阴离子导向组装：两个具有不同阳离子的多维Ag(I)配合物的晶体结构

Assembly of [Ag（CN）2]^- units with M（Ⅱ）-diamine complex cations [Cu（LN-N）2]^2＋, where LN-N represents L2-diaminopropane （pn） and ethylenediamine （en）, afforded two complexes, [Cu（pn）2][Ag2（CN）4] （1） and [Cu（en）2][Ag3（CN）5] （2）, which were characterized by elemental analysis, IR, UV-Vis and ESR spectra. Single crystal X-ray analyses show that these complexes have 2D and 3D architectures through silver-silver interactions and other weak interactions. The luminescence behaviors of the two complexes were also studied by means of emission spectra.     

N—乙基—N—苄基苯胺合成方法的改进

以苯胺和乙醇为原料，采用ＲａｎｅｙＮｉ为催化剂，合成了Ｎ－乙基苯胺，再在相转移催化剂作用下，经苄基化反应得到标题化合物，第一步合成方法的收率比通常方法的收率提高约３０％。     

A highly rigid diamine monomer derived from naturally occurring myo‐inositol and its use for polyamide synthesis

A rigid diamine was synthesized from myo‐inositol, a naturally occurring cyclic hexaol, and used as a monomer to synthesize polyamides. myo‐Inositol was treated with 1,1‐dimethoxycyclohexane to yield a bisketal bearing two hydroxyl groups, and from this bisketal, the target diamine was synthesized in three steps: (1) derivation of the diol into the corresponding bistriflate, (2) nucleophilic substitution of the bistriflate with sodium azide yielding a diazide, and (3) reduction of the diazide to the target diamine. The target diamine readily underwent polycondensation with dicarboxylic acid chloride in solution. The resulting polyamides, whose main chain inherited the rigid 5‐6‐5 system from the diamine monomers, have high glass transition temperatures. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3436–3443     

Synthesis and characterization of 9,9‐bis(4‐hydroxyphenyl and 4‐aminophenyl)dibenzofluorenes: Novel fluorene‐based monomers

Two novel 9,9‐difunctionalized fluorene‐type monomers, 9,9‐bis(4‐hydroxyphenyl‐ and 4‐aminophenyl)‐2,3:6,7‐dibenzofluorenes, are synthesized by the reaction of dibenzenzofluorenone with phenol and aniline. These monomers are used for the preparation of polyester and polyimide as the typical polymers to evaluate the property change such as thermal stability caused by the benzene rings fused to the fluorene skeleton with keeping good solubility, in comparison with the polymers derived from simple fluorenone. In fact, these two new polymers have the fairly enhanced thermal stability and refractive index value along with satisfactory solubility in organic solvents, enough to emphasize the fusion effect. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2602–2605     

Assembled synthesis of luminescent mono/double‐layered 2D and 3D Zn (II)‐based coordination polymers tuned by flexible bis (pyridyl)propane‐1,2‐diamines and diverse organic dicarboxylates

