基于路径选择的深海水下运动目标被动深度估计

深海水下运动目标的深度估计是目标分辨与识别中的重要一环。基于深海运动目标在深海中的直达波与海面反射波的到达时延与位置之间的关系,寻找时延图上运动目标的候选路径,利用候选路径模拟目标的运动路径,提出了一种可用单水听器实现的水下运动目标深度估计方法。通过用候选路径的估计时延与实际接收时延的比较对路径进行筛选,从而减少了需要的位置先验信息。2018年在南海进行的深海实验数据处理的结果表明该估计方法可行,对于实验中距离15km以内的拖曳声源,深度相对估计误差可以达到15%以内。     

Wettability and surface energy of parylene F deposited on PDMS

For the first time, the wettability and surface energy of parylene F were investigated. The results showed that parylene F had a hydrophobic surface with an eigen water contact angle of 104.7 ± 0.6°. We found that 3.5 μl probe liquid was an optimal value for the contact angle measurement of parylene F. Moreover, we found that the Lifshitz–van der Waals/acid–base approach was unsuitable for determining the surface energy of parylene F, whereas the Owens–Wendt–Kaelble approach and the limitless liquid–solid interface wetting system were compatible. The surface energy of parylene F was estimated to be 27.06 mJ/m² (Owens–Wendt–Kaelble) and 40.41 mJ/m² (Limitless liquid-solid interface wetting system). Furthermore, this investigation also provided a reference for the applications of empirical and physics-based semi-empirical approaches for the estimation of surface energy.     

矿产品水分含量代表值Bootstrap模拟取样估计

在对矿产品水分含量基础统计学特征描述的基础上,采用内核密度估计对水分含量数据多态性进行了分析,根据双态分布的特点,使用Bootstrap模拟取样方法对试验样本值模拟重复取样,以多次Bootstrap模拟取样的均值与标准偏差作为矿产品水分含量有限样本代表值及标准偏差的稳健估计,实践证明Bootstrap模拟取样估计对矿产品水分含量代表值的估计是有效的,该项研究为矿产品水分含量代表值的准确评估提供了一种新方法.     

Evaluation of tocopherol recovery through simulation of molecular distillation process

DISMOL simulator was used to determine the best possible operating conditions to guide, in future studies, experimental works. This simulator needs several physical-chemical properties and often it is very difficult to determine them because of the complexity of the involved components. Their determinations must be made through correlations and/or predictions, in order to characterize the system and calculate it. The first try is to have simulation results of a system that later can be validated with experimental data. To implement, in the simulator, the necessary parameters of complex systems is a difficult task. In this work, we aimed to determe these properties in order to evaluate the tocopherol (vitamin E) recovery using a DISMOL simulator. The raw material used was the crude deodorizer distillate of soya oil. With this procedure, it is possible to determine the best operating conditions for experimental works and to evaluated the process in the separation of new systems, analyzing the profiles obtained from these simulations for the falling film molecular distillator.     

对"联邦滤波器信息分配系数的优选算法"一文的商榷

介绍了联邦滤波算法和信息分配原理，指出《中国惯性技术学报》第11卷第6期“联邦滤波器信息分配系数的优选算法”一中存在一些问题，说明使用该优选算法进行信息分配，可能使主滤波器方差阵失去正定性；将联邦滤波用于GPS姿态测量，实验表明动态选择信息分配因子，相对于固定信息分配因子的算法并没有明显优势。     

一类改进最大熵方法的可调参数分析

在结构可靠性分析中,引入含可调参数的转换函数能对传统的最大熵方法进行改进,获得更高的失效概率预测精度。但是,此可调参数的最佳取值很难确定。针对这一问题,引入概率守恒方程,从功能函数转换前后所得概率密度函数出发,建立其最大熵值的变化关系,给出转换前后最大熵值之差的理论形式。通过对三种典型单调非线性转换函数开展算例研究,发现功能函数转换前后的最大熵值之差与转换函数的最佳可调参数值有关。改变可调参数值驱使最大熵值之差变化的同时,改进最大熵方法能遍历到更好的失效概率估计值。     

用声信号识别构件模态频率

本文提出一种新的模态分析方法—用声信号识别构件模态频率.传声器不与结构表面接触,消除了附加质量的影响.同时,结合时间序列谱分析法改善并提高了响应谱的精度.     

Empirical likelihood for AR-ARCH models based on LAD estimation

By employing the empirical likelihood method,confidence regions for the stationary AR(p)-ARCH(q) models are constructed.A self-weighted LAD estimator is proposed under weak moment conditions.An empirical log-likelihood ratio statistic is derived and its asymptotic distribution is obtained.Simulation studies show that the performance of empirical likelihood method is better than that of normal approximation of the LAD estimator in terms of the coverage accuracy,especially for relative small size of observation.     

Logistic和Lotka-Volterra模型参数的灰色估计方法研究

根据灰色系统建模原理,对Logistic模型中的参数进行了估计,将此方法应用于Gause(1934)草履虫实验数据的拟合,并与已有拟合结果对比,说明此方法是有效的.然后将其推广至两种群的Lotka—Volterra模型参数的确定,来研究山西省人口—经济系统的发展演化状况,得出了满意的结果.     

基于半参数回归模型的最小一乘局部线性算法

根据最小一乘准则,推导出最小一乘局部线性估计的计算方法,并通过对模拟数据的计算和分析,对比最小一乘核算法和最小二乘局部线性算法,验证了最小一乘局部线性算法是一种有效的,稳健的估计方法,并且有降低边界效应的作用．