柔性有机场效应晶体管研究进展

柔性有机场效应晶体管具有可折叠、质量轻、低成本等优点,在柔性显示、柔性传感器、柔性射频标签和柔性集成电路等方面显示了广阔的应用前景.本文在介绍柔性有机场效应 晶体管最新研究进展的基础上, 总结了柔性有机场效应晶体管的器件结构和柔性有机场效应晶体管所使用的衬底材料、 栅绝缘层材料、有源层材料及电极材料, 阐述了柔性有机场效应晶体管的制备工艺, 并讨论了不同的弯曲方式对柔性有机场效应晶体管性能的影响, 最后总结和展望了柔性有机场效应晶体管的应用领域. 关键词： 柔性 晶体管 有机/聚合物 溶液加工     

三元铱配合物磷光体系的白光有机电致发光器件光谱特性研究

将黄光磷光材料bis[2-(4-tertbutylphenyl)benzothiazolato-N,C2’]iridium (acetylacetonate) [(t-bt)₂Ir(acac)]超薄层作为黄光发光层,两个蓝光磷光染料iridium(Ⅲ) bis(4’,6’-difluorophenylpyridinato)tetrakis(1-pyrazolyl)borate (FIr6)和bis[(4,6-difluorophenyl)-pyridinato-N,C2’](picolinate) iridium (Ⅲ) (FIrpic)掺杂层作为蓝光发光层,制备了三元发光层的白光有机电致发光器件。该器件具有三元磷光染料分子协同发光特性,并且利用合适厚度的隔层,将三线态激子束缚在各自激子复合区域内,获得了稳定电致发光光谱,CIE色坐标为(0.29±0.01, 0.34±0.01),处于理想的白光区域。通过器件电学特性的测试,验证了磷光染料在三元发光层器件中电致发光作用的机理,同时结果表明,三元发光层器件由于稳定的激子复合区域而有效减弱了器件效率滚降现象。     

Developing flexible procedural knowledge in undergraduate calculus

Mathematics experts often choose appropriate procedures to produce an efficient or elegant solution to a mathematical task. This flexible procedural knowledge distinguishes novice and expert procedural performances. This article reports on an intervention intended to aid the development of undergraduate calculus students’ flexible use of procedures. Two sections of the same course were randomly assigned to treatment and control conditions. Treatment students completed an assignment on which they resolved derivative-finding problems with alternative methods and compared the two resulting solutions. Control students were assigned a list of functions to differentiate. On the post-intervention test, treatment students were more likely to use a variety of solution methods without prompting than the control. Moreover, the set of treatment section solutions were closer to those of a group of mathematics experts. This study presents evidence that not only is flexible procedural knowledge a key skill in tertiary mathematics, it can be taught.     

计算机辅助电子线路实验的思考与探索

本文介绍了EltctronicWorkbench软件和计算机虚拟仪器系统，采用计算机模拟仿真技术对电子线路实验加以辅助设计和探索。     

Pixel-based partially coherent image method for maskless lithography system

Maskless lithography (ML) provides a fast and low-cost method for projecting the images of IC or micro features onto photoresist. However, it needs an efficient simulation method to evaluate the performance of lithography process. In this paper, a pixel-based partially coherent image method for digital micro-mirror device (DMD) based ML is proposed based on the linear invariant theory. In our method, the mask is sampled by DMD pixel (each pixel corresponding to each micro-mirror) and expressed by rect function. Using the shift theory of Fourier transform and the stacked pupil operator approach, we build a matrix Φ for system response function of rect function. If the DMD pixel state matrix is S, then the aerial image can be calculated with two matrix multiplication I(x,y) = SΦ.     

超导量子干涉器件

超导现象是一种宏观量子现象.磁通量子化和约瑟夫森效应是两个最能体现这种宏观量子特性的物理现象.超导量子干涉器件(superconducting quantum interference device,SQUID)是利用这两个特性而形成的超导器件.SQUID器件在磁信号灵敏探测方面具有广泛的应用.本文简要介绍低温超导和高温超导SQUID器件的相关背景和发展现状以及应用领域.     

