The generation of three-dimensional internal waves and attendant boundary layers in a viscous continuously stratified fluid. Construction of an analytical solution

An analytical solution of a linearized problem of the emission of periodic internal waves by part of a plane which oscillates with a small amplitude in an arbitrary direction in a viscous exponentially stratified fluid is constructed. Solutions of the dispersion equation are given for all positions of the emitting surface (arbitrary, vertical, horizontal, and critical when one of the beam propagation directions is collinear with the emitting surface). The possibility of transition to the case of a uniform fluid, which is important for applications, is analyzed.     

ON THE ASYMPTOTIC BEHAVIOUR OF THE STEADY SUPERSONIC FLOWS AT INFINITY

This paper studies the asymptotic behaviour of steady supersonic flow past a piece-wise smooth corner or bend. Under the hypothese that both vertex angle and the total variation of tangent along the boundary are small, it is shown that the solution can be obtained by a modified Glimm scheme, and that the asymptotic behaviour of the solution is determined by the velocity of incoming flow and the limit of the tangent of the boundary at infinity.     

全内反射荧光显微术应用于单分子荧光的纵向成像

利用这种显微术中激发场的纵向强度呈指数衰减的分布特性，测得的荧光强 度将强烈依赖渗透深度（强度衰减到1/e时的距离），从而快速直接的确定单分子荧光 团间的纵向间隔、每个荧光团的纵向绝对位置和荧光团的半径大小，即实现荧光分子三维分 布的重构.在整个重构的过程中，只需要改变一次入射角的大小，即只需探测两幅荧光分子 的全内反射成像. 关键词： 全内反射荧光显微术 纵向重构     

同轴相移数字全息中相移角的选取及相移误差的消除

基于两步同轴相移数字全息,首先从理论上分析了记录时不同相移角的选取及相移误差对再现像的影响,并给出了一种利用再现像所有抽样点的强度偏差之和作为评价标准,通过逐步改变理论设定相移角值来寻找实际相移角的相移误差消除新方法;其次对二步相移数字全息中记录时参考光波最佳相移角的选取作了计算机模拟,发现只有将参考光波的相移角选择在一定范围内,再现像的噪声较小;最后利用计算机模拟了相移误差消除,验证了所提方法的可行性.     

机载海洋激光测深系统参量设计与最大探测深度能力分析

详细讨论了机载海洋激光测深系统最大测量深度与相关因子之间的关系，并利用最小可探测信噪比为判据，对机载海洋激光测深系统在白天和晚上工作进行了数值模拟，通过比较最大测量深度与激光脉冲峰值功率、接收视场角、接收口径和光谱接收带宽等关系，确定了系统的主要参量。以确定的参量建立的系统具有白天49m和晚上65m的最大测深能力，可完全满足在沿岸带以及岛礁的测量要求。     

用毛细管测量纯水表面张力系数的误差讨论

通过用毛细管测量纯水表面张力系数实验，得到管内径d与接触角θ的相对误差之间的关系曲线，由此说明实验测得的表面张力系数α和理论公式相比呈现一定的偏差，并简单地讨论了实验的理想状态与实际情况的差别．     

A thermodynamic approach with internal variables using Lagrange formalism. Part I: General framework

We present some reflections on the application of the Lagrangian formalism for continuous media locally uniform subjected to internal irreversible evolutions. The Lagrangian density, defined as the time derivative of a non-equilibrium thermodynamic potential, [Thermodynamics of Relaxation Processes using Internal variables within a Lagrange-formalism. P. Germain’s Anniversary Volume 2000. Contiuum Thermomechanics: the Art and Science of Modeling Matter’s Behaviour, 2000], contains all the symmetry properties of the system. The generalised Lagrange co-ordinates correspond to the state and internal variables of the time derivative of the generalised Gibbs potential. The latter being used within the framework of the De Donder’s method, must also account for the memory effect of the physical medium.This first part is devoted to the thermodynamic framework called the distribution of non-linear relaxations approach (DNLR) developed by C. Cunat on the basis of the generalised Gibbs’ relation.     

Nano-tribological study on a super-hydrophobic film formed on rough aluminium substrates

A novel super-hydrophobic stearic acid (STA) film with a water contact angle of 166^o was prepared by chemical adsorption on aluminum wafer coated with polyethyleneimine (PEI) film. The micro-tribological behavior of the super-hydrophobic STA monolayer was compared with that of the polished and PEI-coated Al surfaces. The effect of relative humidity on the adhesion and friction was investigated as well. It was found that the STA monolayer showed decreased friction, while the adhesive force was greatly decreased by increasing the surface roughness of the Al wafer to reduce the contact area between the atomic force microscope (AFM) tip and the sample surface to be tested. Thus the friction and adhesion of the Al wafer was effectively decreased by generating the STA monolayer, which indicated that it could be feasible and rational to prepare a surface with good adhesion resistance and lubricity by properly controlling the surface morphology and the chemical composition. Both the adhesion and friction decreased as the relative humidity was lowered from 65% to 10%, though the decrease extent became insignificant for the STA monolayer. The project supported by the National Natural Science Foundation of China (50375151, 50323007, 10225209) and the Chinese Academy of Sciences (KJCX-SW-L2)     

路径对摩擦力做功的影响

本文通过讨论两种临界情况下摩擦力所做的功的变化情况，进一步阐明非保守力做的功与路径有关．     

Wide‐angle X‐ray diffraction and differential scanning calorimetry study of the crystallization of poly(ethylene naphthalate), poly(butylene naphthalate), and their copolymers

The crystallization behavior of a series of poly(ethylene‐co‐butylene naphthalate) (PEBN) random copolymers was studied. Wide‐angle X‐ray diffraction (WAXD) patterns showed that the crystallization of these copolymers could occur over the entire range of compositions. This resulted in the formation of poly(ethylene naphthalate) or poly(butylene naphthalate) crystals, depending on the composition of the copolymers. Sharp diffraction peaks were observed, except for 50/50 PEBN. Eutectic behavior was also observed. This showed isodimorphic cocrystallization of the PEBN copolymers. The variation of the enthalpy of fusion of the copolymers with the composition was estimated. The isothermal and nonisothermal crystallization kinetics were studied. The crystallization rates were found to decrease as the comonomer unit content increased. The tensile properties were also measured and were found to decrease as the butylene naphthalate content of the copolymers increased. For initially amorphous specimens, orientation was proved by WAXD patterns after drawing, but no crystalline reflections were observed. However, the fast crystallization of drawn specimens occurred when they were heated above the glass‐transition temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 843–860, 2004