氮低温制冷循环系统在大科学装置中的应用与发展

大科学装置中低温设备的氮低温冷量需要日益快速增长,为减少能耗和保障装置的长期稳定运行,基于大科学装置氮低温系统运行需求,介绍了氮低温制冷循环系统在国内外大科学装置中的应用情况,总结了目前大科学装置中应用氮低温制冷循环系统的研究现状,并探讨以氮制冷机为核心的氮低温制冷循环系统在未来大科学装置中发展方向。     

基于B3PyMPM∶Cs高效叠层OLED器件的制备

以B 3 PyMPM∶Cs/Al/HAT-CN作为电荷生成单元制备高效叠层绿色磷光有机电致发光器件,叠层器件的最大电流效率和最大流明效率分别为172.2 cd/A和111.0 lm/W,在5 mA/cm^2电流密度下,叠层器件的电压和亮度分别为传统器件的2.04倍和2.84倍.为了探究叠层器件性能优于传统器件的原因,研究了电荷生成单元内的电荷产生和注入过程,以及薄层铝对电子注入特性和电荷生成单元稳定性的影响.实验结果表明,电荷能够有效地在电荷生成单元内产生并顺利注入电子传输层中,B3PyMPM∶Cs和HAT-CN间Al薄层的插入能够进一步提高电子注入效率及器件结构的稳定性.     

8-羟基喹啉两亲配合物的LB膜及其电致发光器件研究

制备了两亲配体N-十六烷基-8-羟基-2-喹啉甲酰胺(HL)十个配合物的LB膜。采用π-A等温线和小角X射线衍射等方法研究了这些LB膜的性质和结构。两亲配合物的单分子占有面积为(1.25±0.06)nm^2和(0.75±0.06)nm^2,分别对应于两亲分子中两个喹啉环平躺和环与环之间以一定的角度倾斜于气/水界面。LB膜内分子排列是二维有序的超晶格结构,双层高度(5.0±0.1)nm;LB膜具有导电各向异性,其平面和垂直直流电导率分别为10^-^5S.m^-^1和10^-^9S.m^-^1;LB膜的高荧光性质使之可以用作为电致发光器件的发光材料。以LaL~2(H~2O)~4Cl的LB膜为发光层的单层电致发光器件的驱动电压为9V,发光亮度330cd/m^2,为黄绿色发光。     

用于超级电容器的层状Co3O4/Ti纳米片柔性电极及其低电荷转移电阻

采用水热合成法,在Ti网上原位生长多孔层状Co_3O_4纳米片,并优化了电荷转移电阻。通过X射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)对产物的结构、形貌进行表征,及对电极的电化学性能进行测试。结果表明,材料是由排列良好的微米矩形二维薄片组成,且具有均匀的孔隙分布。这种独特的微纳米结构的超级电容器电极材料降低了电极的电荷转移电阻,增强了活性物质的结构稳定性,从而提高了电极的电化学性能,在电流密度为100 mA·g-1时,电极循环1 000次后,电容保持率为91.8%,电荷转移电阻(Rct)为0.29Ω。这些显著的超电容性能归因于合理的二维层状结构在柔性基底钛网上的生长及柔性Co_3O_4/Ti电极活性材料的高利用率。     

Three new ZnII coordination polymers constructed from a semi‐rigid tricarboxylic acid: structural changes caused by flexibility and luminescence sensing for hexavalent chromate anions

Coordination polymers (CPs) with specific structures and functional luminescence have been widely designed as sensors for detecting small molecules and ions. In this study, with or without the help of an N‐donor auxiliary linker, three new Zn^II CPs, namely, three‐dimensional (3D) poly[[pentaaquabis[μ₃‐5‐(4‐carboxybenzyloxy)isophthalato]bis[μ₆‐5‐(4‐carboxylatobenzyloxy)isophthalato]di‐μ₃‐hydroxido‐hexazinc(II)] trihydrate], {[Zn₆(C₁₆H₁₀O₇)₂(C₁₆H₉O₇)₂(OH)₂(H₂O)₅]·3H₂O}_n or {[Zn₆(μ₃‐HL)₂(μ₆‐L)₂(μ₃‐OH)₂(H₂O)₅]·3H₂O}_n, ( I ), one‐dimensional (1D) catena‐poly[[[aqua(1,10‐phenanthroline)zinc(II)]‐μ₂‐5‐(4‐carboxybenzyloxy)isophthalato] dihydrate], {[Zn(C₁₆H₁₀O₇)(C₁₂H₈N₂)(H₂O)]·2H₂O}_n or {[Zn(μ₂‐HL)(phen)(H₂O)]·2H₂O}_n (phen is 1,10‐phenanthroline), ( II ), and 3D poly[diaquatetrakis(4,4′‐bipyridine)bis[μ₆‐5‐(4‐carboxylatobenzyloxy)isophthalato]di‐μ₃‐formato‐di‐μ₃‐hydroxido‐pentazinc(II)], [Zn₅(C₁₆H₉O₇)₂(HCOO)₂(OH)₂(C₁₀H₈N₂)₄(H₂O)₂]_n or [Zn₅(μ₄‐L)₂(bpy)₄(μ₂‐OH)₂(μ₃‐HCOO)₂(H₂O)₂]_n (bpy is 4,4′‐bipyridine), ( III ), have been constructed from the semi‐rigid tricarboxylic acid 5‐(4‐carboxybenzyloxy)isophthalic acid (H₃L) under hydrothermal conditions. CP ( I ) exhibits a twofold interpenetrated 3D+3D→3D skeleton with a 3 , 5 ‐conn topology constructed from triangular trinuclear [Zn₃(COO)₄(μ₃‐OH)] clusters, in which the H₃L ligand adopts three different coordination modes. CP ( II ) exhibits a 1D infinite chain and stacking that gives a 3D structure mediated by hydrogen bonds and weak interactions. CP ( III ) is an interesting 3D 3 , 4 , 8 ‐conn network including linear tetranuclear [Zn₄(μ₂‐OH)₂(HCOO)₂(COO)₂] clusters with a new {4·6²}₂{4·6⁴·8}{4⁶·6¹⁹·8³} topological symbol. The influences of the flexible –CH₂–O– linker of the H₃L ligand and subtle environmental factors, such as solvent, pH value and auxiliary ligands, on the formation of the final structures are also discussed. The solid‐state fluorescence spectra of CPs ( I )–( III ) were recorded at room temperature and all show better fluorescence performances than H₃L. In particular, ( II ) can act as a potential multifunctional fluorescent material for sensing hexavalent chromium ions in aqueous solution with high stability, selectivity and sensitivity. Under ultraviolet light of 365 nm from a UV lamp, a signal response of fluorescence from turning on to off can be observed with the naked eye. It was found that the detection for hexavalent chromium (i.e. Cr₂O₇^2?) by ( II ) has a high selectivity [K_SV = 1.61 × 10⁴M^?1 and limit of detection (LOD) = 0.434 µM] in aqueous solution. Quenching mechanisms were also studied in detail.     

