New Type High Efficient Quasi-Solid-State Ionic Liquid Electrolyte for Dye-Sensitized Solar Cells

For the fist time the preparation of a mostly solid-state high efficiem electro-conductive material comprising 1-methyl-3-propylimidazolium iodide （MPII）, benzimidazole （BI）, iodine and lithium iodide was reported. In this electrolyte, BI acts as not only additives but also gelators. With its significant electrochemical properties, an overall efficiency of 3.07% was achieved under AM 1.5 （100 mW/cm^2）.     

Efficient combination of task-specific ionic liquid and microwave dielectric heating applied to one-pot three component synthesis of a small library of 4-thiazolidinones

The first report of the use of task-specific ionic liquid as synthetic equivalent of ionic liquid-phase matrice for the preparation of a small library of 4-thiazolidinones is reported in this paper. The starting (ethyleneglycol)ionic liquid-phase is functionalized in good yields with 4-(formylphenoxy)butyric acid by using usual esterification reaction conditions (DCC/DMAP as catalyst). The synthesis of the ionic liquid-phase bound 4-thiazolidinones was performed by a one-pot three-component condensation under microwave dielectric heating. The final cleavage under microwave/catalysis strategy provides the expected 4-thiazolidinones in high purity after flash-chromatography purification. According to the ionic liquid-phase organic synthesis (IoLiPOS) methodology, it was found that optimized reaction conditions were performed by standard analytical methods (NMR, TLC). The ¹H, ¹³C NMR spectrum of some representative 4-thiazolidinones and ionic liquid-phase bound benzaldehyde are also reported.     

Methods of theoretical study of vibrational phenomena in liquids--comparative analysis

In this review, existing theoretical models of vibrational phenomena in liquids are analyzed and compared. Most attention is paid to sonoluminescence, sonolysis and related phenomena. The criteria of selection of the optimal theoretical model involve analyzing experimental results, its usefulness for evaluation of thermodynamic and other parameters of the liquid under vibration, simplicity of the mathematical solution and the time needed for computing. It is concluded that, according to these criteria, the optimal (between existing models) is the chemical model of vibration in liquid, while the best perspectives are for its combinations with other models.     

The systems Zr(Nb,Ti)(R)O2−δ, R=Yb, Ca—optimization of mixed conductivity and comparison with results of other systems (R=Y and Gd)

In this work we address the optimization of mixed conductivity in fluorite compounds based on zirconia. Phase relations of the new systems YbO_1.5-NbO_2.5-ZrO₂, and CaO-NbO_2.5-ZrO₂ are presented. The limit of the cubic defect fluorite phase in YbO_1.5-NbO_2.5-ZrO₂ closely resembles that of the system YO_1.5-NbO_2.5-ZrO₂, whilst in CaO-NbO_2.5-ZrO₂ is narrow extending to include composition Ca_0.255Nb_0.15Zr_0.595O_1.82 at 1500°C. The influence of dopant ion size, charge and composition on ionic conduction is assessed and parallels are drawn with the systems YO_1.5-NbO_2.5-ZrO₂ and YO_1.5-TiO₂-ZrO₂. Comparison of these results with published data on the Ti containing systems CaO-TiO₂-ZrO₂, GdO_1.5-TiO₂-ZrO₂ shows that the highest mixed conducting compositions can only be offered in the system YO_1.5-TiO₂-ZrO₂ out of all the systems here studied.     

Substitution reactions in ionic liquids. A kinetic study

The rate of the substitution reaction of (R)-3-chloro-3,7-dimethyloctane (1) with either methanol or benzyl alcohol in mixtures containing the ionic liquid [Bmim][N(CF₃SO₂)₂] was monitored using ³⁵Cl NMR spectroscopy. The enantiomeric excess of the product, (S)-3-methoxy-3,7-dimethyloctane (2a), was analyzed using chiral gas chromatography. This product showed a decreasing enantiomeric excess with increasing concentration of ionic liquid. The rate of reaction of substrate 1 in each case varied with the concentration of the ionic liquid. Polarity measurements of the solvent mixtures were undertaken by standard methods, which are compared both to each other and to the observed rates. Solvent reorganization and selective solvation are also each proposed as contributing to the difference in the observed rates of reaction.     

