory differential inclusions. Thus, besides another, infinitely many subharmonics of all integer orders can be obtained. Unlike in the single-valued case, for example, period three brings serious obstructions. Three counter-examples, related to these complications, are therefore presented as well. In a multivalued setting, new phenomena are so exhibited.