多胺对几种海洋微藻扩繁的影响

为探究多胺对海洋微藻扩繁的影响, 在外加外源多胺条件下对假微型海链藻、角毛藻、东海原甲藻、扁藻和微绿球藻进行室内培养. 结果表明: 在适宜温度条件下(23℃), 外源多胺对不同微藻生长差别很大, 其中对硅藻扩繁促进效应比较稳定; 而对其他门类的微藻, 外源多胺的促进效果比较差, 甚至具备一定的抑制效应. 而在不同温度条件下, 5种胺对角毛藻的生长有差异, 其中23℃条件下, 与对照相比, 多胺对角毛藻生长是促进作用; 而在15℃和30℃条件下, 多胺对角毛藻生长起抑制作用.     

Accumulation of Arsenic by Rhaphydophyceae Chattonella antiqua (Hada) Ono

Rhaphydophyceae Chattonella antiqua (Hada) Ono was grown in seawater containing an arsenic concentration up to 50 mg dm⁻³, and survived even at 200 mg dm⁻³. The arsenic content increased with an increase of the surrounding arsenic, iron and manganese concentrations. However, arsenic accumulation was unaffected by phosphorus concentration. Also, arsenic content in C. antiqua decreased at a selenium concentration of up 20 mg dm⁻³, and was reduced by the addition of antimony. In the living cells, about 52% of the arsenic which accumulated in each cell was found in the intracellular fraction, 27% in the lipid fraction, and 21% in the cell wall fraction.     

Methods to enhance tolerances of Chlorella KR-1 to toxic compounds in flue gas

Possible methods to minimize the toxic effects of SO _x and NO _x on the growth of a highly CO₂ tolerant and fast-growing microalga, Chlorella sp. KR-1, were investigated. Maintaining the pH of the culturing media at an adequate value was quite important to enhancing the tolerances of the microalgae to SO _x and NO _x . Controlling the pH by adding an alkaline solution, using a low flow rate of gas fed to the culture, and using a high concentration of inoculating cells were effective methods to maintaining the proper pH of the culture. Controlling the pH was the most effective method but could be applied only for some specific microalgae.     

Microfluidic Microalgae System: A Review

Microalgae that have recently captivated interest worldwide are a great source of renewable, sustainable and economical biofuels. The extensive potential application in the renewable energy, biopharmaceutical and nutraceutical industries have made them necessary resources for green energy. Microalgae can substitute liquid fossil fuels based on cost, renewability and environmental concern. Microfluidic-based systems outperform their competitors by executing many functions, such as sorting and analysing small volumes of samples (nanolitre to picolitre) with better sensitivities. In this review, we consider the developing uses of microfluidic technology on microalgal processes such as cell sorting, cultivation, harvesting and applications in biofuels and biosensing.     

Intensified recovery of lipids,proteins, and carbohydrates from wastewater-grown microalgae Desmodesmus sp. by using ultrasound or ozone

This study evaluates the effect of ultrasound and ozone pretreatments for the subsequent recovery of Desmodesmus sp. biocomponents—lipids, proteins, and carbohydrates—using a response surface methodology. Both pretreatments impact on the recovered lipids quality, solvent waste production and extraction time is analysed for process intensification purposes. For ultrasound pretreatment, independent parameters were energy applied (50–200 kWh/kg dry biomass), biomass concentration (25–75 g/L), and ultrasonic intensity (0.32 and 0.53 W/mL). While for ozone pretreatment, independent parameters were ozone concentration (3–9 mg O₃/L), biomass concentration (25–75 g/L), and contact time (5–15 min). In the case of ultrasound pretreatment, recovery yield reached 97 ± 0.4%, 89 ± 3%, and 73 ± 0.6% for proteins, carbohydrates and lipids respectively. Given process required: energy applied of 50 kWh/kg dry biomass, 75 g/L of biomass concentration, 0.32 W/mL of ultrasonic intensity, and 56 min of time process. Ultrasound caused high cell disruption releasing all proteins, thereby obviating downstream processing for its recovery. Ozone pretreatment recovery yield was 85 ± 2%, 48 ± 1.4%, and 25 ± 1.3%, for carbohydrates, lipids and proteins respectively, under the following conditions: 9 mg O₃/L of ozone concentration, 25 g/L of biomass concentration, and 5 min of contact time that depicts an energy consumption of 30.64 kWh/kg dry biomass. It was found that ultrasound and ozone pretreatments intensified the lysis and biocomponents recovery process by reducing solvent consumption by at least 92% and extraction time between 80% and 90% compared with extraction of untreated biomass biocomponents. Both pretreatments improve the composition of the recovered lipids. It was noted that the yield of neutral lipids increased from 28% to 67% for ultrasound pretreatment while for ozone pretreatment from 49% to 63%. The method used for lipid extraction may also have an effect but here it was kept constant.     

