Chemical Reactions in the Manufacture of Waveguides for Long Distance Optical Data Transmission

One of the modern high technologies which has advanced enormously in the last few years is glass fiber technology. This is used in the manufacture of glass fibers for lighting purposes and for the optical transfer of analog and digital data with a high transfer density. The technical demands made on the glass fibers required for data transfer, the optical waveguides, are extremely high and are already fulfilled to a large extent by industry. At present about four million kilometers of fiber, worth ca. 800 million DM are produced worldwide (10% in the Federal Republic of Germany). Numerous chemical processes take place during the manufacture of optical waveguides. However, in contrast both to the high and constantly growing demands on the quality and to the increasing production volume of such fibers, little is in fact known about the reactions involved. The present article will attempt to develop a picture of the multifarious reactions occurring in the course of this technical process on the basis of literature data and our own studies.     

8-羟基喹啉对甲基苯酚合锌配合物的合成及光致发光和电致发光性能

有机电致发光 ( EL )技术作为一种有着广阔应用前景的显示技术 ,自 1 987年 [1] 以来已获得了空前迅速的发展 .部分发光器件的亮度、效率和寿命已经达到或接近实用化的程度 .许多有机化合物 [2～ 5] ,包括小分子和聚合物 ,已被用于制备有机 LEDs.应用于有机 EL的化合物很多 ,这为优化和筛选优秀的 EL材料提供了基础 .以 8-羟基喹啉铝为代表的有机金属配合物是一类重要的有机 EL材料 ,这类材料荧光效率高、易于提纯且性质比较稳定 .目前应用于有机 EL金属配合物的发光材料大多配位数均为偶数 ,四配位的 8-羟基喹啉锌配合物 ( Znq2 ) [6…     

Enhanced electrodeposition of indium hexacyanoferrate thin films through improved plating solution stability

An ordinary plating solution for indium hexacyanoferrate (InHCF) thin film deposition, mainly composed of equal concentrations of In³⁺ and [Fe(CN)₆]^3–, usually forms precipitates rapidly when either concentration is higher than few millimolar. This contributes to the plating solution's instability. Moreover, electrodeposited capacities are limited accordingly. In this work, the plating solution's stability and the electrodeposition of InHCF were greatly enhanced by adding a large amount of K⁺ and/or H⁺. It was found that a 10-mM plating solution added with 1 M HCl and 1 M KCl could be stored as fresh over a one-week period, whereas an unmodified plating solution became useless within a couple of minutes. Also, such cationic additions, especially adding H⁺, increased the electrodeposited capacity ca. 18 times at least, as compared with that obtained from the unmodified plating solution. Furthermore, related enhancing mechanisms were proposed and verified. To sum up, this study offers a means for better InHCF electrodeposition and should promote the applications of InHCF films. Electronic Publication     

Characterisation of Sol-Gel TiO2 Films by Etching

This article describes the SmartKom Companion, one of three demonstrators developed within the SmartKom project whose goal has been to provide an intuitive and intelligent interface for non-expert users to everyday computer-based applications in different scenarios of use. Conceived for the SmartKom Mobile scenario, the Companion allows intuitive multimodal interaction for drivers and pedestrians. The development of the SmartKom prototypes was constantly accompanied by Wizard-of-Oz experiments as well as system evaluations at different stages of the project. Some usability evaluation results relative to the SmartKom Companion will also be presented.     

Fabrication of ultrathin films with large third-order nonlinear optical properties.

An ultrathin composite film containing anionic Ag-His complexes (His: L-Histidine) and oppositely charged BH-PPV was fabricated by means of the electrostatic layer-by-layer self-assembly technique. UV/Vis spectra showed a continuous deposition process of Ag-His complexes and BH-PPV. The film structure was characterized by using small-angle X-ray diffraction, AFM, and SEM. The nonlinear optical properties of the ultrathin film were studied by using the Z-scan technique with a laser duration of 8 ns at a wavelength of 532 nm. The film sample exhibited a strong nonlinear saturated absorption, with an alpha2 value of -3.9 x 10(-5) mW(-1) and a self-defocusing effect with an n2 value of -4.78 x 10 (-12) m2W(-1).     

