Preparation of lucifer yellow fluorescent liposomes: A method for cells' membrane labeling

This report describes a method to conjugate lucifer yellow to the external surface of liposomes. The heterobifunctional cross-linking reagentN-succinimidyl 3-(2-pyridyldithio)propionate has been used to activate DMPE molecules. The DMPE-dithiopyridine product has been mixed with DMPC to prepare liposome vesicles. These have been reduced by DTT and finally reacted with lucifer yellow-iodoacetamide to produce the fluorescence-labeled vesicles. The quenching of their fluorescence intensity by Kl is consistent with fully exposed fluorophores. The decay of the fluorescence intensity of the lipid-bound lucifer yellow is biexponential (₁=7.9 ns; ₂=1.1 ns), with a relative yield of 0.16. When the fluorescent liposomes are mixed with cells, the lucifer yellow-DMPE derivative is transferred. Boar spermatozoa and peripheral human blood lymphocytes have been used as cellular models. The extent of incorporation is dependent on the incubation time and temperature. At 36°C, lucifer yellow fluorescence appears in the spermatozoa cells after 10 min of incubation and reaches its maximum at about 60 min. The fluorescent phospholipid derivative seems to incorporate specifically into membrane structures. The highest labeling ratio is observed with integer, scarcely motile, spermatozoa. A poorer labeling yield (15%) is found with lymphocytes. Interestingly, photobleaching due to epiillumination of the labeled cells is apparently negligible and cells are clearly visible after irradiation times ranging from several minutes to few hours.A preliminary account of this work was presented at the Quarto Simposio su Biotecnologie Biochimiche, Capri, 28–30 June 1992.     

On the interpretation of fluorescence anisotropy decays from probe molecules in lipid vesicle systems

Measurements of fluorescence depolarization decays are widely used to obtain information about the molecular order and rotational dynamics of fluorescent probe molecules in membrane systems. This information is obtained by least-squares fits of the experimental data to the predictions of physical models for motion. Here we present a critical review of the ways and means of the data analysis and address the question how and why totally different models such as Brownian rotational diffusion and wobble-in-cone provide such convincing fits to the fluorescence anistropy decay curves. We show that while these models are useful for investigating the general trends in the behavior of the probe molecules, they fail to describe the underlying motional processes. We propose to remedy this situation with a model in which the probe molecules undergo fast, though restricted local motions within a slowly rotating cage in the lipid bilayer structure. The cage may be envisaged as a free volume cavity between the lipid molecules, so that its position and orientation change with the internal conformational motions of the lipid chains. This approach may be considered to be a synthesis of the wobble-in-cone and Brownian rotational diffusion models. Importantly, this compound motion model appears to provide a consistent picture of fluorescent probe behavior in both oriented lipid bilayers and lipid vesicle systems.     

Use of NIRS technology with a remote reflectance fibre-optic probe for predicting major components in bee pollen

In the present work, we study the use of near infra-red spectroscopy (NIRS) technology together with a remote reflectance fibre-optic probe for determination of the major components in bee pollen. The method allows immediate control of the bee pollen without prior sample treatment or destruction through direct application of the fibre-optic probe to the sample.The regression method employed was modified partial least squares (MPLS). The calibration results obtained using 45 samples of bee pollen allowed the measurement of protein, moisture, ash, reducing sugars, and pH with multiple correlation coefficients (RSQ) and prediction corrected standard errors (SEPC) of 0.91, 0.56% for protein, of 0.78 and 0.49% for moisture; 0.92 and 0.049% for ash; 0.81 and 1.32 g of glucose/100 g of bee pollen; 0.84 and 0.15 for pH, respectively.The prediction capacity of the pattern was checked by applying it to samples of unknown pollen in external validation.     

Evaluation of recombinant green fluorescent protein, under various culture conditions and purification with HiTrap hydrophobic interaction chromatography resins

To determine the influence of various culture conditions, transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were grown in nine cultures with four variable conditions (storage of inoculated broth at 4°C prior to incubation, agitation speed, isopropyl-β-d-thiogalactopyranoside [IPTG] concentration, and induction time). The pelleted cells were resuspended in extraction buffer and subjected to the three-phase partitioning (TPP) extraction method. To determine the most appropriate purification resin, protein extracts were eluted through one of four types of HiTrap hydrophobic interaction chromatography (HIC) columns prepacked with methyl, butyl, octyl, or phenyl resins and analyzed further on a 12% sodium dodecylsulfatepolyacrylamidegel. With Coomassie staining, a single band between 27 (standard GFPuv) and 29 kDa (molecular weight standard) was visualized for every HIC column sample. TPP extraction with HIC elution provided about 90% of the GFPuv recovered and eight-fold GFPuv enrichment related to the specific mass. Rotary speed and IPTG concentration showed, respectively, greater negative and positive influences on GFPuv expression at the beginning of the logarithmic phase for the set culture conditions (37°C, 24-h incubation).     

