Controlled synthesis of CeO<Subscript>2</Subscript> nanoparticles using novel amphiphilic cerium complex precursors

Maleic anhydride was grafted by long-chain alcohols (1-hexadecanol, 1-octadecanol) to amphiphilic mono-L cis-butene dicarboxylates (L = hexadecyl, octadecyl), i.e., MAH, MAO, respectively. Subsequently, corresponding amphiphilic cerium complexes with these two mono-L cis-butene dicarboxylate ligands (Ce(L')₃, L'= MAH, MAO) were synthesized and behaved as the precursors to prepare CeO₂ nanoparticles for both of which can form nanosized micelle-like aggregates by special self-assembly in the wet chemical process. The nanoparticles were further characterized by Fourier transform-infrared spectroscopy (FTIR), Diffuse reflectance ultraviolet-visible spectra (DRUVS), scanning electron microscope (SEM), transmission electron microscope (TEM), and x-ray diffraction (XRD). Both the CeO₂ nanoparticles are in a cubic fluorite structure and present regular and well-dispersion club-like morphology with average particle size in the range of 40–70 nm. Besides, the strong ultraviolet–visible absorption for these CeO₂ nanoparticles can be found at the long-wavelength ultraviolet to visible region of 200–500 nm.     

傅里叶变换滤波-差分吸收光谱法在烟气SO_2在线监测中的应用研究

差分吸收光谱(DOAS)法是利用气体分子窄带吸收特征来测量气体浓度的一种新型的光谱测量技术。本文分析了紫外差分吸收光谱(DOAS)法检测SO2数值处理上的问题,提出傅里叶变换滤波分析方法。本方法可有效减少各种干扰对SO2浓度计算的影响,特别是对与SO2有重叠差分吸收光谱但有不同频谱特性且未知气体的干扰有很好的效果。     

Spectroscopic database of CO2 line parameters: 4300-7000 cm

A new spectroscopic database for carbon dioxide in the near infrared is presented to support remote sensing of the terrestrial planets (Mars, Venus and the Earth). The compilation contains over 28,500 transitions of 210 bands from 4300 to 7000 cm⁻¹ and involves nine isotopologues: ¹⁶O¹²C¹⁶O (626), ¹⁶O¹³C¹⁶O (636), ¹⁶O¹²C¹⁸O (628), ¹⁶O¹²C¹⁷O (627), ¹⁶O¹³C¹⁸O (638), ¹⁶O¹³C¹⁷O (637), ¹⁸O¹²C¹⁸O (828), ¹⁷O¹²C¹⁸O (728) and ¹⁸O¹³C¹⁸O (838). Calculated line positions, line intensities, Lorentz half-width and pressure-induced shift coefficients for self- and air-broadening are taken from our recent measurements and are presented for the Voigt molecular line shape. The database includes line intensities for 108 bands measured using the McMath-Pierce Fourier transform spectrometer located on Kitt Peak, Arizona. The available broadening parameters (half-widths and pressure-induced shifts) of ¹⁶O¹²C¹⁶O are applied to all isotopologues. Broadening coefficients are computed using empirical expressions that have been fitted to the experimental data. There are limited data for the temperature dependence of widths and so no improvement has been made for those parameters. The line intensities included in the catalog vary from 4×10⁻³⁰ to 1.29×10⁻²¹ cm⁻¹/(molecule cm⁻²) at 296 K. The total integrated intensity for this spectral interval is 5.9559×10⁻²⁰ cm⁻¹/(molecule cm⁻²) at 296 K.     

Photothermally controlled 50 mA gating in VO2-based planar device using NIR laser diode

By utilizing a near infrared laser diode as an excitation light source, we demonstrated a photothermally controlled current gating of 50 mA in a two-terminal planar device based on a vanadium dioxide (VO₂) thin film grown by a pulsed laser deposition method. The photothermally controlled on/off triggering of the device current was accomplished by controlling the output power of the laser beam that illuminated the VO₂ film. The transient responses of photothermally triggered currents were analyzed when periodical laser pulses from the laser diode stimulated the VO₂ device at a variety of pulse widths and repetition rates. A switching contrast between off-state and on-state currents was evaluated as ∼11905, and average rising and falling times were measured as ∼45 and ∼19 ms, respectively.     

A Novel [OSSO]-Type Chromium(III) Complex as a Versatile Catalyst for Copolymerization of Carbon Dioxide with Epoxides

A new chromium(III) complex, bearing a bis-thioether-diphenolate [OSSO]-type ligand, was found to be an efficient catalyst in the copolymerization of CO₂ and epoxides to achieve poly(propylene carbonate), poly(cyclohexene carbonate), poly(hexene carbonate) and poly(styrene carbonate), as well as poly(propylene carbonate)(cyclohexene carbonate) and poly(propylene carbonate)(hexene carbonate) terpolymers.     

