矩形截面多量子阱脊形波导模式特性

本文根据多量子阱双折射率的性质,运用有效折射率法分析了矩形截面多量子阱脊形波导E_mn^x模和模E_mn^y的模式特性。     

Study on improving output capability of high-power lasers providing short pulses by using different laser glasses together in the amplifier chain

We have discussed the optical and laser properties of different laser glass types. According to the properties of the gain and the B integral in the high-power laser amplifier chain, an optimal configuration is pointed out to improve the output capability at short pulses based on reducing nonlinear refractive index n₂. In this way, high gain glasses and low n₂ glasses are used in different amplifier stages simultaneously. The simulated results show that on the condition that the maximal output energies of both the configurations are same at 3 and 5 ns, the maximal output capability growth ratio of 30.48% () and 42.24% () for the optimal configuration can be obtained at 1 ns, respectively.     

基于包层模的光纤布拉格光栅折射率传感特性

提出了基于光纤布拉格光栅(FBG)包层模式的折射率传感方案。实验中,利用不同浓度的丙三醇水溶液作为外界折射率传感溶液,采用氢氟酸溶液化学腐蚀的方法来减小光纤包层的直径以增大包层模式对外界折射率的敏感度,研究了腐蚀后光纤布拉格光栅包层模式的耦合波长对外部折射率的变化关系。实验结果表明在1.3300~1.4584的折射率范围内,包层模式耦合波长随外界折射率增大而增大,在接近光纤包层折射率处具有很高的折射率灵敏度,最大达到了172 nm/riu(refractive index unit)。而且,包层模谐振的光谱半峰全宽(约0.07 nm)仅为布拉格纤芯模谐振光谱半峰全宽的1/4,能够获得更好的传感精度。     

菌紫质薄膜光致折射率变化的理论计算和实验测量

基因改性细菌视紫红质BR-D96N由于M态寿命的延长而具有显著的光致变色特性.根据Kramers-Kronig变换关系,样品吸收光谱的变化会引起样品折射率的变化.本文首先从实验上测量了BR-D96N薄膜样品在光激发前后的吸收光谱,然后根据Kramers-Kronig变换关系,理论计算了对应此光致变色光谱变化的光致折射率变化光谱.实验上为了直接测量样品的光致折射率变化,采用Michelson干涉方法测量BR-D96N薄膜在不同探测波长下的光致折射率变化量,并与理论计算曲线进行了比较.     

一种新型温度自补偿高灵敏度折射率计

基于高频CO2激光脉冲写入的新型超长周期光纤光栅(ULPFG),提出了一种可实现温度自补偿的新型高灵敏度折射率计。理论与实验表明,新型超长周期光纤光栅不同闪耀阶次谐振峰对外界折射率与温度变化的灵敏度各自不同,特别的是,该光栅存在对外界折变不敏感的谐振峰,测量中除了可以利用该峰实现温度同时测量外,还可以补偿另一个测量折变的谐振峰因温度变化带来的测量误差。该折射率计具有制作简单、成本低、强度好,灵敏度高等优点,当外界折射率在1.43~1.45范围内变化时,其折射率测量灵敏度可达每单位折射率240 nm,在实际工业应用中具有较大的潜在实用价值。     

Effects of Refractive Index and Viscosity on Fluorescence and Anisotropy Decays of Enhanced Cyan and Yellow Fluorescent Proteins

The fluorescence lifetime strongly depends on the immediate environment of the fluorophore. Time-resolved fluorescence measurements of the enhanced forms of ECFP and EYFP in water–glycerol mixtures were performed to quantify the effects of the refractive index and viscosity on the fluorescence lifetimes of these proteins. The experimental data show for ECFP and EYFP two fluorescence lifetime components: one short lifetime of about 1 ns and a longer lifetime of about 3.7 ns of ECFP and for EYFP 3.4. The fluorescence of ECFP is very heterogeneous, which can be explained by the presence of two populations: a conformation (67% present) where the fluorophore is less quenched than in the other conformation (33% present). The fluorescence decay of EYFP is much more homogeneous and the amplitude of the short fluorescence lifetime is about 5%. The fluorescence anisotropy decays show that the rotational correlation time of both proteins scales with increasing viscosity of the solvent similarly as shown earlier for GFP. The rotational correlation times are identical for ECFP and EYFP, which can be expected since both proteins have the same shape and size. The only difference observed is the slightly lower initial anisotropy for ECFP as compared to the one of EYFP.     

Bimetallic Silver-Gold Film Waveguide Surface Plasmon Resonance Sensor

It is desirable that a surface plasmon resonance (SPR) sensor is highly sensitive to binding interactions within the sensing region, generate evanescent fields with long penetration depths, and utilize a metal film that is very stable even in extreme environmental conditions. In this study, we present the first example of a wavelength-modulated waveguide SPR sensor with a bimetallic silver-gold film for surface plasmon excitation. The underlying silver yields better evanescent field enhancement of the sensing surface, while the overlying gold ensures that the stability of the metallic film is not compromised. It is shown experimentally that in terms of dλ/dn, the bimetallic film waveguide SPR configuration has a sensitivity of 1232 nm/RIU, greater than two times improvement from the 594 nm/RIU achievable with single gold film waveguide SPR sensor. The higher sensitivity, compact nature, and better evanescent field enhancement of this configuration provides the potential to biosensing applications.     

Effect of magnetic fields on the linear and nonlinear intersubband optical absorption coefficients and refractive index changes in square and graded quantum wells

In this study, both the intersubband optical absorption coefficients and the refractive index changes as dependent on the magnetic field are calculated in square and graded quantum wells. Our results show that the position and the magnitude of the linear and total absorption coefficients and refractive index changes depend on the magnetic field strength and the shape of potential. The incident optical intensity has a great effect on the total absorption and refractive index changes.     

一维函数光子晶体的研究

本文提出一种新型函数光子晶体, 其折射率是空间位置函数. 由费马原理, 我们给出光在一维、 二维和三维函数光子晶体中的运动方程, 以及一维函数光子晶体的色散关系、 带隙结构和透射率, 再利用传输矩阵理论研究函数光子晶体周期数、 入射角和介质层的厚度等对透射率和禁带结构的影响, 计算发现通过选择不同的折射率空间分布函数, 可以得到比传统光子晶体更宽或更窄的禁带结构. 这样为我们设计不同带隙结构的光子晶体提供理论依据.     

Optical and conductive properties of AlSi-alloy/SiCp composites: application in modelling CO2 laser processing of composites

The optical properties—reflectivity, real part of the refractive index, absorption coefficient as well as the thermal and electrical conductivity of AlSi-alloy/SiC_p composite were measured. The optical parameters and both conductivities decreased with the increase of SiC_p particles volume in AlSi-alloy matrix. This decrease was almost linear for the volume fraction of SiC_p particle up to 10 vol% of the total mass of the composite. For the 15 vol% of SiC_p particles, the departure from linearity is connected with the presence of additional phases in AlSi-alloy/SiC_p composite materials. The measured temperature dependencies of optical reflectivity and electrical conductivity for AlSi-alloy/SiC_p 15 vol% are of metallic character. Modelling of the interaction of the CO₂ laser radiation with AlSi-alloy/SiC_p 15 vol% composite should allow to estimate the initiation time at which the surface composite reaches melting temperature.