云蒸霞蔚——多色双喷泉实验

本实验在氨气和氯化氢气体的单喷泉实验基础上设计了集两种气体的制备、收集、验满、尾气处理、气体反应、喷泉实验与试剂回收利用于一体的连续性实验,喷泉部分涉及到的实验原理有氨气与硫酸铜溶液的配位反应、氨气与氯化钴溶液的沉淀反应、无色酚酞溶液和酸性对硝基苯酚溶液在碱性环境下的变色反应,以及氯化铁和硫氰化钾在弱酸性条件下的反应等。本实验的主要仪器装置由团队自行设计、定制,操作简便,玻璃活塞还可控制喷发顺序,实现多色多样喷泉,伴随氯化铵生成时的袅袅白烟,云蒸霞蔚,煞是壮观。另外,我们设计了多角度的互动方案,针对不同程度知识背景的受众传授知识,让参观者真切感受到化学的魅力。     

基于分子催化剂光驱动水氧化器件的研究进展

光解水制氢是人们解决未来能源危机的一种重要构想,构建高效的光电化学池是实现这一构想的重要途径,而光驱动水氧化的顺利进行是实现这一过程的关键.本文总结了近年来基于分子催化剂及染料敏化的光驱动水氧化分子器件的研究和进展,介绍了这些分子器件的组装和性能研究等,并根据这些研究的优点和不足提出一些浅见.     

不同孪晶界密度银纳米线拉伸形变行为的分子动力学模拟

采用分子动力学方法模拟了不同孪晶界密度银纳米线的拉伸形变行为, 分析了孪晶界密度对多晶银纳米线屈服强度、弹性模量和塑性变形机理的影响. 在弹性形变区域, 孪晶界的存在对杨氏模量变化的作用不明显. 在塑性形变阶段, 首先从表面边缘开始产生位错成核, 然后延伸并受阻于孪晶界. 在进一步拉伸载荷作用下, 孪晶界将作为位错源产生新的位错. 模拟结果表明, 银纳米线的强度与孪晶界和晶粒的尺寸有关. 孪晶界密度较小(即晶粒的长径比大于1)时, 此纳米线的屈服应力比单晶纳米线还要小, 只有当孪晶界密度较大时(即晶粒的长径比小于1), 孪晶界使得纳米线得到强化. 综合分析了孪晶界和晶粒尺寸对银纳米线的影响, 为构建高强度金属纳米线打下基础. 最后讨论了温度和拉伸速度对孪晶纳米线屈服应力所产生的影响, 随着温度的升高, 孪晶纳米线与单晶纳米线的屈服应力差先升高后趋于稳定; 当拉伸速度逐渐增大, 孪晶纳米线与单晶纳米线的屈服应力差先稳定后增大.     

Hybrid Fibers Made of Molybdenum Disulfide,Reduced Graphene Oxide,and Multi‐Walled Carbon Nanotubes for Solid‐State,Flexible, Asymmetric Supercapacitors

One of challenges existing in fiber‐based supercapacitors is how to achieve high energy density without compromising their rate stability. Owing to their unique physical, electronic, and electrochemical properties, two‐dimensional (2D) nanomaterials, e.g., molybdenum disulfide (MoS₂) and graphene, have attracted increasing research interest and been utilized as electrode materials in energy‐related applications. Herein, by incorporating MoS₂ and reduced graphene oxide (rGO) nanosheets into a well‐aligned multi‐walled carbon nanotube (MWCNT) sheet followed by twisting, MoS₂‐rGO/MWCNT and rGO/MWCNT fibers are fabricated, which can be used as the anode and cathode, respectively, for solid‐state, flexible, asymmetric supercapacitors. This fiber‐based asymmetric supercapacitor can operate in a wide potential window of 1.4 V with high Coulombic efficiency, good rate and cycling stability, and improved energy density.