Intra–intermolecular gel-free cyclopolymerization of nonconjugated diene with peroxodiphosphate/different activators redox pairs

Gel-free cyclopolymerization of N,N′-methylenebisacrylamide has been carried out using potassium peroxodiphosphate (PDP) as initiator in combination with different activators such as mercaptosuccinic acid (MSA) and thioglycollic acid (TGA) in an inert atmosphere at 45 ± 1°C and 40 ± 1°C, respectively. The rate of polymerization was found proportional to the first power of the monomer and activator concentration and the half-power of PDP in both redox systems. A mechanism involving cyclopolymerization in the propagation path has been proposed. © 1993 John Wiley & Sons, Inc.     

Parameter Determination for Reductive Dechlorination of Chlorinated Solvents

The contamination of subsurface due to the chlorinated solvents such as tetrachlorethylene (PCE) and trichlorethylene (TCE) is one of the most difficult environmental problems to treat. Bioremediation has been shown by many researchers to be a remedial alternative for this type of contamination. Chlorinated solvents are not directly mineralized but rather are transformed by microorganisms into one or more intermediate compounds before converting into a final compound. These sequential reactions, termed “reductive dehalogenation”, consist of replacing a chlorine atom by a hydrogen atom. The pathway of degradation of PCE can be expressed by the following scheme PCE → TCE → DCE → VC → ETH, where dichloroethene (DCE), vinyl chloride (VC) and finally ETH is ethylene. Since the biotransformation rate coefficients of each intermediate compound are different, they have to be determined very precisely to establish an effective treatment operation. The sequential decay can be described by Michaelis–Menten’s kinetics, which constitutes a highly nonlinear system of ordinary differential equations (ODEs). This is very sensitive to the changes of biotransformation rate coefficients. In this study we introduce a methodology how to numerically estimate the rate coefficients for Michaelis–Menten’s equations from the knowledge of the concentrations of PCE, TCE, DCE, VC and ETH. The efficiency of the proposed method is demonstrated on some examples. Estimated biotransformation coefficients are employed to predict the concentrations of chlorinated solvents. Computations and measurements show a very good agreement.     

Atom transfer radical polymerization of ionic liquid 2‐(1‐butylimidazolium‐3‐yl)ethyl methacrylate tetrafluoroborate

Polymeric forms of ionic liquids may have many potential applications because of their high thermal stability and ionic nature. They are generally synthesized by conventional free‐radical polymerization. Here we report a living/controlled free‐radical polymerization of an ionic liquid monomer, 2‐(1‐butylimidazolium‐3‐yl)ethyl methacrylate tetrafluoroborate (BIMT), via atom transfer radical polymerization. Copper bromide/bromide based initiator systems polymerized BIMT very quickly with little control because of fast activation but slow deactivation. With copper chloride as the catalyst and trichloroacetate, CCl₄, or ethyl α‐chlorophenylacetate as the initiator, BIMT was polymerized at 60 °C in acetonitrile with first‐order kinetics with respect to the monomer concentration. The molecular weight was linearly dependent on the conversion. The monomer concentration strongly affected the polymerization: a low monomer concentration caused the polymerization to be incomplete, probably because of catalyst disproportionation in polar solvents. The addition of a small amount of pyridine suppressed such disproportionation, but a further increase in the amount of pyridine greatly slowed the polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5794–5801, 2004     

Synthesis of polymeric microspheres from a Merrifield resin by surface‐initiated nitroxide‐mediated radical polymerization

Polymeric microspheres were prepared from a Merrifield resin via nitroxide‐mediated radical polymerization. Polystyrene, poly(acetoxystyrene), and poly[styrene‐b‐(methyl methacrylate‐co‐styrene)], poly(acetoxystyrene‐b‐styrene), and poly(styrene‐co‐2‐hydroxyethyl methacrylate) copolymers were demonstrated to graft onto 2,2,6,6‐tetramethyl‐1‐piperidinyloxy nitroxide bound Merrifield resins. The polymerization control was enhanced both on the surface and in solution by the addition of sacrificial nitroxide. The significant increase in the particle diameter (more than a fivefold volume increase for polystyrene brushes) showed that polymer growth was not only on the surface but also within the particles, and this diameter increase could be adjusted through changes in the molecular weight of the polymers. The microspheres were characterized by elemental analysis, IR spectroscopy, particle size analysis, and optical microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2145–2154, 2005     

Anionic polymerization of styrenic macromonomers of polyisoprene,polybutadiene, and polystyrene

