金属丝网——油液介质耦合减振器抗冲击动态力学特性研究

基于金属丝网－油液介质耦合减振器原理样机的抗冲击动态力学特性进行研究，样机的多参数匹配冲击试验研究表明该减振器具有强非线性动态特征，并能实现抗大冲击；在此基础上结合流体理论和库伦摩擦理论建立了原理样机非线性冲击动态特性模型，研究减振器抗冲击力学特性的设计可控性，该建模方法直接引入结构参数，为直接设计具体的器件建立了理论基础。     

Influence of damage on properties of strain localization in geomaterials at plane stress and plane strain

Summary By regarding geomaterials under loading as a mixture of intact and damaged parts, we investigate the influence of damage on the properties of strain localization in elastoplastic geomaterials at plane stress and plane strain. Conditions for the onset of strain localization including the effects of damage are derived for the cases of plane strain and plane stress. Discussed are the inclination of the localized band and the hardening modulus corresponding to the onset of strain localization. It is shown that the properties of the strain localization are dependent on the damage and the capacity of bearing hydrostatic pressure by the damaged part, and that damage may induce an earlier onset of strain localization and lead to instability of a geomaterial.accepted for publication 11 March 2004     

从自由试验提取约束结构模态

已有的“从自由试验提取约束结构模态”的动柔度法，仅适用于刚性支承情况．在工程中，弹性支承状态是常见的，为此，建立了这一情况下的提取方法．该方法具有普遍性，因为当支承刚度很大时，可得到刚性支承下的结果；当支承刚度很小时，便可获得工程中用橡皮绳悬吊结构后所测得的自由-自由试验模态．总之，当支承刚度为任何值时，用此方法都能提取到相应约束结构的满意试验模态参数．表明该算法是非常稳定的，对于工程应用至关重要．     

弹性地基梁振动特性的近似分析方法

文中介绍了用模态摄动法分析复杂情况下弹性地基梁动力特性的近似方法。这一方法中可考虑纵向钢筋以及变地基弹性系数对弹性地基梁振动特性的影响，通过算例说明了这一方法的有效性。     

水坝在水流作用下动力响应的一种分析方法

以广东某水坝为研究对象,给出一种基于Fluent平台和Ansys平台进行结构动力响应分析的方法。首先采用基于YOUNGS界面重构技术的VOF模型,对流动进行数值模拟,成功捕捉了闸门开启过程中自由面的变化,比较了在三种落差情况下水坝的受力差异。计算表明,即使在上游平稳的入流条件下,水坝所受到的湍流水压力也会出现波动现象,水压力对坝体的冲击为低频作用,下游水位的升高会减缓水压力的波动,这些特点都与现场观察的相符。然后将水动力作为激励条件导入结构动力分析平台Ansys后,进一步对坝体结构进行动力分析。结构的模态分析结果与实测结果一致。因此,方法可以应用于实际。     

Near-Boundary Stress Wave Field in Anisotropic Plates under Impulsive Load

The stress wave field and the behavior of waves near the free boundary in an orthotropic plate and at the interface between two anisotropic media are studied. The results presented were obtained using the dynamic photoelastic method and optically sensitive fibrous models. Experimental data for impulsively loaded plates with various boundary conditions are analyzed     

Micromechanics of residual stress and texture development due to poling in polycrystalline ferroelectric ceramics

This paper presents micromechanics based analysis of elastic strain and changes in the texture of poled polycrystalline ferroelectric PZT ceramics for direct comparison with synchrotron X-ray measurements. The grains are modelled as spherical inclusions, to which transformation strains are assigned depending on the fractions of different ferroelectric domains. Eshelby's inclusion problem with the classical self-consistent method is applied to evaluate the elastic state of the grains. In particular, the elongation due to lattice elastic strain is calculated as a function of inclination Ψ relative to the polar axis. The ratio of diffraction peak intensities, corresponding to the domain fractions, is also expressed as a function of Ψ. This analysis identifies the special character of the reflection, for which the lattice strain along in the stress free state is independent of ferroelectric domain population and hence unaffected by poling. The elongation due to the lattice strain parallel to and peak intensity ratio are expressed in terms of the overall macroscopic strain of a poled specimen, each having a dependence.     

吊车压轨器强度的实验测试

宽厚板厂房的行车轨道在行车运行时承受来自行车水平导向轮的水平推力，该水平推力可能导致压轨器破坏，为确保压轨器的安全设计，采用平面光弹性、三维光弹性进行实验测试，分析在最不利工况下，各种压轨器所承担的水平推力份额，压轨器的变形和应力分布，给出强度分析评估，确定系统中各个压轨器以及固定螺栓的关键部位的应力水平。     

Dynamic stress of a circular cavity buried in a semi-infinite functionally graded piezoelectric material subjected to shear waves

The paper presents a theoretical method to investigate the multiple scattering of shear waves and dynamic stress around a circular cavity in a semi-infinite functionally graded piezoelectric material. The analytical solutions of wave fields are expressed by employing wave function expansion method and the expanded mode coefficients are determined by satisfying the boundary conditions of the cavity. Image method is used to satisfy the free boundary condition of the semi-infinite structure. According to the analytical expression of this problem, the numerical solutions of the dynamic stress concentration factor around the cavity are presented. The effects of the piezoelectric property, the buried depth of the cavity, the incident wave number and the nonhomogeneous parameter of materials on the dynamic stress around the cavity are analyzed. Analyses show that the piezoelectric property has great effect on the dynamic stress in the region of intermediate frequency and the effect increases with increasing wave number. When the nonhomogeneous parameter of materials is less than zero, it has less influence on the maximum dynamic stress around the cavity; however, it has greater influence on the distribution of the dynamic stress around the cavity. When the nonhomogeneous parameter of materials is greater than zero, it has greater influence on both the maximum dynamic stress and the distribution of dynamic stress around the cavity, especially in the case that the buried depth is comparatively small.     

Solution of axisymmetric dynamic problems for cylindrical shells on an elastic foundation

A dynamic problem for a cylindrical shell on an elastic foundation is formulated. A numerical algorithm for solving this problem is outlined. The results obtained are analyzed __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 12, pp. 103–109, December 2007.