Color Point Tuning in Lu3−x−yMnxAl5−xSixO12:yCe3+ for White LEDs

A series of the solid‐solution phosphors Lu_3?x?yMn_xAl_5?xSi_xO₁₂:yCe³⁺ is synthesized by solid‐state reaction. The obtained phosphors possess the garnet structure and exhibit similar excitation properties as the phosphor Lu₃Al₅O₁₂:Ce³⁺, but with an effectively improved red component in the emission spectrum. This can be attributed to the energy transfer from Ce³⁺ to Mn²⁺. Our investigation reveals that electric dipole–quadrupole interactions dominate the energy‐transfer mechanism and that the critical distance determined by the spectral overlap method is about 9.21 Å. The color‐tunable emissions of the Lu_3?x?yMn_xAl_5?xSi_xO₁₂:yCe³⁺ phosphor as a function of Mn₃Al₂Si₃O₁₂ content are realized by continuously shifting the chromaticity coordinates from (0.354, 0.570) to (0.462, 0.494). They indicate that the obtained material may have potential application as a blue radiation‐converting phosphor for white LEDs with high‐quality white light.     

Determination of Benzoyl Peroxide Levels in Wheat Flour and Pharmaceutical Preparations by Differential Pulse Voltammetry in Nonaqueous Media

Abstract

Benzoyl peroxide (BP) was determined by differential pulse voltammetry (DPV) using a glassy carbon electrode in a dichloromethane‐acetic acid (1.5×10^?2 mol l^?1) solution and tetrabutyl ammonium perchlorate (0.01 mol l^?1) as the supporting electrolyte. The peak potential was ?0.045 V (vs. Ag/AgCl). There was a good linear relationship between the peak current and the benzoyl peroxide concentration in the range of 2.5×10^?6–1.0×10^?4 mol l^?1. The detection limit of the method was 2.5×10^?7 mol l^?1. The recovery was 94.8–106.0%. The samples of wheat flour and the pharmaceutical preparations for the treatment of acne vulgaris were directly detected with desired results. The reaction mechanism of benzoyl peroxide on the electrode was also discussed, which was two electrons and two protons irreversible reaction.     

Determination of Copper by an Adsorption Differential Pulse Stripping Method with Naphthol Derivative

ABSTRACT

A simple, sensitive and selective method is proposed for the determination of copper(II) by adsorption-differential pulse stripping method. This method is based on the selective accumulation of the complexes of Cu(II) with l-(2-pyridylazo)-2-Naphthol and then reduction of the complex on a HMDE. The reduction current of the complex is about 0.0V vs. Ag/AgCl reference electrode at p8543146=4.0. The influences of various experimental parameters on the current peak were completely studied. The calibration graph was linear up to 50.0 ng/ml for a deposition time of 60 sec. The relative standard deviation was 2.3% (n=5) for Cu(II) concentration of 10.0 ng/ml, with a limit of detection of 0.2 ng/ml. The influence of potentially interfering ions was completely studied. The method has been applied for the determination of Cu(II) in water samples.     

Book reviews

Inorganic mercury ions (Hg²⁺) in laboratory prepared solutions were determined with a screen-printed carbon electrode (SPCE) coated with a polyaniline-methylene blue (PANI-MB) polymer layer. The structure and properties of the PANI-MB polymer layer were compared to that of normal polyaniline (PANI) in order to elucidate the structure of the PANI-MB layer. The electrically-conducting polymers were prepared by electrochemical polymerisation of monomer solutions of aniline, and mixed solutions of aniline with methylene blue onto respective screen-printed carbon electrodes (SPCEs). Scanning Electron Microscopy (SEM) analyses of the SPCE polymer coated electrodes have shown that nanostructured materials have formed with the diameters of the PANI nanoclusters and PANI-MB nanorods at approximately 200 nm. Anodic stripping voltammetry (ASV) was used to evaluate a solution composed of 1 × 10^?6 M Hg²⁺, in the presence of the SPCE/PANI-MB polymer sensor electrode. The Hg²⁺ ions were determined as follows: (i) pre-concentration and reduction on the modified electrode surface and (ii) subsequent stripping from the electrode surface during the positive potential sweep. The experimental conditions optimised for Hg²⁺ determination included the supporting electrolyte concentration and the accumulation time. The results obtained have shown that the SPCE/PANI-MB polymer sensor electrode operates optimally at a pH 2, with the supporting electrolyte concentration at 0.5 M HCl. A linear calibration curve was found to be in the range of 1 × 10^?8 M to 1 × 10^?5 M Hg²⁺ after 120 s of pre-concentration. The detection limit was calculated and found to be 54.27 ± 3.28 µg L^?1 of Hg²⁺. The results have also shown that a conducting polymer modified SPCE sensor electrode can be used as an alternative transducer for the voltammetric stripping and analysis of inorganic Hg²⁺ ions.     

