基于PIII技术的高真空洁净环境中润滑问题

针对高洁净的真空环境下终端光学组件内运动机构的润滑问题,采用等离子体浸没离子注入（PIII）技术对复杂形状的零件进行表面改性,通过轴承内外圈表面改性前后的对比实验分析,结果表明,通过对注入元素、剂量和能量的选择,可以大幅度提高材料表面的硬度及耐磨性,并且零件的尺寸精度及表面粗糙度保持性好,充分证明了PIII技术可以在满足颗粒洁净度和有机物洁净度的双重要求条件下,提高运动部件抗摩擦磨损性能,延长微驱动机构的运动精度寿命,是解决终端光学组件中润滑问题的有效途径。     

水浸超声检测的平面波频域快速成像算法

给出了一种基于一步相移法的水浸超声检测快速频域算法,以适用于液浸式相控阵成像。通过在阵列信号频域乘以相移因子,将阵列虚拟延拓至水浸工件表面,再进行单介质频域成像。相比时域延时叠加算法,节省了计算界面折射点的用时。对于垂直入射平面波检测,提出一种网格匹配的方法,通过调整傅里叶变换的点数,使阵列信号频域和图像频域的采样网格相重合,有效地减少了频域插值误差和伪像,进一步降低了运算次数.实验结果表明,网格匹配频域算法的运算次数仅为时域平面波算法的1/60,为水浸式超声实时检测提供了一种可行方案。     

Mechanisms for surface energy changes observed in plasma immersion ion implanted polyethylene: The roles of free radicals and oxygen-containing groups

Low density polyethylene (LDPE) was modified by plasma immersion ion implantation (PIII) with nitrogen ions of 20 keV. Surface energy and structural transformations were observed during storage of the modified LDPE in air after PIII, by wettability measurements and FTIR-ATR spectra respectively. The appearance of oxygen-containing groups has some kinetic stages with characteristic times from hours to days. The surface energy values attained and comparison with the kinetics of oxidation reveal that the initial changes in the surface energy of LDPE are caused mainly by free radicals and to a lesser extent by oxygen-containing groups. The final surface energies observed after the process known as hydrophobic recovery and the surface energies stabilize are attributable to oxygen-containing groups. The modified surface is “living” and an investigation of the wettability, surface energy, unsaturated and oxygen-containing groups in the surface layer of ion beam modified polymers is incomplete if the kinetics of structural transformations after modification is not taken into account.     

Surface‐sensitive Raman microscopy with total internal reflection illumination

A Raman microscope using a total internal reflection (TIR) annular illumination geometry through a ZnSe solid immersion lens (SIL) is described. Spectra of a thin‐film sample of the transparent organic conductor poly(3,4‐ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) on a polyethylene terephthalate (PET) substrate are presented and compared with those from a conventional confocal Raman configuration. These spectra demonstrate a significant increase in surface selectivity upon the use of TIR illumination, as the decay length of the evanescent excitation field limits the depth of sample probed in this configuration. Spectral interference from the underlying PET substrate layer is thus greatly reduced. An increase in surface selectivity is also demonstrated for spectra acquired through the SIL with uniform illumination. Raman images of a micropatterned PEDOT:PSS film acquired with TIR illumination are also reported. Enhanced lateral resolution is realized in this configuration because of the immersion effect of the SIL, and the sampling depth is limited to 150 nm by the choice of illumination geometry. This results in analysis volumes on the order of tens of femtoliters, nearly two orders of magnitude smaller than typically achieved in conventional confocal Raman microscopes. This approach yields Raman spectra and images with surface selectivity significantly greater than can be achieved in confocal Raman, and provides a valuable tool for the microanalysis of thin surface films. Published in 2010 by John Wiley & Sons, Ltd.     

Total lightcone curvatures of spacelike submanifolds in Lorentz–Minkowski space

We introduce the totally absolute lightcone curvature for a spacelike submanifold with general codimension and investigate global properties of this curvature. One of the consequences is that the Chern–Lashof type inequality holds. Then the notion of lightlike tightness is naturally induced.     

Self-Assembling Process of Colloidal Particles into Two-Dimensional Arrays Induced by Capillary Immersion Force: A Simulation Study With Discrete Element Method

This paper presents a simulation study for self-assembling process of colloidal particles into two-dimensional arrays due to capillary immersion force. Discrete element method is used to simulate the dynamics of colloidal particles trapped in a thin liquid film. The previous model is improved in the following two points: a modification of the screening effect of capillary immersion force and introduction of periodic boundary condition. Snapshots provided by the simulations agree well with experimental images taken by atomic force microscopy. The self-assembling process is quantified with pair correlation function and coordination number. At lower coverage, colloidal particles rapidly form small clusters that consist of several particles in the early stage. Subsequently, chain-like structures with some branches are mainly generated. On the other hand, at higher coverage, large domains of hexagonal close-packed (HCP) structures are gradually generated. The rate of the growth of HCP domains is much slower than that of the generation of the small clusters and the chain-like structures.     

Formation of diamond-like carbon (DLC) film on the NiTi alloys via plasma immersion ion implantation and deposition (PIIID) for improving corrosion resistance

NiTi alloys are potentially useful in biomedical application due to their unique superelasticity and shape memory effect. However, the materials are vulnerable to surface corrosion and the most serious issue is out-diffusion of toxic Ni ions from the substrate into body tissues and fluids. In this paper, Diamond-like carbon (DLC) film is fabricated on the NiTi alloys using plasma immersion ion implantation and deposition (PIIID) at room temperature to improve their corrosion resistance and block the out-diffusion of the Ni ions. The results show that the DLC films cannot only improve the corrosion resistance of the NiTi substrate, but also effectively suppress the Ni ions release from the substrate. The reason that the corrosion resistance of the coated samples is markedly improved due to the DLC films formation is systematically investigated.     

紧黎曼对称空间到Grassmann流形的等变等距极小浸入

在本文中，我们利用李群及其表示理论作为主要工具，　讨论了紧黎曼对称空间到Ｇｒａｓｓｍａｎｎ　流形的等变等距极小浸入问题．     

常平均曲率子流形

设M是等距浸入在常曲率黎曼流形S^n p(C)的n维紧致黎曼流形，若M^n是极小的,有著名的Simons不等式和丘成桐不等式。本文推广它们到常曲率黎曼流形的平行平均曲率的子流形的情形。     

On holomorphic immersions into Khler manifolds of constant holomorphic sectional curvature

We study holomorphic immersions f:X→M from a complex manifold X into a Kahler manifold of constant holomorphic sectional curvature M, i.e. a complex hyperbolic space form, a complex Euclidean space form, or the complex projective space equipped with the Fubini-Study metric. For X compact we show that the tangent sequence splits holomorphically if and only if f is a totally geodesic immersion. For X not necessarily compact we relate an intrinsic cohomological invariant p(X) on X, viz. the invariant defined by Gunning measuring the obstruction to the existence of holomorphic projective connections, to an extrinsic cohomological invariant v(f) measuring the obstruction to the holomorphic splitting of the tangent sequence. The two invariants p(X) and v(f) are related by a linear map on cohomology groups induced by the second fundamental form. In some cases, especially when X is a complex surface and M is of complex dimension 4, under the assumption that X admits a holomorphic projective connection we obtain