An affinity-based probe for the proteomic profiling of aspartic proteases

We have developed an affinity-based probe for the proteomic profiling of aspartic proteases. Our probe was shown to be selective towards aspartic proteases over other proteins. It was also shown that the strategy may be used to label selectively aspartic proteases in the presence of a large excess of other proteins, thus making it useful for future proteome profiling experiments.     

New In-situ Sampling and Analysis of the Production of CeO<Subscript>2</Subscript> Powders from Liquid Precursors using a Novel Wet Collection System in a rf Inductively Coupled Thermal Plasma Reactor. Part 1: Reactor System and Sampling Probe

A new reactor and a novel in-situ sampling technique were developed for the study of the synthesis of CeO₂ powders produced from dissolved cerium nitrate salts. The conical reactor minimized particle recirculation and provided a highly symmetrical and undisturbed plasma flow suitable for the analysis of the phenomena affecting the formation of CeO₂ powders. Both a calorimetric study of the reactor and a thermodynamic analysis of CeO₂ formation were conducted. The sampling probe is described and near-isokinetic sampling was achieved. The sampled particles were collected using a miniature wet collection system, i.e. a mist atomizer and a custom-made spray chamber. A numerical simulation of the velocity and temperature fields of the plasma gas in the reactor was done using Fluent. A comprehensive droplet-to-particle formation mechanism presented elsewhere is revisited and expanded based on calorimetry, thermodynamics of CeO₂ formation, numerical simulations and collected particles. No traces of other oxidation states other than CeO₂ were found.     

Mitochondria-targeted ratiometric fluorescent probes for micropolarity and microviscosity and their applications

Two fluorescent "off-on" probes YYH1 and YYH2 were used for bioimaging mitochondrial polarity and viscosity.     

一种基于形成杂多核络合物的荧光增敏效应的研究 Ⅲ.锰(Ⅱ)、钴(Ⅱ)的混合荧光增敏及其连续测定

本文研究了Mn~(2+)和Co~(2+)对7-(8-羟基-3,6-二磺基萘偶氮)-8-羟基喹啉-5-磺酸-硼砂反应体系的混合荧光增敏作用。实验条件下,荧光增敏强度满足线性加和关系的范围是:Mn~(2+)浓度0～2.9×10~(-7)mol/L;Co~(2+)浓度0～8.8×10~(-7)mol/L;总浓度不超过1.0×10~(-6)mol/L。检出限量为Mn~(2+)4.5×10~(-9)mol/L和Co~(2+)1.4×10~(-8)mol/L。实现了Mn~(2+)和Co~(2+)的连续测定。     

Characterization of individual atmospheric particles by element mapping in electron probe microanalysis

In this paper procedures for the characterization of individual aerosol particles by element mapping in the electron microprobe are presented. The number, size and qualitative chemical composition of particles is derived from a combination of secondary or backscattered electron images and element distribution maps. Accuracy of the size distribution and reliability of the qualitative analysis procedure were checked with silicate samples. In order to obtain a semi-quantitative estimate of the chemical composition of individual particles the count rates taken from element distribution maps are corrected for matrix and geometric effects using particle ZAF procedures.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Signaling molecularly imprinted polymers: molecular recognition-based sensing materials

Molecular imprinting is a template polymerization technique that can easily provide synthetic polymers capable of molecular recognition for given target molecules. In addition to their highly specific recognition ability, we are attempting to introduce signaling functions to molecularly imprinted polymers, enabling them to respond according to specific binding events. Some of our work regarding such signaling molecularly imprinted polymers is presented here, including molecularly imprinted polymers that induce spectral shifts of target compounds because of binding. Such compounds include hydrogen-bonding-based fluorescent imprinted polymers and metalloporphyrin-based signaling molecularly imprinted polymers.