Au-Nanoparticle-Array/Aligned-Ag-Nanowire-Based Flexible Dual Plasmonic Substrate for Sensitive Surface-Enhanced Raman Scattering Detection

The fabrication of flexible surface-enhanced Raman scattering (SERS) substrates for sensitive detection on uneven or irregular surfaces is challenging. In this study, a flexible dual plasmonic SERS (FDPS) substrate rationally constructed using Au nanoparticle (AuNP) arrays/aligned Ag nanowires (AgNWs) and elastic polyurethane (PU) is demonstrated. It exhibits high sensitivity (detection limit of 10⁻⁸ m for melamine and 10⁻¹⁰ m for malachite green) and excellent reproducibility. The well-designed structure of AuNP arrays/aligned AgNWs fabricated using block copolymer self-assembly and oil–water–air interfacial self-assembly successfully enhances the electromagnetic field through plasmonic coupling. In addition, the FDPS substrate retains a high SERS sensitivity after exposure to air at room temperature for 30 days because of the high stability of AuNP arrays and antioxidation characteristic of the PU covered on the aligned AgNWs. Even after undergoing stretching, bending, and twisting for 100 cycles, the FDPS substrate maintains a stable SERS activity owing to the introduction of the elastic PU. This study demonstrates a potential application of SERS detection under practical conditions for irregular surfaces and may be helpful in the development of flexible sensors.     

Influences of flexible defect on the interplay of supercoiling and knotting of circular DNA

Knots are discovered in biophysical systems, such as DNA and proteins. Knotted portions in knotted DNA are significantly bent and their corresponding bending angles are comparable with or larger than the sharp bending angle resulting in flexible defects. The role of flexible defects in the interplay of supercoiling and knotting of circular DNA were predicted by a Monte Carlo simulation. In knotted DNA with a particular knot type, a flexible defect noticeably enhances the supercoiling of the knotted DNA and the decreasing excitation energy makes the knotted portion more compact. A reduction in twist rigidity and unwinding of flexible defects are incorporated into the numerical simulations, so that interplay of supercoiling and knotting of circular DNA is studied under torsional conditions. Increasing unwinding not only results in a wider linking number distribution, but also leads to a drift of the distribution to lower values. A flexible defect has obvious effects on knotting probability. The summation of equilibrium distribution probability for nontrivial knotted DNA with different contour length does not change with excitation energy monotonically and has a maximum at an intermediate value of excitation energy around 5 kBT. In the phase space of knot length and gyration radius of knotted DNA, knot length does not anticorrelate with its gyration radius, which is attributed to the flexible defect in the knotted portion, which leads to the release of bending energy and inhibited the competition between entropy and bending energy.     

基于器件结构提高TADF-OLED器件的发光性能

为了提高以TADF材料作为主体、天蓝色荧光材料作为客体的混合薄膜的OLED器件光电性能,我们调整了器件结构,使主体材料发挥其优势。制备了基本结构为ITO/NPB(40 nm)/DMAC-DPS∶x%BUBD-1(40 nm)/Bphen(30 nm)/LiF(0.5 nm)/Al的OLED器件。研究了主-客体材料在不同掺杂浓度下的OLED器件的光电特性。为了提高主体材料的利用率,在空穴传输层和发光层之间加入10 nm的DMAC-DPS作为间隔层;然后,在阳极和空穴传输层之间加入HAT-CN作为空穴注入层,形成HAT-CN/NPB结构的PN结,有效降低了器件的启亮电压(2.7 V)。测量了有无HAT-CN的单空穴器件的阻抗谱。结果表明,在最佳掺杂比例(2%)下,器件的外量子效率(EQE)达到4.92%,接近荧光OLED的EQE理论极限值;加入10 nm的DMAC-DPS作为间隔层,使得器件的EQE达到5.37%;HAT-CN/NPB结构的PN结有效地降低了器件的启亮电压(2.7 V),将OLED器件的EQE提高到5.76%;HAT-CN的加入提高了器件的空穴迁移率,降低了单空穴器件的阻抗...     

Design of broadband achromatic metasurface device based on phase-change material Ge2Sb2Te5

Based on the phase-change material Ge₂Sb₂Te₅ (GST), achromatic metasurface optical device in the longer-infrared wavelength is designed. With the combination of the linear phase gradient GST nanopillar and the adjustment of the crystalline fraction m value of GST, the polarization insensitive achromic metalenses and beam deflector metasurface within the longer-infrared wavelength 9.5 μm to 13 μm are realized. The design results show that the achromatic metalenses can be focused on the same focal plane within the working waveband. The simulation calculation results show that the full-width at half-maximum (FWHM) of the focusing spot reaches the diffraction limit at each wavelength. In addition, the same method is also used to design a broadband achromatic beam deflector metasurface with the same deflection angle of 19°. The method proposed in this article not only provides new ideas for the design of achromatic metasurfaces, but also provides new possibilities for the integration of optical imaging, optical coding and other related optical systems.