Syntheses and Crystal Structures of Two One-dimensional Cobalt(Ⅱ) Compounds with the Flexible Dipyridyl Ligan

Two one-dimensional cobalt(Ⅱ) compounds {[Co(Hbpma)(H2O)4 ] 2 ·3SO 4 ·4.5H2O} n1 and {[Co(Hbpma)(NCS) 3 (H2O)]·2.85H2O}n2 (bpma = N,N -bis(3-pyridylmethyl)amine) have been synthesized and structurally characterized by single-crystal X-ray diffraction. Complex 1 crystallizes in triclinic, space group P1 with a = 15.8780(5), b = 16.2187(5), c = 16.4858(5) , α = 91.0420(10), β = 94.5190(10), γ = 101.4360(10)°, V = 4145.7(2) 3 , C 24 H 53 Co 2 N 6 O 24.50 S 3 , M r = 1031.76, Z = 4, D c = 1.653 g/cm 3 , μ(MoKα) = 1.046 mm -1 , F(000) = 2148, S = 1.017, the final R = 0.0269 and wR = 0.0644 for 13032 observed reflections (I > 2σ(I)). For complex 2, it belongs to triclinic, space group P1 with a = 9.3761(11), b = 10.5814(13), c = 11.2972(14) , α = 85.472(2), β = 88.058(2), γ = 76.203(2)°, V = 1085.0(2) 3 , C 15 H 21.70 CoN 6 O 3.85 S 3 , M r = 502.79, Z = 2, D c = 1.539 g/cm 3 , μ(MoKα) = 1.112 mm -1 , F(000) = 519, S = 1.070, the final R = 0.0358 and wR = 0.0899 for 3466 observed reflections (I > 2σ(I)). Two complexes 1 and 2 are both found to be one-dimensional coordination polymers bridged by the protonated bpma ligands, which are assembled into three-dimensional supramolecular structures through the hydrogen bonding interactions and π-π packing interactions.     

Membrane-based microchannel device for continuous quantitative extraction of dissolved free sulfide from water and from oil

Underground fluids are important natural sources of drinking water, geothermal energy, and oil-based fuels. To facilitate the surveying of such underground fluids, a novel microchannel extraction device was investigated for in-line continuous analysis and flow injection analysis of sulfide levels in water and in oil. Of the four designs investigated, the honeycomb-patterned microchannel extraction (HMCE) device was found to offer the most effective liquid–liquid extraction. In the HMCE device, a thin silicone membrane was sandwiched between two polydimethylsiloxane plates in which honeycomb-patterned microchannels had been fabricated. The identical patterns on the two plates were accurately aligned. The extracted sulfide was detected by quenching monitoring of fluorescein mercuric acetate (FMA). The sulfide extraction efficiencies from water and oil samples of the HMCE device and of three other designs (two annular and one rectangular channel) were examined theoretically and experimentally. The best performance was obtained with the HMCE device because of its thin sample layer (small diffusion distance) and large interface area. Quantitative extraction from both water and oil could be obtained using the HMCE device. The estimated limit of detection for continuous monitoring was 0.05 μM, and sulfide concentrations in the range of 0.15–10 μM could be determined when the acceptor was 5 μM FMA alkaline solution. The method was applied to natural water analysis using flow injection mode, and the data agreed with those obtained using headspace gas chromatography-flame photometric detection. The analysis of hydrogen sulfide levels in prepared oil samples was also performed. The proposed device is expected to be used for real time survey of oil wells and groundwater wells.     

Green solvent approach for printable large deformation thermoplastic elastomer based piezoresistive sensors and their suitability for biomedical applications

Composites based on biocompatible thermoplastic elastomer styrene‐ethylene/butylene‐styrene (SEBS) as matrix and multi‐walled carbon nanotubes (MWCNT) as nanofillers show excellent mechanical and piezoresistive properties from low to large deformations. The MWCNT/SEBS composites have been prepared following a green solvent approach, to extend their range of applicability to biomedical applications. The obtained composites with 2, 4, and 5 wt % MWCNT content provide suitable piezoresistive response up to 80% deformation with a piezoresistive sensibility near 2.7, depending on the applied strain and MWCNT content. Composite sensors were also developed by spray and screen printing and integrated with an electronic data acquisition system with RF communication. The possibility to accurately control the composites properties and performance by varying MWCNT content, viscosity, and mechanical properties of the polymer matrix, shows the large potential of the system for the development of large deformation printable piezoresistive sensors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2092–2103     