Hierarchical Mn3O4 Anchored on 3D Graphene Aerogels via C−O−Mn Linkage with Superior Electrochemical Performance for Flexible Asymmetric Supercapacitor

Flexible asymmetric supercapacitors are more appealing in flexible electronics because of high power density, wide cell voltage, and higher energy density than symmetric supercapacitors in aqueous electrolyte. In virtues of excellent conductivity, rich porous structure and interconnected honeycomb structure, three dimensional graphene aerogels show great potential as electrode in asymmetric supercapacitors. However, graphene aerogels are rarely used in flexible asymmetric supercapacitors because of easily re-stacking of graphene sheets, resulting in low electrochemical activity. Herein, flower-like hierarchical Mn₃O₄ and carbon nanohorns are incorporated into three dimensional graphene aerogels to restrain the stack of graphene sheets, and are applied as the positive and negative electrode for asymmetric supercapacitors devices, respectively. Besides, a strong chemical coupling between Mn₃O₄ and graphene via the C-O-Mn linkage is constructed and can provide a good electron-transport pathway during cycles. Consequently, the asymmetric supercapacitor device shows high rate cycle stability (87.8 % after 5000 cycles) and achieves a high energy density of 17.4 μWh cm⁻² with power density of 14.1 mW cm⁻² (156.7 mW cm⁻³) at 1.4 V.     

Synthesis and electrochemical properties of copper(II), manganese(III) phthalocyanines bearing chalcone groups at peripheral or nonperipheral positions

In this study, new chalcone compound 1 , new phthalonitrile derivatives 2 and 3, new copper(II), manganese(III) phthalocyanines bearing chalcone groups at peripheral or nonperipheral positions were synthesized. Electrochemistry of tetra-(4-{(2 E )-3-[2-fluoro-4-(trifluoromethyl)phenyl]prop-2-enoyl}phenoxy) substituted Co(II)Pc and Mn(III)Pcs were studied with cyclic voltammetry (CV) to determine the redox properties of the phthalocyanines. According to the results, while the CuPcs 2a and 3a showed two Pc based reduction reactions and one Pc based oxidation reaction, MnPcs 2b and 3b gave two metal-based reduction reactions. All the redox processes are shifted toward positive potentials as a result of the increased electron-withdrawing ability of the trifluoromethyl substituents.     

石墨毡载纳米δ-MnO2高性能除铵净水材料研究

首先制备了α-MnO₂纳米花簇、β-MnO₂纳米针和δ-MnO₂微米颗粒三种不同晶型的MnO₂粉末材料,对其结构、形貌及吸附除铵能力进行了表征和测试.结果表明,层间距（7.2Å）大于NH₄⁺直径（2.96Å）和水合NH₄⁺直径（6.62Å）的δ-MnO₂相比其他两种晶型的MnO₂有更高的NH₄⁺吸附量;接着研究采用KMnO₄原位氧化还原法在石墨毡（GF）上直接生长超薄δ-MnO₂纳米片（MnO₂NPs）阵列构筑了石墨毡载纳米MnO₂（MnO₂NPs/GF）多级结构材料,制备简单,无须成型造粒就可直接用作除铵净水材料,研究结果表明,MnO₂NPs/GF不仅具有较高的吸附量（15 mg·g^－1）与良好的选择性,同时还展现了优异的快速吸附和稳定的循环使用性能.MnO₂NPs/GF对水中NH₄⁺的吸附符合准二级动力学模型,其吸附等温线符合Langmuir吸附等温式,是吸附-离子交换法除铵的理想材料.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶 凝胶法以磷钼酸 (MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2 催化剂 .使用ICP、XRD、TG DTA、IR、TPD MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能 .杂多钼酸盐与TiO2 通过O2 -在TiO2 表面发生了键合 .在 6 2 3K下 ,杂多阴离子仍保持原有的Keggin结构 .CO2 在Lewis酸位Ni(Ⅱ )和Lewis碱位Ni-O -Mo的桥氧协同作用下生成CO2 卧式吸附态Ni(Ⅱ )←O - (CO)← (O--Ni) .丙烯有多种吸附态在催化剂上吸附 .在 5 6 3K、1MPa和空速 15 0 0h-1的反应条件下 ,丙烯的摩尔转化率为 3.2 % ,产物MAA选择性为 95 % .