离子液体BMIBF4性质的研究

用最大气泡法和韦氏天平法, 在278.15～343.15 K范围内测定了离子液体BMIBF₄的表面张力和密度; 讨论了这个离子液体的体积性质和表面性质; 根据离子个头大又极不对称的特点, 提出了离子液体的空隙模型. 根据空隙模型计算的离子液体恒压热膨胀系数与实验值相比, 偏差在10%左右.     

液相组合合成的纯化方法

综述了近8年来液相平行合成和组合合成中应用的不同技术, 包括可溶性载体、氟合成技术、离子液体、固相试剂树脂以及低聚乙烯二醇(OEG)衍生物的应用等几方面内容. 论述了它们的基本原理以及相关的应用实例, 并着重强调了目标化合物的分离纯化方法.     

Additivity Factors in the Binding of the Diethyltin(IV) Cation by Ligands Containing Amino and Carboxylic Groups at Different Ionic Strengths

Complex formation constants were determined potentiometrically (by a ISE-H⁺, glass electrode) in the systems, M²⁺ – L^z – H⁺ [M²⁺ = (C₂H₅)₂Sn²⁺, L^z = malonate, glycinate and ethylenediamine] at t = 25 ^∘C and 0.1 mol-L⁻¹≤ I/ ≤ 1 mol-L⁻¹ in NaCl_aq (0.1 mol-L⁻¹ ≤ I ≤ 0.75 mol-L⁻¹ for the ethylenediamine system). Thermodynamic values of formation constants, at infinite dilution, are [± 95% confidence interval, ^Tβ_pqr refer to the equilibrium, pM²⁺ + qL^z + rH⁺ = M_pL_qH_r^(2+z+r)]: for malonate, log₁₀ ^Tβ₁₁₀ = (5.47 ± 0.10); for glycinate, log₁₀ ^Tβ₁₁₀ = (9.54 ± 0.08), log₁₀ ^Tβ₁₁₁ = (12.97 ± 0.10); and for ethylenediamine, log₁₀ ^Tβ₁₁₀ = (10.47 ± 0.10), log₁₀ ^Tβ₁₂₀ = (16.17 ± 0.12) and log₁₀ ^Tβ₁₁₁ = (15.46 ± 0.10). The dependence on ionic strength of the formation constants was modeled by a simple Debye–Hückel type equation and by the SIT approach. By analyzing the stability of the species in the three different systems we found a simple additivity rule that can be expressed by the relationship: log₁₀ K = 6.46 n_N + 3.96 n_O − 0.60 (n_N²+ n_O²), with a mean deviation, ε(log₁₀ K) = 0.15 (K = equilibrium constant for the interaction of the organometal cation with the unprotonated or protonated ligand, n_N = number of amino groups and n_O = number of carboxylic groups of the ligand(s) involved in the formation reaction of complex species).     

Electrochemical Determination of Ascorbic Acid in Room Temperature Ionic Liquid BPPF6 Modified Carbon Paste Electrode

A room temperature ionic liquid N‐butylpyridinium hexafluorophosphate (BPPF₆) was used as a binder to make an ionic liquid modified carbon paste electrode (IL‐CPE), which showed good characteristics such as simple preparation procedure, fast electrochemical response and good conductivity. The electrochemical oxidation of ascorbic acid (AA) on the new IL‐CPE was carefully studied. The oxidation peak potential of AA on the IL‐CPE appeared at 109 mV (vs. SCE), which was about 338 mV decrease of the overpotential compared to that obtained on the traditional carbon paste electrode (CPE) and the oxidation peak current was increased for about four times. The electrochemical parameters of AA on the IL‐CPE were calculated with the charge transfer coefficient (α) and the electrode reaction rate constant (k_s) as 0.87 and 0.800 s^?1, respectively. Based on the relationship of the oxidation peak current and the concentration of AA a sensitive analytical method was established with cyclic voltammetry. The linear range for AA determination was in the range from 1.0×10^?5 to 3.0×10^?3 mol/L with the linear regression equation as I_p (μA)=?2.52–0.064C (μmol/L) (n=13, γ=0.9942) and the detection limit was calculated as 8.0×10^?6 mol/L (3σ). The proposed method was free of the interferences of coexisting substances such as dopamine (DA) and amino acids etc., and successfully applied to the vitamin C tablets determination.