碳纳米管制备蓝光石墨烯量子点及其在柔性有机存储器上的应用

通过化学裁剪法打开碳纳米管获得了粒径一致、性能稳定、具有蓝色荧光的石墨烯量子点。该方法属于化学溶液法，具有成本低廉、工艺简单、条件易控等优势。将该样品与半导体聚合物按一定比例混溶，通过旋涂技术形成基于石墨烯量子点掺杂的聚合物复合薄膜，进而制成柔性存储器。该柔性可弯曲存储器具有低驱动电压、接近10³的ON/OFF 比率、较好的循环次数，较好的重复性和稳定性。该研究结果为柔性有机存储器领域的研究展开了新的方向。     

实船撞击实验防撞装置的撞击力分析

实验研究了基于以钢丝绳为基本元件的新型柔性防撞装置的防护性能.利用DEWETRON数据采集仪及多通道同步采集传感器的信号,分析得到防撞装置在碰撞中受到的撞击力曲线.实验结果显示:靠近船舶撞击侧最近的非撞击侧位置受到的撞击力最大,属防护重点部位;在承受多次撞击后,防撞装置基本完好,且船舶在碰撞中的损伤也有所减低.     

NARROW BANDWIDTH BRIGHT SCARLET ORGANIC ELECTROLUMINESCENT DEVICE BASED ON N,N'-BIS[4-(N,N-DIMETHYLAMONO)-BENZYLIDENE]-DIAMINOMALEONITRILE DYE

A novel red dye, N, N'-bis[4-(N,N-dimethylamino)-benzylidene]diaminomaleonitrile (BAM), was prepared by reacting diaminomaleonitrile with 4-(N,N-dimethylamino)-benzaldehyde and were characterized by ¹H NMR, UV absorption and photoluminescence. The BAM dye showed an absorption peak wavelength of 530 nm and bright photoluminescence with a peak wavelength at 675 nm. It was used as the doped emitter for fabricating a bright scarlet organic electroluminescent (EL) device. The structure of the double-layer EL device consisted of a hole-transport layer and a luminescent layer between ITO glass and magnesium electrodes. The hole-transport layer was a poly(N-vinylcarbazole) (PVK) film. The luminescent layer consisted of a host material, 8-hydroxyquinoline aluminum (Alq₃), and BAM dye as the dopant. A bright light with the peak of 620 nm and narrow bandwidth of 50 nm was obtained in the device with a maximum luminance of 6230 cd/m². The emission spectra almost unchanged as the luminance increased with increasing injection current and the bias voltage. A tentative explanation from both the electronic distribution viewpoint and the molecular geometric analysis for the narrow bandwidth of this red dye was offered.     

Flexible Polyester Cellulose Paper Supercapacitor with a Gel Electrolyte

A low-cost polyester cellulose paper has been used as a substrate for a flexible supercapacitor device that contains aqueous carbon nanotube ink as the electrodes and a polyvinyl alcohol (PVA)-based gel as the electrolyte. Gel electrolytes have attracted much interest due to their solvent-holding capacity and good film-forming capability. The electrodes are characterized for their conductivity and morphology. Because of its high conductivity, the conductive paper is studied in supercapacitor applications as active electrodes and as separators after coating with polyvinylidene fluoride. Carbon nanotubes deposited on porous paper are more accessible to ions in the electrolyte than those on flat substrates, which results in higher power density. A simple fabrication process is achieved and paper supercapacitors are tested for their performance in both aqueous and PVA gel electrolytes by using galvanostatic and cyclic voltammetry methods. A high specific capacitance of 270 F g⁻¹ and an energy density value of 37 W h kg⁻¹ are achieved for devices with PVA gel electrolytes. Furthermore, this device can maintain excellent specific capacitance even under high currents. This is also confirmed by another counter experiment with aqueous sulfuric acid as the electrolyte. The cycle life, one of the most critical parameters in supercapacitor operations, is found to be excellent (6000 cycles) and less than 0.5 % capacitance loss is observed. Moreover, the supercapacitor device is flexible and even after twisting does not show any cracks or evidence of breakage, and shows almost the same specific capacitance of 267 F g⁻¹and energy density of 37 W h kg⁻¹. This work suggests that a paper substrate can be a highly scalable and low-cost solution for high-performance supercapacitors.     