Enzymatic kinetic of cellulose hydrolysis

The ethanol effect on the Trichoderma reesei cellulases was studied to quantify and clarify this inhibition type. To determine inhibition parameters of crude cellulase and purified exoglucanase Cel7A, integrated Michaelis-Menten equations were used assuming the presence of two inhibitors: cellobiose as the reaction product and ethanol as a possible bioproduct of cellulose fermentation. It was found that hydrolysis of cellulose by crude enzyme follows a model that considers noncompetitive inhibition by ethanol, whereas Cel7A is very slightly competitively inhibited. Crude cellulase is much more inhibited (K _iul=K _icl=151.9 mM) than exoglucanase Cel7A (K _icl=1.6 × 10¹⁵ mM). Also, calculated inhibition constants showed that cellobiose inhibition is more potent than ethanol inhibition both for the crude enzyme as well as exoglucanase Cel7A.     

Novel fiber-optic biosensor based on immobilized glutathione S-transferase and sol–gel entrapped bromcresol green for the determination of atrazine

The aim of this work was to investigate, for the first time, the potential of the enzyme glutathione S-transferase I (isoenzyme GST-I) for uses in analytical chemistry. A novel fiber-optic biosensor for the detection and determination of the triazine herbicide atrazine was developed based on maize GST-I expressed in E. coli. The sensing bioactive material was a three-layer mini-sandwich. The enzyme was immobilized on the outer layer that consisted of a hydrophilic polyvinylidenefluoride membrane. This membrane was supported on an inner glass disk by means of an intermediate binder sol–gel layer that incorporated bromcresol green (BCG). The biosensor operated in a static mode at 25 °C and the rate of the enzymatic reaction, using atrazine as a substrate, served as an analytical signal. A calibration curve was obtained for atrazine, with analytically useful concentration range 2.52–125 μM. The sensor detection limit was 0.84 μM. The reproducibility of atrazine sensing was in the order of ±3–5%. The method was successfully applied to the determination of this herbicide in real water samples, without sample preparation steps. Atrazine recovery ranged between 85 and 110%. No interference from other pesticides, such as alachlor and carbaryl was observed in the absence of atrazine. The immobilized enzyme retained about 75% of its original activity after 1 month use. Simply unscrewing the terminal holding ring of the probe and placing a new bioactive sandwich could easily replace a deteriorated mini-sandwich.     

氧化钨薄膜微型电化学器件的研究

本文论述了WO_3薄膜氢离子敏器件的结构、原理、制备技术和测试分析。利用WO_3薄膜在H+溶液中由绝缘转化为导电特性,成功地研制成氢离子敏器件。这是一种简易而经济的微型pH敏器件技术。     

Dynamic optimization problems with bounded terminal conditions

Bounded terminal conditions of nonlinear optimization problems are converted to equality terminal conditions via the Valentine's device. In so doing, additional unknown parameters are introduced into the problem. The transformed problems can still be easily solved using the sequential gradient-restoration algorithm (SGRA) via a simple augmentation of the unknown parameter vector . Three example problems with bounded terminal conditions are solved to verify this technique.This research was supported in part by the National Aeronautics and Space Administration under NASA Grant No. NCC 2-106.     

Two-photon absorption in quadrupolar pi-conjugated molecules: influence of the nature of the conjugated bridge and the donor-acceptor separation

Quadrupolar-type substitution of pi-conjugated chromophores with donor and acceptor groups has been shown to increase their two-photon absorption (TPA) response by up to two orders of magnitude. Here, we apply highly correlated quantum-chemical calculations to evaluate the impact of the nature of conjugated bridge and the charge-transfer distance on that enhancement. We compare chromophores with phenylenevinylene-, thienylenevinylene-, polyene-, and indenofluorene-type backbones substituted by dimethylamino and cyano groups. In all compounds, we find a strongly TPA-active A(g) state (either 2A(g) or 3A(g)) in the low-energy region, as well as a higher lying TPA-active state (mA(g)) at close to twice the energy of the lowest lying one-photon allowed state; the smaller energy detuning in the mA(g) states results in very large TPA cross sections delta. We also investigate the influence of the degree of ground-state polarization on TPA. Independent of the nature of the backbone and the donor-acceptor separation, delta displays the same qualitative evolution with a maximum before the cyanine-like limit; the highest TPA cross sections are calculated for distirylbenzene- and polyene-based systems.