Highly sensitive bend sensor with hybrid long-period and tilted fiber Bragg grating

We demonstrate a new type of fiber optic bend sensor with a hybrid structure made up of a long period grating (LPG) and a tilted fiber Bragg grating (TFBG). The sensing mechanism is based on the spectrum of power transfers between the core and cladding modes from a TFBG located downstream from a LPG. We show that the curvature of a beam can be determined by the reflected power difference between the core mode and the recoupled cladding modes. We further provide design rules for the LPG and TFBG to optimize and linearize the sensor response. In addition, the temperature cross-sensitivities of this configuration are also investigated for two different types of fiber.     

Modern information technologies in construction of kinetic models for reactions of metal complex catalysis

For detailed study of complex chemical reactions mechanisms experiment is conducted for selected private reactions. This causes a problem of kinetic parameters getting—the same set of rate constants must describe both public and private reaction stages, and also a general mechanism. In this paper, solution of this problem for a reaction of olefins hydroalumination is proposed. To optimize the computational process a methodology of parallelization is elaborated. On the base of parallel computations, a kinetic model for the reaction assigned is constructed, and on its base, the physical and chemical conclusions about reaction mechanism are done.     

Optimization of Vacuum-Microwave-Assisted Extraction of Natural Polyphenols and Flavonoids from Raw Solid Waste of the Orange Juice Producing Industry at Industrial Scale

Orange pomace (OP) is a solid waste produced in bulk as a byproduct of the orange juice industry and accounts for approximately 50% of the quantity of the fruits processed into juice. In numerous literature references there is information about diverse uses of orange pomace for the production of high-added-value products including production of natural antioxidant and antimicrobial extracts rich in polyphenols and flavonoids which can substitute the hazardous chemical antioxidants/antimicrobials used in agro-food and cosmetics sectors. In this work and for the first time, according to our knowledge, the eco-friendly aqueous vacuum microwave assisted extraction of orange pomace was investigated and optimized at real industrial scale in order to produce aqueous antioxidant/antimicrobial extracts. A Response Surface Optimization methodology with a multipoint historical data experimental design was employed to obtain the optimal values of the process parameters in order to achieve the maximum rates of extraction of OP total polyphenols and/or total flavonoids for economically optimum production at industrial scale. The three factors used for the optimization were: (a) microwave power (b) water to raw pomace ratio and (c) extraction time. Moreover, the effectiveness and statistical soundness of the derived cubic polynomial predictive models were verified by ANOVA.     

回归知识本原 构建生命课堂——以“常见物质的检验”为例

以“常见物质的检验”的教学为例,运用化学史料帮助学生自主建构知识体系,促进学生追寻知识本原,实现思维进阶,发展核心素养,并阐述运用化学史料构建高中化学生命课堂的实施策略。     

Ultrasound-assisted crystallization (sonocrystallization)

The positive influence of ultrasound (US) on crystallization processes is shown by the dramatic reduction of the induction period, supersaturation conditions and metastable zone width. Manipulation of this influence can be achieved by changing US-related variables such as frequency, intensity, power and even geometrical characteristics of the ultrasonic device (e.g. horn type size). The volume of the sonicated solution and irradiation time are also variables to be optimized in a case-by-case basis as the mechanisms of US action on crystallization remain to be established. Nevertheless, the results obtained so far make foreseeable that crystal size distribution, and even crystal shape, can be ‘tailored’ by appropriate selection of the sonication conditions.     

果树种植最佳土地租赁期的数学模型建构

以种植果树为例,根据果树种植的客观规律,引进折扣因子δ=U-α,给出了通过确定投资合同期使利润达到最大的数学模型,并进行了讨论和推广.     

红外光谱技术对广东博罗横岭山商周时期墓地出土古玉器上蜡工艺的揭示及其意义

广东博罗横岭山商周时期墓地是广东省目前所发现的最重要的商周时期墓葬群,该墓地出土的玉器样品通过一系列的科学鉴定研究后发现,玉器的红外光谱在2 960 cm-1(相对较弱)、2 920和2 853 cm-1附近出现了2～3个明显的特征性吸收峰,结合对纯蜡样品、现代上蜡玉器样品的测试比较,认为博罗横岭山墓地出土玉器在加工过程中曾经经过上蜡处理,首次揭示出商周时期岭南先民掌握了在加工中利用蜡来增加玉器美观技术的事实。     

基于氧化石墨烯的长周期光纤光栅的全光控制

实验验证了一种通过将氧化石墨烯分散液沉积在长周期光纤光栅的全光控制的相关研究。通过外加的垂直泵浦光的作用,氧化石墨烯吸收泵浦光产生热量,改变长周期光纤光栅的包层模式的相位差,由于热膨胀的作用改变了氧化石墨烯所覆盖部分的光栅周期,使得谐振谱发生了移动,其最大调制深度可达10.6 dB,谐振谱最大可红移12.8 nm。通过实验发现,沉积相同浓度氧化石墨烯分散液的次数影响实验结果,通过在相同光栅的相同位置分别沉积三次,发现沉积三次可以在光纤表面获得更加均匀的氧化石墨烯膜,进行了时间响应的测试,其中沉积三次后的长周期光纤光栅的响应速度可达0.61 ms,沉积多次氧化石墨烯分散液可以在光纤表面沉积得更加平整均匀,从而获得更大的导热性能。     

CROSS-LINKING OF AROMATIC POLY（THIOETHER）S

A novel cross-linking process using two high molecular weight aromatic poly(thioether)s,which were synthesized by the reactions of 4,4′-thiobisbenzenethiol with 4,4′-difluorobenzophenone and 4,4′-difluorodiphenylsulfone,respectively, and commercially available lower molecular weight poly(p-phenylene sulfide)was investigated.These reactions were carried out in bulk by the addition of silver tetrafluroborate andα,α′-dibromo-p-xylene at 190℃over a period of 45 min. Furthermore,the same procedure could be modified to cross-link compression-molded films of these three polymers.The thermal and solubility behaviors of these polymers before and after cross-linking reactions,are presented.     

Detection of water in jet fuel using layer-by-layer thin film coated long period grating sensor

The quantitative measurement of jet fuel additives in the field is of interest to the Air Force. The “smart nozzle” project was designed as a state-of-the-art diagnostics package attached to a single-point refueling nozzle for assessing key fuel properties as the fuel is dispensed. The objective of the work was to show proof of concept that a layer-by-layer thin film and long period grating fibers could be used to detect the presence of water in jet fuel. The data for the nafion/PDMA film and a long period grating fiber is a combination capable of quantitative measurement of water in kerosene. The average response (spectral loss wavelength shift) to the kerosene sample ranged from −6.0 for 15 ppm to −126.5 for 60 ppm water. The average calculated value for the check standard was 21.71 and ranged from 21.25 to 22.00 with a true value of 22.5 ppm water. Potential interferences were observed and are judged to be insignificant in real samples.