变压器寄生参数和负载特性对高压脉冲波形的影响

构建了输出电压幅值为0～20 kV、脉冲重复频率为0.25～20 kHz的双极性高压脉冲电源实验平台,研究了变压器寄生参数与负载特性对输出脉冲波形的影响。采用等效电路复频域解析方法,分析了变压器寄生参数对输出脉冲波形的上升沿、平顶及下降沿的影响规律,并通过改变变压器绕线方案间接验证。发现变压器分布电容和漏感越大,输出脉冲波形上升沿与下降沿越平缓,过冲电压幅值越大,并采用脉冲变压器二次侧均匀密绕、一次侧均匀疏绕、高匝数的方案进行优化。进一步分析了纯阻性、阻容性或阻感性负载特性对输出高压脉冲波形的影响规律,发现电阻值增大（5～50 kΩ）,过冲电压幅值增大,脉冲上升沿和下降沿变陡;当负载电阻回路串联小电容时,过冲电压幅值显著增大,而电容值高于一定值时输出脉冲波形恢复至与纯电阻波形一样;当负载电阻回路串联电感时,输出脉冲波形下降沿变平缓。     

一个高精度收敛的变系数微分方程精确解析法*

文[1]给出精确解析法,可用于求解任意变系数微分方程,所得到的解具有二阶收敛精度.在此基础上,本文以变截面梁弯曲为例,给出一个高精度的算法.不增加工作量的情况下可达到四阶收敛精度.具有计算快,简单等特点,文末给出算例,仅用很少的单元即可获得高的收敛精度,表明了本文理论的正确性.     

用等效网络方法求均匀弹簧纵振动的本征频率

利用机电类比方法导出了均匀质量弹簧在几种特定边界条件下的本征频率方程,并给出了相应的本征频率公式。体现了等效网络理论分析机械振动问题的优越性。     

Comment on “A comparison of the von Mises and Hencky equivalent strains for use in simple shear experiments”

Onaka has shown (2010) that the Hencky equivalent strain is the appropriate quantity to represent the degree of severe plastic deformation based on simple-shear deformation. In a recent paper, Shrivastava et al. have criticized (2011) the Onaka paper and stated that the Hencky formulation does not apply to large simple-shear deformation. In this response, it is shown that this claim of Shrivastava et al. is not consistent with recent accepted knowledge on the Hencky strain.     

Decompositions of Fundamental Groups of Closed Surfaces into Free Constructions

Let T be a closed surface. It is proven that any decomposition of ₁(T,x) into an amalgamated product (or, more generally, into the fundamental group of a finite graph of groups) with f.g. edge group(s) is almost geometric. A problem of H. Zieschang is solved and the edge rigidity property is investigated.     

C*-丛中的Morita等价定理

给定C^*-丛(E，P，G)．首先证明了E上循环*表示由Ea决定；然后证明了：C^*(E)与E0强Morita等价．     

Direct numerical simulation methods of hypersonic flat-plate boundary layer in thermally perfect gas

High-temperature effects alter the physical and transport properties of air such as vibrational excitation in a thermally perfect gas,and this factor should be considered in order to compute the flow field correctly.Herein,for the thermally perfect gas,a simple method of direct numerical simulation on flat-plat boundary layer is put forward,using the equivalent specific heat ratio instead of constant specific heat ratio in the N-S equations and flux splitting form of a calorically perfect gas.The results calculated by the new method are consistent with that by solving the N-S equations of a thermally perfect gas directly.The mean flow has the similarity,and consistent to the corresponding Blasius solution,which confirms that satisfactory results can be obtained basing on the Blasius solution as the mean flow directly in stability analysis.The amplitude growth curve of small disturbance is introduced at the inlet by using direct numerical simulation,which is consistent with that obtained by linear stability theory.It verified that the equation established and the simulation method is correct.     

MECHANICAL ANALYSIS OF TOROFLUX

流动环是一款魔术玩具,具有丰富的力学行为。制作流动环时应用了预应力储存技术,使得环内部储存了弹性弯曲变形能。一经外界扰动,流动环会迅速张开,进入一种新的稳定平衡状态;若给张开的流体环输入某种形式的能量,环会合拢,恢复原有的稳定平衡状态。本文从能量的角度对流动环张开与合拢等现象进行力学分析。     

Modification to the Fringe Component of Diffraction Coefficient in TD-EEC Method

A modified formulation for fringe component of diffraction coefficient is implemented to TD-EEC method. An example of diffraction by perfectly conducting plate is used to illustrate our scheme. Comparing with the FDTD results we observe that the improved expression for fringe component is more accurate than that of Michaeli's formulation. This high frequency time domain technique is available for treating the bistatic scattering problems for millimeter waves.     

用于测量熔合反应的静电偏转板介绍

An electrostatic deflector for separating the fusion evaporation residues from the beam-like products in heavy ion reactions was installed. The evaporation residue separation and identification with the electrostatic deflector setup was tested with the reaction ^32S＋^96Zr at several energies. The fusion evaporation residues and the beam-like particles were well separated after the electrical separation and the experimental fusion cross section obtained from the angular distribution is in good agreement with the calculated value well above the Coulomb barrier. This confirms the reliability of the setup.