蔡氏对偶混沌电路分析

提出了一个新颖的蔡氏对偶混沌电路,并进行了深入的理论研究和计算机仿真分析.得出了几点结论:1)此混沌电路元器件少,且与蔡氏混沌电路结构完全对偶.2)在确定的元器件参数条件下,电路出现双涡卷奇怪吸引子和丰富的混沌动力学行为. 关键词： 蔡氏对偶电路 奇怪吸引子 混沌     

Aktivierungsanalytische Untersuchung von Zirkoniumlegierungen

Durch Aktivierungsanalyse mit Reaktorneutronen (zerstörungsfrei und mit chemischer Aufarbeitung) sowie mittels zerstörungsfreier Untersuchungen an einem Neutronengenerator wurden O, Al, Si, P, Mn, Cu, Nb, Mo, Cd, Ti, Cr und Hf in Zirkoniumlegierungen bestimmt.     

时基反馈控制的Tesla变压器初级电源

LC谐振充电是Tesla变压器常用的初级电容充电技术,但存在对控制时序要求高、易受电磁干扰和不具备故障保护能力等缺陷。针对这个问题,提出了一种时基反馈控制的LC谐振充电电源。该电源与传统LC谐振电源的主要区别在于,采用特殊设计的时基反馈电路取代多路时基控制器,将能量回收开关反向阻断瞬间的电压突变调制为谐振晶闸管触发信号,从而在能量回收结束时刻启动谐振充电,实现各工作回路准确按照预定时序运行。时基反馈电路由高压元件构成,不易受电磁干扰,且在原理上具备负载短路保护能力。该技术已经应用于CKP1000,CKP5000等多台Tesla型超宽谱脉冲源。实验结果表明,在强脉冲辐射环境下,该电源能够1000 Hz重频稳定运行,且能够在Tesla变压器初级短路故障时进行快速自动保护。     

A non-overlapping domain decomposition dual reciprocity method for solving the forward–backward heat equation in two-dimension

We apply a boundary element dual reciprocity method (DRBEM) to the numerical solution of the forward–backward heat equation in a two-dimensional case. The method is employed for the spatial variable via the fundamental solution of the Laplace equation and the Crank–Nicolson finite difference scheme is utilized to treat the time variable. The physical domain is divided into two non-overlapping subdomains resulting in two standard forward and backward parabolic equations. The subproblems are then treated by the underlying method assuming a virtual boundary in the interface and starting with an initial approximate solution on this boundary followed by updating the solution by an iterative procedure. In addition, we show that the time discrete scheme is unconditionally stable and convergent using the energy method. Furthermore, some computational aspects will be suggested to efficiently deal with the formulation of the proposed method. Finally, two forward–backward problems, for which the exact solution is available, will be numerically solved for two different domains to demonstrate the efficiency of the proposed approach.     

Complementary energy principle for large elastic deformation

Using the “base forces” as the fundamental unknowns to determine the state of an elastic system, the complementary energy principle for large elastic deformation is constructed for the conjugate quantities being displacement gradients, which possesses exactly the same form as that of classical linear elasticity. It is revealed that the complementary energy contains deformation part and rotation part.     

邻硝基苯甲醛缩对乙酰基苯胺希夫碱的结构与光谱的理论研究

利用实验方法测定了标题化合物的紫外吸收光谱、荧光发射光谱和相对荧光量子产率,结果表明该化合物具有较强的荧光性质。采用密度泛函理论(density functional theory, DFT)中的杂化密度泛函B3LYP方法,在6-311G(d)基组水平上对该化合物基态分子构型进行了几何结构全优化,得到了其最稳定构型、总能量及HOMO与LUMO能级差。研究结果说明：分子具有较强的芳香性和较大的共轭体系。振动频率分析说明,标题分子优化后的结构稳定。将优化后的基态结构应用含时密度泛函理论(TD-DFT),在B3LYP/6-311G水平上计算并研究了此化合物的吸收光谱。用单激发组态相互作用(single-excitation configuration interaction, CIS)法优化了标题分子的激发态构型,并在此基础上用TD-DFT//B3LYP/6-311G方法计算了这种化合物的发射光谱。结果表明,理论计算的光谱数据与实验结果较吻合。     

Ge组分分布对基区杂质非均匀分布的SiGe HBT温度特性的影响

众所周知, 双极型晶体管的设计主要是基区的设计. 一般而言, 基区的杂质分布是非均匀的. 本文首先研究了非均匀的杂质高斯分布对器件温度分布、增益和截止频率的温度特性的影响, 发现增益和截止频率具有正温度系数, 体内温度较高. 随后研究了基区Ge组分分布对这些器件参数的影响. 均匀Ge组分分布和梯形Ge组分分布的SiGe 异质结双极型晶体管增益和截止频率具有负温度系数, 具有较好的体内温度分布. 进一步的研究表明, 具有梯形Ge组分分布的SiGe 异质结双极型晶体管, 由于Ge组分缓变引入了少子加速电场, 不但使它的增益和截止频率具有较高的值, 而且保持了较弱的温度敏感性, 在增益、特征频率大小及其温度敏感性、体内温度分布达到了很好的折中.     

一种新型多芯-双模-大模场面积光纤的设计和分析

提出了一种新型双空气孔多芯-双模-大模场面积光纤结构, 计算了其模场分布、基模有效面积及弯曲损耗特性, 分析了各结构参量对其有效折射率及有效面积的影响. 这种结构在增大有效面积的同时使得二阶模的TE₀₁, TM₀₁模截止, 实现双模传输, 基模有效面积约为1044 μm².调整其结构参量, 甚至可以达到单模传输.这种结构制作简单、设计灵活, 可用于高速大容量无源光纤及有源器件中.合理设计各结构参量, 可以使有效面积达到3512 μm²甚至更高, 从而满足光通信领域中大容量、高功率传输等实际应用的需求. 关键词： 多芯光纤 双模 大模场面积 弯曲损耗     

Analyzing radiation absorption difference of dental substance by using Dual CT

The purpose of this study was to evaluate the changes of noise and computer tomography (CT) number in each dental substance, by using the metal artefact reduction algorithm; we used dual CT for this study. For the study, we produced resin, titanium, gypsum, and wax that are widely used by dentists. In addition, we made nickel to increase the artefact. While making the study materials, we made sure that there is no difficulty when inserting the substances inside phantom. In order to study, we scanned before and after using the metal artefact reduction algorithm. We conducted an average analysis of CT number and noise, before and after using the metal artefact reduction algorithm. As a result, there was no difference in CT number and noise before and after using the metal artefact reduction algorithm. However, when it comes to the noise value in each substance, wax's noise value was the lowest whereas titanium's noise value was the highest, after applying the metal artefact reduction algorithm. In nickel, CT number and noise value from artefact area showed a decreased noise value when applying the metal artefact reduction algorithm. In conclusion, we assumed that we could increase the effectiveness of CT examination by applying dual energy's metal artefact reduction algorithm.     

采用多元化的教学手段,提高物理人才的综合素质——南开大学物理学基础科学人才培养基地建设经验介绍

介绍了南开大学国家物理学基础科学研究人才培养基地在十多年的建设中,通过多元化的教学手段提高学生的学习自主性,通过加强科研训练提高物理人才综合素质的经验和取得的成果.