通过表面机械加工调控Zr52.5Cu17.9Ni14.6Al10Ti5非晶合金的结构和韧性

作为一种新型结构材料, 非晶态合金的韧性需要进一步提高. 提高非晶态合金韧性的方法有引入枝晶相、调整其成分改变其泊松比影响其剪切带衍生、裂纹扩展等.本文通过表面机械加工的方法来调控非晶态合金的微观结构及韧性. 我们采用真空电弧熔炼、亚稳态薄板离心浇铸系统制备了Zr_52.5Cu_17.9Ni_14.6Al₁₀Ti₅ (原子百分比) (Vit105)非晶合金板,并用表面机械研磨处理方法(surface mechanical attrition treatment, SMAT), 在Vit105板上形成纳米尺度局域类晶体序结构. 基于差示扫描量热分析、纳米压痕实验, 我们发现SMAT处理后的Vit105合金板表面附近弛豫焓更低, 微观结构更加均匀、稳定. 通过显微维氏硬度计测试, 发现SMAT处理后样品的表面附近硬度增大,硬度值分布也更均匀. 通过三点弯断裂实验, 可得到SMAT处理后合金板缺口韧度值从70.7 ± 4.7 MPa·m1/2提高到112.8 ± 3.7 MPa·m1/2. SMAT处理后合金板断裂后, 缺口前端剪切带密度比未处理的更大. Vit105合金板韧性的提高源于SMAT处理对剪切带萌生的促进作用. 该研究表明,表面机械加工可以在非晶态合金中形成局域类晶体有序结构, 影响其结构均匀性, 增大其硬度, 促进剪切带萌生, 提高其韧性. 表面机械加工作为一种新型的改变材料性能的手段, 具有广阔的应用前景.      

PREPARATION OF POLYMER MICROSPHERES WITH PYRIDYL GROUP AND THEIR STABILIZED GOLD METALLIC COLLOIDS

Narrow disperse poly(ethyleneglycol dimethacrylate-co-4-vinylpyridine)(poly(EGDMA-co-4-VPy))microspheres were prepared by distillation-precipitation copolymerization of ethyleneglycol dimethacrylate(EGDMA)and 4-vinylpyridine (4-VPy)with 2,2'-azobisisobutyronitrile(AIBN)as initiator in neat acetonitrile.The polymer microspheres containing pyridyl group were then utilized as stabilizer for gold metallic colloids with the diameter around 7 nm,which were prepared by the in situ reduction of gold chloride trihydrate with sodium borohydride through the coordination of the pyridyl group on the gel layer and surface of the microsphere with the gold metallic nano-particles.The catalytic properties of the pyridyl- functionalized microsphere-stabilized gold metallic colloids and the behavior of the stabilized-catalyst for the recycling were investigated with reduction of 4-nitrophenol to 4-aminophenol as a model reaction.     

Characterization and catalytic behavior of La2 - x (Sr, Th)xCuO4 ± λ in reaction NO+CO

Two mixed oxide systems La₂-_xSr_xCuO_{4± λ} (0.0⩽x⩽1. 0) and La_2-xTh_xCuO_{4± λ} (O. O⩽x⩽ 0.4) with K₂NiF₄ structure were prepared by varyingx values. Their crystal structures were studied by means of XRD and IR spectra. The average valence of Cu ion at B site, nonstoichiometric oxygen (λ) and the chemical composition in the bulk and on the surface of the catalysts were measured by means of chemical analysis and XPS. The catalytic behavior in reaction CO+NO was investigated under the regular change of average valence of Cu ion at B site and nonstoichiometric oxygen (λ). Meanwhile, the adsorption and activation of the small molecules NO and the mixture of NO+CO over the mixed oxide catalysts were studied by means of MS-TPD. The catalytic mechanism of reaction NO+CO over these oxide catalysts were proposed; and it has been found that, at lower temperatures the activation of NO is the rate determining step and the catalytic activity is related to the lower valent metallic ion and its concentration, while at higher temperatures the adsorption of NO is the rate determining step and the catalytic activity is related to the oxygen vacancy and its concentration. Project supported by the National Natural Science Foundation of China.     

氮掺杂纳米管包覆金属钴催化苯甲醇和苯胺一步N-烷基化反应

通过直接热解三聚氰胺、硝酸钴和葡萄糖混合物制备氮掺杂碳纳米管包覆金属钴催化剂(Co@NCNT).Co@NCNT具有较大的比表面积、均匀的氮分布以及包覆结构.在苯甲醇和苯胺一步法N-烷基化反应中Co@N CNT具有较高的催化活性,且循环4次反应活性没有明显的变化.控制实验和中毒实验表明金属Co和N对催化活性起着重要的作用,同时金属Co是中间产物N-苄叉苯胺加氢的主要活性位.     

