EFFECT OF HEAD SHAPE ON THE ADHESION CAPABILITY OF MUSHROOM-LIKE BIOLOGICAL ADHESIVE STRUCTURES

Theoretical studies have been extensively performed to reveal the mechanism of the biological adhesive structure with a flat head.However,most biological adhesive structures have a big head.Here we investigate the effect of the head shape on the adhesion capability of a mushroomlike adhesion structure based on a finite element model.We show that a mushroom-like head produces significant adhesion enhancement.We investigate also the effect of the elastic modulus of the adhesive structure on the adhesion.Our results are consistent with existing experimental results.     

Effect of low-temperature processing on dry film photoresist properties for flexible electronics

This study presents the mechanical characterization of the dry film photoresist PerMX and its adhesion properties when laminated onto Kapton® E (PI) and Melinex® ST506 (PET). Additionally, the processing temperature, the adhesion strength, and the neutral plane position are investigated and optimized. A relatively low-temperature (85 °C) process is developed to protect the integrity of the polymers with low glass transition temperature and reduce the thermal mismatch stress. Reduction in processing temperature led to a decrement in the adhesion strength. To counteract this unwanted effect, surface treatments (oxygen plasma) are performed on the polymer surface before lamination. Using the latter techniques, adhesion of PerMX to PET (hard bake: 1 h at 85 °C) is increased from 0.07 to 0.26 N mm⁻¹ (variation of 270%). Finally, the mechanical robustness is investigated and increased by tuning the position of the neutral plane, after 50,000 bending cycles and a radius of curvature of 2.5 mm. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Multiple solutions for a class of biharmonic equations with a nonlinearity concave at the origin

In this paper, we investigate the existence of multiple solutions for a class of biharmonic equations where the nonlinearity involves a concave term at the origin. The solutions are obtained from the versions of mountain pass lemma and linking theorem.     

ELASTIC CALCULATION OF STRESSES IN RINGS USING AIRY STRESS FUNCTION

Stress calculation formulae for a ring have been obtained by using Airy stress function of the plane strain field with the decomposition of the solutions for normal stresses of Airy biharmonic equation into two parts when it is loaded under two opposite inside forces along a diameter. One part should fulfill a constraint condition about normal stress distribution along the circumference at an energy valley to do the minimum work. Other part is a stress residue constant. In order to verify these formulae and the computed results, the computed contour lines of equi-maximal shear stresses were plotted and quite compared with that of photo-elasticity test results. This constraint condition about normal stress distribution along circumference is confirmed by using Greens’ theorem. An additional compression exists along the circumference of the loaded ring, explaining the divorcement and displacement of singularity points at inner and outer boundaries.     

工程测量中光波干涉必须满足的几个条件

讨论了两列光波发生干涉现象的理想化条件和在实验中能否观察到干涉现象发生的操作性条件，推导了各种情况下的理论公式。从工程应用的角度出发，研究了检测仪器的响应时间T和光强分辨能力对观察光的干涉现象的影响，提出了观察光的干涉现象的第四个必要条件，对在各种情况下应用光的干涉现象有一定的指导作用。     

A study on odd-parity high-lying states of the Sm atom with three-color resonant excitation

The odd-parity high-lying states of the Sm atom are investigated systematically by a three-color resonant excitation scheme with two different excitation paths.The two intermediate states,4f 6 6s7s 7 F 0 and 4f 6 6s7s 7 F 1 are employed for paths I and II,respectively.Fifty-seven bound states are detected with paths I and II in the energy range between 44188 and 45515 cm 1,while 64 autoionizing states are found in the energy range from 45528 to 45761 cm 1.Not only the level energies of all observed states,b...     

单重态H_2N=B:→HNBH重排反应的理论研究

用量子化学中的从头算方法, 在MP2/6-311++G(d,p)水平上研究了单重态H_2N=B→HNBH重排反应的机理。结果表明, 该重排反应经过一个三元环过渡态。根据计算结果，初步讨论了该反应的热力学及动力学函数。     

Interplay between bulk viscoelasticity and surface energy in autohesive tack of rubber‐tackifier blends

The effects of change in surface energy and bulk viscoelastic properties on the autohesive tack strength of brominated isobutylene‐co‐p‐methylstyrene (BIMS) rubber have been investigated by the addition of hydrocarbon resin (HCR) tackifier and maleated hydrocarbon resin (MA‐g‐HCR) tackifier. The addition of compatible HCR tackifier results in a reasonable increment in the tack strength of BIMS rubber by modifying only the bulk viscoelastic properties (compliance, entanglement molecular weight, relaxation time, self‐diffusion, and monomer friction coefficient values) of BIMS rubber to perform better during the course of bonding and debonding steps of the peel test. Incorporation of MA‐g‐HCR tackifier (containing 5–20 wt % of grafted maleic anhydride) steadily increases the tack strength of BIMS rubber further by precisely modifying both the surface energy and bulk viscoelastic properties to perform much better in the bonding and debonding steps. However, beyond 20 wt % of grafted maleic anhydride in the HCR tackifier, the tack strength starts decreasing due to the incompatibility between the blend components, and hence, the bulk viscoelastic properties required for bond formation are severely retarded by the interrelated reinforcing effect and the phase separation effect of the brittle MA‐g‐HCR tackifier in the BIMS rubber. Hence, the polar groups in a tackifier will contribute to significant enhancement of autohesive tack strength only if the bulk viscoelastic property of the rubber‐tackifier blend is favorable for bond formation and bond separation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 972–982, 2010     

三硼酸锂晶体的多光子散射

本文报道三硼酸锂(LBO)晶体的瞬态前向相干多光子散射,实验表明LBO晶体内部同时发生x~(2)和x~(3)非线性相互作用过程,而未发现光耦合效应,测量了LBO晶体的光栅寿命上限.     

Laser resonator with balanced thermal lenses

An adaptive negative thermal lens that compensates for the power-dependent positive thermal lens in a transversally diode-pumped Nd:YAG laser rod is presented. We demonstrate that the proposed technique leads to a reduction of the total thermal lens by more than an order of magnitude.