A microfluidic paper-based analytical device for rapid quantification of particulate chromium

Occupational exposure to Cr is concerning because of its myriad of health effects. Assessing chromium exposure is also cost and resource intensive because the analysis typically uses sophisticated instrumental techniques like inductively coupled plasma-mass spectrometry (ICP-MS). Here, we report a novel, simple, inexpensive microfluidic paper-based analytical device (μPAD) for measuring total Cr in airborne particulate matter. In the μPAD, tetravalent cerium (Ce(IV)) was used in a pretreatment zone to oxidize all soluble Cr to Cr(VI). After elution to the detection zone, Cr(VI) reacts with 1,5-diphenylcarbazide (1,5-DPC) forming 1,5-diphenylcarbazone (DPCO) and Cr(III). The resulting Cr(III) forms a distinct purple colored complex with the DPCO. As proof-of-principle, particulate matter (PM) collected on a sample filter was analyzed with the μPAD to quantify the mass of total Cr. A log-linear working range (0.23–3.75 μg; r² = 0.998) between Cr and color intensity was obtained with a detection limit of 0.12 μg. For validation, a certified reference containing multiple competing metals was analyzed. Quantitative agreement was obtained between known Cr levels in the sample and the Cr measured using the μPAD.     

Inducing a high twisted conformation in the polyimide structure by bulky donor moieties for the development of non-volatile memory

Two polyimides, PI(DAT-6FDA) and PI(DAPT-6FDA), from N-(2,4-diaminophenyl)-N,N-diphenylamine (DAT) or N-(4-(2′,4′-diaminophenoxy)phenyl-N,N-diphenylamine (DAPT) and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) were prepared to clarify the structural effect on the resulting memory properties. The memory device based on PI(DAT-6FDA) showed an unstable volatile behavior, while the device based on PI(DAPT-6FDA) with a more bulky donor (D) unit exhibited a stable non-volatile FLASH type memory characteristic with a long retention time over 10⁴ s. The theoretical simulation based on the density functional theory (DFT) suggested that the greater distinct charge separation between the ground and charge transfer (CT) states led to a highly stable memory behavior. Also, it was clarified that PI(DAPT-6FDA) had a highly twisted conformation compared to PI(DAT-6FDA) in the ground state, and a more twisted dihedral angle between the D and acceptor (A) units was induced in the CT state, which led to the non-volatile memory characteristic.     

Multidimensional gas chromatography for the characterization of permanent gases and light hydrocarbons in catalytic cracking process

An integrated gas chromatographic system has been successfully developed and implemented for the measurement of oxygen, nitrogen, carbon monoxide, carbon dioxide and light hydrocarbons in one single analysis. These analytes are frequently encountered in critical industrial petrochemical and chemical processes like catalytic cracking of naphtha or diesel fuel to lighter components used in gasoline. The system employs a practical, effective configuration consisting of two three-port planar microfluidic devices in series with each other, having built-in fluidic gates, and a mid-point pressure source. The use of planar microfluidic devices offers intangible advantages like in-oven switching with no mechanical moving parts, an inert sample flow path, and a leak-free operation even with multiple thermal cycles. In this way, necessary features such as selectivity enhancement, column isolation, column back-flushing, and improved system cleanliness were realized. Porous layer open tubular capillary columns were employed for the separation of hydrocarbons followed by flame ionization detection. After separation has occurred, carbon monoxide and carbon dioxide were converted to methane with the use of a nickel-based methanizer for detection with flame ionization. Flow modulated thermal conductivity detection was employed to measure oxygen and nitrogen. Separation of all the target analytes was achieved in one single analysis of less than 12 min. Reproducibility of retention times for all compounds were found to be less than 0.1% (n = 20). Reproducibility of area counts at two levels, namely 100 ppm_v and 1000 ppm_v over a period of two days were found to be less than 5.5% (n = 20). Oxygen and nitrogen were found to be linear over a range from 20 ppm_v to 10,000 ppm_v with correlation coefficients of at least 0.998 and detection limits of less than 10 ppm_v. Hydrocarbons of interest were found to be linear over a range from 200 ppb_v to 1000 ppm_v with correlation coefficients of greater than 0.999 and detection limits of less than 100 ppb_v.