红外光谱研究甲烷和氧与SrO-La2O3/CaO表面的相互作用

在甲烷氧化偶联（ＯＣＭ）反应条件下，用原位红外光谱研究ＳｒＯ－Ｌａ２Ｏ３／ＣａＯ催化剂，结果表明，晶格氧使甲深度氧化，Ｌａ２Ｏ３和ＣａＯ具有活泼的晶格氧，ＳｒＯ的晶格氧比较稳定，气相氧通过催化剂表面消耗掉的晶格氧，加速甲烷了深度氧化，另一方面，催化剂表面的碳酸根物种在氧气氛下分解，在Ｌａ２Ｏ３和ＬＣ催化剂中，催化剂表面Ｌａ２Ｏ２（ＣＯ３）的分解形成配位不饱和的晶格氧Ｏ＾２－，并为气相氧吸附提供氧空     

THE ADSORPTION OF OXYGEN OVER ThO_2-BaF_2 CATALYST

IntroductionInthcsclcctivcoxidationofalkanes.suchas'theoxidativccouplingofmcthanc(0CM)andthcoxidativcdch}'drogenationofcthanc(0DE)t0prcparccth}'lene.bothoxidcionsofthelatticeandtheox}'genspeciesovercataIystsuffocepla}'animportantrole.Althoughcxtcnsivcinvcstigationshavcbeengivcntothecharactcrizationofox}'gcnspccicsandthcreactionofox}'gcnspecicsx`ithalkanes,itisstilldifficulttosayt`hichoncsofox}'gcnspcciesarcthcactivcspecicsinthcactivation0falkancs.bccauscthenaturcofcatal}'stsandthecxperimcntc…     

Optimization of Ormosil Films for Optical Sensor Applications

Recent work has indicated that Ormosil films, fabricated from organically modified precursors, produce better sensor performance for some specific applications, compared to films fabricated from conventional sol-gel precursors such as TEOS or TMOS. This paper aims to compare film properties and sensor behavior for films fabricated from tetraethoxysilane (TEOS) and tetramethoxysilane (TMOS) silica precursors and both methyltrimethoxysilane (MTMS) and methyltriethoxysilane (MTES) organically modified precursors. Microstructural differences, for example, porosity changes due to the different precursor backbone structures, are interrogated by monitoring oxygen gas and aqueous-phase sensor response. Oxygen sensing using these films is enabled by incorporating in the films an oxygen-sensitive ruthenium dye whose fluorescence is quenched in the presence of oxygen. Film properties such as thickness, thickness stabilization time, as well as sensor response, are discussed in terms of relative hydrolysis and condensation behavior for the different precursors. Film hydrophobicity, an issue which has been identified as being of crucial importance for optimum dissolved oxygen sensor response, is discussed and contact angle measurements are used to investigate the degree of hydrophobicity for different film types. The main motivation for this work is film optimization for optical gas-phase and dissolved oxygen sensors.     

Lu2O3对球形Ni(OH)2高温充放电性能的影响

为了改善镍电极的高温充电效率，采用机械混合的方式将球形Ni(OH)2与不同比例的Lu2O3混合后制成粘结式镍正极。充放电测试、循环伏安和XRD等实验结果表明，掺杂Lu2O3后镍电极的析氧过电位明显提高，高温充电效率得到了很大改善，在充电后的电极中β-NiOOH生成；而且Lu2O3的掺杂比例对镍电极的高温性能在不同的充放电倍率下有不同程度的影响，3．5％是最好的掺杂比例，掺杂对高温小电流充电效率的改善作用要大于高温大电流充电。     