Microstructure of metallic copper nanoparticles/metallic disc interface in metal–metal bonding using them

This paper describes a metal–metal bonding technique using metallic Cu nanoparticles prepared in aqueous solution. A colloid solution of metallic Cu particles with a size of 54 ± 15 nm was prepared by reducing Cu²⁺ (0.01 M (CH₃COO)₂Cu) with hydrazine (0.6 M) in the presence of stabilizers (5 × 10^?4 M citric acid and 5 × 10^?3 M cetyltrimethylammonium bromide) in water at room temperature in air. Discs made of metallic materials (Cu, Ni/Cu, or Ag/Ni/Cu) were successfully bonded under annealing at 400 °C and pressurizing at 1.2 MPa for 5 min in H₂ gas with help of the metallic Cu particle powder. Shear strength required for separating the bonded discs was 27.9 ± 3.9 for Cu discs, 28.1 ± 4.1 for Ni/Cu discs, and 13.8 ± 2.6 MPa for Ag/Ni/Cu discs. Epitaxial crystal growth promotes on the discs with a good matching for the lattice constants between metallic nanoparticles and metallic disc surfaces, which leads to strong bonding. Copyright © 2013 John Wiley & Sons, Ltd.     

双金属/TiO2纳米管复合结构中增强的光电流

将传统半导体材料与金属微纳结构相结合,利用其表面等离激元共振效应,可有效地增强复合结构的光电转换效率,使其广泛地被用于光电化学和光电探测等领域.本文以氧化铝纳米管为模板,采用原子层沉积技术制备出高有序的TiO2纳米管,并通过电子束热蒸发技术在大孔径的纳米管薄膜中分别负载金、铝和双金属金/铝纳米颗粒,形成金属纳米颗粒/T...     

一种新的基于频域有限差分方法的小周期有机太阳能电池的光电特性

由MoO₃/Ag/MoO₃ （MAM）组成的多层膜结构非常有希望替代ITO作为有机太阳能电池中的透明阳极.然而,基于MAM结构的有机太阳能电池光吸收能力较弱.为此,引入了一种小周期短节距金属光栅,利用表面等离子激元增强活性层的光吸收.借助于频域有限差分方法求解麦克斯韦方程和半导体方程,探讨了有机太阳能电池结构的光学和电学性质.分析结果表明：与平面结构相比,活性层中的光吸收大大提高;同时,当凹槽宽度为4 nm,能量转换效率提高了49%.相关结果有助于更好地开发和利用无ITO层的有机太阳能电池.     

光学透明频率选择表面的设计研究

以氟化镁为基底材料, 采用基底、金属网栅与频率选择表面一体化设计方法设计了一种雷达波与光学波段双带通的结构. 利用模式匹配法对设计结构的传输特性进行了仿真研究, 并将设计结果与制备样件的测试结果进行了对比分析. 结果发现: 采用一体化设计的方法设计光学透明频率选择表面, 不仅能够快速得到电场基函数而且还能够准确预估其谐振尺寸, 从而在提高计算效率的同时避免了模式互作用零点的出现. 采用一体化设计方法获得了具有稳定滤波特性的光学透明频率选择表面, 为雷达/红外双模制导头罩的电磁屏蔽技术和隐身技术提供了一种有效技术方案. 关键词： 复合制导 频率选择表面 金属网栅 一体化设计     

金属盐对生物质热解特性影响试验研究

基于深入了解生物质热解行为的目的,在自行研制的热解机理试验台上系统研究了金属盐对生物质热解的影响规律。试验结果表明,钾离子对生物油中的一些大分子量组分发生重聚反应生成焦炭和小分子气体产物具有强烈的催化作用,从而降低了热解生物油产量而得到更多的焦炭和气体产物。相比钾离子而言,钙离子对焦炭生成的促进作用更为强烈;镁离子对白松热解的影响远没有钾离子和钙离子明显。     

大块金属玻璃Zr41Ti14Cu12.5Ni10Be22.5的流变行为研究

采用静态拉伸方法在连续升温条件下动态地测量了大块金属玻璃Zr41Ti14Cu12.5Ni10Be22.5（Vit1）的黏度随温度的变化关系.在应变速率与温度的关系曲线中，观测到了与玻璃转变和晶化过程相联系的多个应变速率峰.在玻璃转变温度Tg以上，大块金属玻璃Zr41Ti14Cu12.5Ni10Be22.5的过冷液体呈现Newton流体特征，其黏度与温度的关系符合Vogel Fulcher-Tammann (VFT)关系式，拟合得到脆度D*＝36，VFT温度T0＝319K，脆度参数m＝30，这说明Zr41T 关键词： 大块金属玻璃 应变速率 剪切黏度 自由体积