Potentially Antihyperglycemic from Biomass and Phycocyanin of Spirulina Fusiformis Voronikhin by in Vivo Test

Spirulina is one of the microalgae containing nutrients used as functional food and in theraupetic (active compound). Bioactive compound in Spirulina has antihyperglycemic activity or antidiabetes activity. Diabetes mellitus is a major health problem in the world. The research about the potential of microalgae as antihyperglicemic is important to do. The cultivation of microalgae was conducted in laboratory using flask and aquarium completed with non-stop aeration. Measurement of the antihyperglycemic activity in-vivo using mices that were fed with biomass containing Spirulina fusiformis Voronikhin and phycocyanin. Blood glucose levels were measured by methods of oral glucose tolerance test after a fasting period of 18 h. Oral administration of biomass and phycocyanin of Spirulina fusiformis V. at 0.15 mg · g^–1 and 0.30 mg · g^–1 proved to decrease the blood glucose level.     

微藻生物固碳技术进展和发展趋势

大气中CO2含量升高是导致温室效应的主要原因,因此,减少CO2的排放和积累是解决全球气候变暖的重点.传统的CO2减排方法包括捕集(capture)和储存(storage),涉及化学吸附、物理吸收、膜分离和低温蒸馏等一系列物理化学方法,但其均存在成本高和不可再生等缺点.通过种植或养殖生物质可以捕集CO2.微藻生长周期短、光合效率高,其CO2固定效率为一般陆生植物的10~50倍;同时微藻生长速度快,能利用不可耕地,具有广阔的发展前景.本文概述了适用的藻种及所能达到的CO2固定效果,分析了光生物反应器类型、光照强度、光周期、温度、pH、CO2浓度、CO2吸收效率、气体传质效率和营养需求(包括来自市政和工业农废水中的N、P等营养)等多种因素对微藻固碳效果的影响.最后,对微藻固碳的实际应用和经济可行性进行了评估,展望了微藻固碳技术的发展和应用前景.     

Carotenoid Production from Microalgae: The Portuguese Scenario

Microalgae have an outstanding capacity to efficiently produce value-added compounds. They have been inspiring researchers worldwide to develop a blue biorefinery, supporting the development of the bioeconomy, tackling the environmental crisis, and mitigating the depletion of natural resources. In this review, the characteristics of the carotenoids produced by microalgae are presented and the downstream processes developed to recover and purify them are analyzed, considering their main applications. The ongoing activities and initiatives taking place in Portugal regarding not only research, but also industrialization under the blue biorefinery concept are also discussed. The situation reported here shows that new techniques must be developed to make microalgae production more competitive. Downstream pigment purification technologies must be developed as they may have a considerable impact on the economic viability of the process. Government incentives are needed to encourage a constructive interaction between academics and businesses in order to develop a biorefinery that focuses on high-grade chemicals.     

Isolation of Industrial Important Bioactive Compounds from Microalgae

Microalgae are known as a rich source of bioactive compounds which exhibit different biological activities. Increased demand for sustainable biomass for production of important bioactive components with various potential especially therapeutic applications has resulted in noticeable interest in algae. Utilisation of microalgae in multiple scopes has been growing in various industries ranging from harnessing renewable energy to exploitation of high-value products. The focuses of this review are on production and the use of value-added components obtained from microalgae with current and potential application in the pharmaceutical, nutraceutical, cosmeceutical, energy and agri-food industries, as well as for bioremediation. Moreover, this work discusses the advantage, potential new beneficial strains, applications, limitations, research gaps and future prospect of microalgae in industry.     

Ce-Loaded HZSM-5 Composite for Catalytic Deoxygenation of Algal Hydrolyzed Oil into Hydrocarbons and Oxygenated Compounds

Despite the extensive research into the catalytic uses of zeolite-based catalysts, these catalysts have a limited useful lifetime because of the deactivating effect of coke production. This study looks at the use of Cerium (Ce) loaded HZSM-5 zeolite catalysts in the hydrocarbon and oxygenated chemical conversion from Chlorella Vulgaris microalgae crude oil. Characterization of structure, morphology, and crystallinity was performed after the catalysts were manufactured using the impregnation technique. Soxhlet extraction was carried out to extract the crude oil of microalgae. Transesterification reaction was used to produce algal hydrolyzed oil (HO), and the resulting HO was put to use in a batch reactor at 300 °C, 1000 rpm, 7 bars of nitrogen pressure, a catalyst to the algal HO ratio of 15% (wt. %), and a retention time of 6 h. To determine which Ce-loaded HZSM-5 catalysts would be most effective in converting algal HO into non-oxygenated molecules (hydrocarbons), we conducted a series of tests. Liquid product characteristics were analyzed for elemental composition, higher heating value (HHV), atomic ratios of O/C and H/C, and degree of deoxygenation (DOD%). Results were categorized into three groups: product yield, chemical composition, and carbon number distribution. When Cerium was added to HZSM-5 zeolite at varying loading percentages, the zeolite’s acid sites became more effective in facilitating the algal HO conversion. The results showed that 10%Ce/HZSM-5 had the greatest conversion of the algal HO, the yield of hydrocarbons, HHV, and DOD% (98.2%, 30%, 34.05 MJ/Kg, and 51.44%, respectively) among all the synthesized catalysts in this research. In conclusion, the physical changes seen in the textural characteristics may be attributed to Cerium-loading on the parent HZSM-5; nevertheless, there is no direct association between the physical features and the hydrocarbons yield (%). The primary impact of Cerium alteration of the parent HZSM-5 zeolite was to change the acidic sites required to boost the conversion (%) of the algal HO in the catalytic deoxygenation process, which in turn increased the hydrocarbons yield (%), which in turn increased the HHV and DOD%.