Eu2+掺杂MgY2Al3Si2O11N青光荧光粉的制备和发光性能

采用高温固相法合成了一系列Eu²⁺掺杂的MgY²Al³Si²O¹¹N(MYASON)青光荧光粉。详细探讨了不同制备方法对荧光粉的物相结构和发光强度的影响,利用X射线衍射精修和X射线光电子能谱实验证明Si⁴⁺-N^3-离子对成功掺入石榴石晶格中。通过荧光光谱、寿命衰减曲线和变温光谱研究了发光性能,研究结果表明,用365 nm紫外光激发MYASON∶Eu²⁺荧光粉时,在青光区域呈现不对称宽带发射,峰值为490 nm,可以为紫外芯片激发的白光发光二极管有效提供青光成分。     

驱油用聚丙烯酰胺分子量测试的光散射研究

利用旋转流变仪分析了超高分子量部分水解聚丙烯酰胺溶液的流变性质,并根据光散射动态模式分析了其在不同浓度和不同盐离子浓度下的尺寸分布.建立了利用多角度激光光散射准确测量驱油用超高分子量聚丙烯酰胺重均分子量(Mw)、均方根回转半径()和第二位力系数值(A2)的方法.准确测量了商品化驱油用超高分子量聚丙烯酰胺FP3630S的这3个参数,分别为Mw=(1.33±0.06)×107,     

青霉素类药物的共振光散射光谱分析

本文研究了青霉素钠-碱性品红缔合物的共振散射光谱,建立了pH =7.5的C-L缓冲溶液中,共振光散射法测定青霉素钠的新方法.线性回归方程△IRu=1.74+5.17C,相关系数R=0.9981,检测限3.16×10-7mol/L.该方法简单快速,灵敏度高,对实际样品进行了测定,得到了令人满意的结果.     

Preparation, characterization of Mo, Ag-loaded BiVO4 and comparison of their degradation of methylene blue

Two types of metal-loaded visible-light-driven photocatalysts,Mo-BiVO4and Ag-BiVO4,were synthesized by wet impregnation method.Material poperties were characterized by UV-vis diffuse reflectance spectroscopy,X-ray diffraction,field emission scanning electron microscopy,X-ray photoelectron spectroscopy and low temperature nitrogen adsorption-desorption.Photocatalytic activity of the obtained materials was investigated through degrading methylene blue(MB) solution under visible-light irradiation.The results reveal that both metal loaded-BiVO4catalysts have monoclinic scheelite structure.Mo and Ag exist as oxides on the surface of the particles.The changes of absorption in visible-light region,band gap(E g) and specific surface area(A BET) caused by loading Ag are more obvious than those caused by loading Mo.But the isoelectric point of Ag-BiVO4decreases less than that of Mo-BiVO4does.Both catalysts show higher photocatalytic activity than pure BiVO4,resulting in the significantly improved efficiency of degradation of MB.And the degradation efficiency of these two metal-loaded BiVO4photocatalysts is similar to each other.However,mechanisms of such enhancement are different.The decrease of isoelectric point helps Mo-BiVO4improve the degradation efficiency.As for Ag-BiVO4,the augmentation of absorption in visible-light region as well as the abatement of E g plays more important roles.     

Construction of a light-emitting diode fluorescence detector for high-performance liquid chromatography and its application to fluorometric determination of L-3-hydroxybutyrate

This study employed a new light source, a light-emitting diode (LED), for fluorescence detection of high-performance liquid chromatography to measure the concentration of trace constituents in biological fluids. Using l-3-hydroxybutyrate ( l-3HB) as a tested trace compound, the function of the new system was compared with that of the current commercially available model. A detailed schematic diagram of the path of the detection rays in the LED detector is given. A voltage-stabilizer for the drive circuit was designed with an input of 10 V and an output of 8 V, and another voltage regulator was used to maintain a constant 8 V. Then the regulator was used to set the output voltage for the LED at 2.8 V by two external resistors. Replacing the xenon lamp with LED, this system provided higher photon density and a narrow spectrum at a wavelength of 491 nm. At room temperature (22.1°C), the average temperature of six places in the chamber of LED detector was 22.1°C compared with 51.1°C in the xenon detector. The spectra of the excitation light sources were measured. Compared with the xenon lamp, approximately 1.32 times higher excitation intensity was obtained by the LED source. The accuracy of detection of l-3HB in 50 μL of rat serum was 99.85-100.85%, and the intra-day and inter-day precision values were within 8.99 and 13.90%, respectively. The limit of detection of l-3HB was approximately 0.73 μM (signal-to-noise ratio 3). The sensitivity of the proposed LED detector was comparable to that of traditional fluorescence detectors using xenon arc lamps; however, the cost and operating temperature of LED lamps were far lower. This assay system could be further used to detect trace constituents in various samples.     

吖啶红共振散射光谱法测定痕量铁(Ⅲ)

在pH=3.2的HCl介质中,Fe(Ⅲ)氧化I-产生I2,I2与过量I-形成I-3,I-3与吖啶红(AR)通过静电引力缔合形成AR-I3离子缔合物(结合比为n(I-3)∶n(AR)=1∶1),AR-I3分子自动聚集形成(AR-I3)n缔合物微粒,从而引起共振散射光谱显著增强,其最大散射峰位于468 nm。 实验研究了介质条件、共振探针用量等因素对散射体系的影响,考察了该散射反应稳定性及共存物质的影响,并对反应机理和散射光谱增强的原因进行了探讨。 结果表明,Fe(Ⅲ)与共振光散射强度增强值ΔI468 nm在0.08～0.56 mg/L范围内呈现良好线性关系,检测限为5.76×10-7 g/L。 该方法有较好的选择性,可用于水样中痕量Fe(Ⅲ)的测定,结果与原子吸收法一致,回收率为96.0%～102.4%,相对标准偏差小于3.3%。