Anionic polymerization and high‐vacuum techniques were used to prepare a series of well‐defined polyisoprene, polybutadiene, and polystyrene polymacromonomers. The procedure involved (1) the synthesis of styrenic macromonomers in benzene by the selective reaction of the corresponding macroanion with the chlorine of 4‐(chlorodimethylsilyl)styrene (CDMSS) and (2) the in situ anionic polymerization of the macromonomer without previous isolation. The synthesis of the macromonomers [polyisoprene macromonomer: 11 samples, weight‐average molecular weight (M_w) = 1000–18,000; polybutadiene macromonomer: 5 samples, M_w = 2000–4000; and polystyrene macromonomer: 2 samples, M_w = 1300 and 3600] was monitored by size exclusion chromatography with refractive index/ultraviolet detectors. Selectivity studies with CDMSS indicated that polybutadienyllithum had the highest selectivity, and polystryryllithium the lowest. From kinetic studies it was concluded that the polymerization half‐life times were longer but comparable to those of styrene, and they appeared to only slightly depend on the molecular weight of the macromonomer chain (at least for low degrees of polymerization of the polymacromonomer and for M_w < 7000 for the macromonomer side chain). Dependence on the polymerization degree of the polymacromonomer product was also observed. All the prepared polymacromonomers were characterized by size exclusion chromatography with refractive index, ultraviolet and two‐angle laser light scattering detectors, and NMR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1038–1048, 2005     

KINETIC STUDY OF THE OXIDATIVE COUPLING OF METHANE OVER La_2O_3/BaSO_4 CATALYST

IntroductionOxidativccouplingofmethanc(0CM)hasbccnthcsubjcctofmuchintcrcstrcccntl}Man}'mctaloxides,alkali-mctaI-promotcdmctaloxidcs-mixcdmcta1oxidcsandchlorinc-prom0tedmCtuloxidcshavcbecnf0undtobcactivcfor0CMHot` cvcr.thcrcisatprcscntnoclearagreemcntaboutthcmcchanismofthecouplingrcaction.T\`omodclsll1.thcthdeal-rcdoxandthcLangmuir-Hinshtt-oodmcchanisms.havcbccndcvcIopcdtodcscr1bc0CMreation-thecsscntialdiffercnccbctt"ccnthctt"omodclsisthatthclattcrinvolvcsadsorbedmothancasarcactionintcrmcd…     

Adatom concentration on GaAs(001) during MBE annealing

We study the concentration of adatoms on GaAs(001) during annealing under MBE conditions. By rapidly cooling the sample from typical growth temperatures and typical As overpressures, the thermal concentration of adatoms can be frozen into small islands on the terraces. The area of the resulting islands is measured with STM far from terrace steps, giving an estimate of the concentration of adatoms during equilibrium. We find that a surprisingly large concentration of adatoms is present for typical growth temperatures, e.g. 0.18 monolayer at 600°C. Possible consequences for current growth models are discussed.     

Study of kinetics and mechanism of the acid dissociation of copper(II) complex of novel C-functionalized macrocyclic dioxotetraamines

The kinetics of the acid dissociation of copper(II) complexes of novel C-functionalized macrocyclic dioxotetraamines has been studied by means of a stopped-flow spectrophotometer. The acid dissociation rate follows the law V_d = C_comkK₁K₂H ²/(1+K₁H+K₁K₂H ²). From the experimental facts we have obtained, the dissociation kinetics are interpreted by a mechanism involving the negatively charged carbonyl oxygen of the complex being rapidly protonated in a pre-equilibrium step, the rate-determining step being intramolecular hydrogen (enolic tautomer) migration (to imine nitrogen). The dissociation rate reached a plateau in the strongly acidic solution. By means of temperature coefficient method, ΔH ^φ, ΔS ^φ of the pre-equilibrium step and ΔH ^≠, ΔS^≠ of the rate-determining step were obtained. The results of 13-membered macrocyclic dioxotetraamines have been discussed. The influence of the substituents to the acid dissociation rates has also been discussed. The Bronsted type linear free energy relationships do also exist in these C-functionalized dioxotetraamine copper(II) complexes.     

Crosslinking study of polyethers containing pendent double bonds

This article studies the crosslinking reactions of some polyethers containing double bonds on the side chains. Thermal crosslinking takes place in all cases, but is overlapped by the degradation process. So, a catalyst has to be used to obtain the cured material and avoid degradation. The best initiator appears to be dicumyl peroxide and the maximum cross-linking degree is achieved only with 5% (w/w). Thermogravimetric analyses are used to test the quality of the cured materials. IR spectroscopy shows that crosslinking actually takes place by polymerizing pendent double bonds. Furthermore, activation energies for thermal and radical initiated crosslinking are determined by means of dynamic DSC studies. © 1995 John Wiley & Sons, Inc.