Synthesis and characterization of oligo-4-[(pyridin-3-ylimino)methyl]phenol

The oxidative polycondensation of 4-[(pyridin-3-ylimino)methyl]phenol (4-PIMP) with O₂, H₂O₂, and NaOCl was studied in an aqueous alkaline medium between 50°C and 90°C. Oligo-4-[(pyridin-3-ylimino)methyl]phenol (O-4-PIMP) prepared was characterized by ¹H-NMR, ¹³C-NMR, FT-IR, UV-VIS, size-exclusion chromatography, and elemental and thermal analyses techniques. At the optimum reaction conditions, the yield of O-4-PIMP was 18.9%, 39.4%, and 46.8% using H₂O₂, O₂, and NaOCl oxidant, respectively. According to the TG analysis, the initial degradation temperature of O-4-PIMP was 218°C, which was by 50°C higher than that of 4-PIMP. Thermal analyses of 4-PIMP and O-4-PIMP were carried out in N₂ atmosphere at 15–1000°C. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, and electrochemical energy gaps of 4-PIMP and O-4-PIMP were determined from the onset potentials for n-doping and p-doping, respectively. Also, optical band gaps of 4-PIMP and O-4-PIMP were determined according to UV-VIS measurements.     

掺杂ZrO＿2的Pt／Al＿2O＿3表面氧性质及一氧化碳氧化性能研究

用ＴＰＤ－ＭＳ、ＴＰＳＲ－ＭＳ及ＣＯ氧化活性测定等方法研究了Ｐｔ／Ａｌ２Ｏ３和掺杂超细ＺｒＯ２的样品的表面氧脱出－恢复性能、ＣＯ表面氧化性能及催化氧化性能．结果表明，在Ｐｔ／Ａｌ２Ｏ３中掺杂ＺｒＯ２后，样品表面上的氧物种脱出和氧化恢复性能明显提高，脱氧量也明显增大；并发现在ＣＯ－ＴＰＳＲ过程中程脱物ＣＯ２的脱附量大小及峰顶温度次序与对ＣＯ的催化氧化活性也有一致的关系     

低分子量溴代聚苯乙烯的制备及应用

用溶液法合成了一系列低分子量的聚苯乙烯，其溴化产物（Ｂｒ－ＰＳ）的溴含量和热稳定性与美国同类产品Ｐｙｒｏ－Ｃｈｅｋ ＬＭ相当，分别用作聚苯乙烯树脂的阻燃剂，极限氧指数测定结果表明，其阻燃性也达到了Ｐｙｒｏ－Ｃｈｅｋ ＬＭ的水平。     

Synthesis of Cyanobenzaldehydes （m—,o—,p—）by Molecular oxygen Oxidation Methods

Cyanobenzaldehydes (m-,o-,p-) were synthesized by oxidation of corresponding tolunitriles with molecular oxygen,catalyzed by cobalt acetate and sodium bromide.     

Transients of the Open-Circuit Potential Observed during the Interaction of Formic Acid with Preliminarily Adsorbed Oxygen on a Platinized Platinum Electrode

Transients of the open-circuit potential, which are observed during the interaction of formic acid with preliminarily adsorbed oxygen (O_ads) on a Pt/Pt electrode in 0.5 M H₂SO₄, are measured. It is established, by means of the method of cathodic potentiodynamic pulses, that the slowest interaction of formic acid with O_ads occurs in the region of large coverages of the electrode surface by oxygen (θ_O ∼1–0.8). A presumption is put forward that the process rate in this region is defined by a direct reaction of O_ads with molecules of formic acid from the bulk solution. It is shown that the interaction of formic acid with O_ads in the region of intermediate coverages (θ_O ∼ 0.8–0.2) proceeds via a mechanism of “conjugated reactions.” Transients of the open-circuit potential for formic acid are compared to transients for carbon monoxide obtained in analogous conditions. The substantially shorter overall time of potential decay in the case of CO (at the same concentrations) is caused by a faster reaction of CO with adsorbed oxygen in the region of large θ_O. The difference is explained by assuming that the HCOOH adsorption as opposed to CO bears a dissociative character.__________Translated from Elektrokhimiya, Vol. 41, No. 8, 2005, pp. 936–942.Original Russian Text Copyright © 2005 by Manzhos, Maksimov, Podlovchenko.     

Transient multi pulse method for the determination of N2O - interaction with ZSM-5 type zeolites

Summary Multipulse experiments reveal qualitative and quantitative, time-resolved information about the interaction of N₂O with ZSM-5 type zeolites under conditions of catalytic applications, like the mechanism of N₂O decomposition, amount and reactivity of an atomic surface oxygen species.