Six mono/double‐layered 2D and three 3D coordination polymers were synthesized by a self‐assembly reaction of Zn (II) salts, organic dicarboxylic acids and L1/L2 ligands. These polymeric formulas are named as [Zn(L1)(C₄H₂O₄)_0.5 (H₂O)]_n·0.5n(C₄H₂O₄)·2nH₂O ( 1 ), [Zn₂(L2)(C₄H₂O₄)₂]_n·2nH₂O ( 2 ), [Zn(L1)(m‐BDC)]_n ( 3 ), [Zn₂(L2)(m‐BDC)₂]_n·2nH₂O ( 4 ), [Zn₃(L1)₂(p‐BDC)₃(H₂O)₄]_n·2nH₂O ( 5 ), [Zn₂(OH)(L2) (p‐BDC)_1.5]_n ( 6 ), [Zn₂(L1)(p‐BDC)₂]_n·5nH₂O ( 7 ), [Zn₂(L2)(p‐BDC)₂]_n·3nH₂O ( 8 ) and [Zn₂(L1)(C₄H₄O₄)_1.5(H₂O)]_n·n(ClO₄)·nH₂O ( 9 ) [L1 = N,N′‐bis (pyridin‐4‐ylmethyl)propane‐1,2‐diamine, L2 = N,N′‐bis (pyridin‐3‐ylmethyl)propane‐1,2‐ diamine, m‐BDC^2? = m‐benzene dicarboxylate, p‐BDC^2? = p‐benzene dicarboxylate]. Meanwhile, these polymers have been characterized by elemental analysis, infrared, thermogravimetry (TG), photoluminescence, powder and single‐crystal X‐ray diffraction. Polymers 1–6 present mono‐ and double (4,4)‐layer motifs accomplished by L1/L2 ligands with diverse conformations and organic dicarboxylates, and the layer thickness locates in the range of 5.8–15.0 Å. In three 3D polymers, the L1 and L2 molecules adopt the same cis‐conformations and join adjacent Zn (II) cations together with p‐BDC^2? or succinate, giving rise to different binodal (4,4)‐c nets with (4.5².8³)(4.5³.7²) ( 7 ), pts ( 8 ) topology and twofold interpenetrated binodal (5,5)‐c nets with (3².4⁴.5².6²)(3.4³.5².6⁴) ( 9 ). Therefore, the diverse conformations of the two bis (pyridyl)‐propane‐1,2‐diamines and the feature of different organic dicarboxylate can effectively influence the architectures of these polymers. Powder X‐ray diffraction patterns demonstrate that these bulk solid polymers are pure phase. TG analyses indicate that these polymers have certain thermal stability. Luminescent investigation reveals that the emission maximum of these polymers varies from 402 to 449 nm in the solid state at room temperature. Moreover, 1 , 3 and 5–8 show average luminescence lifetimes from 8.81 to 16.30 ns.     

Synthesis and Absorption Properties of Some 4-Thioaryl-1,8-naphthalimides and 4-Thioaryl-7H-benzimidazo-[2,1-a]-benz-[d,c]-isoquinolin-7-one Derivatives

A series of novel 4-thioaryl-1,8-naphthalimide derivatives were synthesized using 4-chloro-1,8-naphthalic anhydrid and arylthioles as starting materials. 4-thioaryl-1,8-naphthalic anhydride was treated with different primary amines and o-phenylene diamine or 1,2-diaminoethene to produce 4-thioaryl-1,8-naphthalimides and 4-thioaryl-7 H-benzimidazo-[2,1-a]-benz-[d,c]-isoquinolin-7-one derivatives, respectively. The UV/VIS absorption properties are discussed.     

Polyazomethines Bearing Furan Moieties. Solution Polycondensation of Bis(furanic diamine)s and Aromatic Dialdehydes

A series of new polyazomethines containing furan moieties was synthesized by polycondensation of bifuranic diamine monomers with commercially available aromatic dialdehydes viz., terephthaldehyde (TPA), isophthaldehyde (IPA). Inherent viscosities and number average molecular weights of polyazomethines were in the range 0.90–1.56 dL/g and 10460–17850 (SEC, polystyrene standard), respectively indicating formation of medium to reasonably high molecular weight polymers. The resulting polyazomethines were characterized by solubility tests, viscosity measurements, FTIR, NMR, UV spectroscopy, differential scanning calorimetric (DSC), and thermogravimetric analysis (TGA). These furan-based polyazomethines were essentially amorphous and exhibited glass transition temperatures (Tg) in the 150–190°C range. The temperature at 10% wt loss (T₁₀), determined from TGA of polyazomethines were in the range 300–380°C, indicating their good thermal stability.     

EDTA辅助水热法制备性能优异的棒状LiFePO4/C材料

以乙二胺四乙酸为配位剂采用水热法制备了棒状LiFePO₄/C材料。采用X射线衍射、扫描电镜、透射电镜、循环伏安、交流阻抗和恒电流充放电测试等对材料进行表征。结果表明:乙二胺四乙酸对材料的形貌和电性能均有很大影响。通过加入乙二胺四乙酸, 材料的形貌由不规则的颗粒变为棒状的颗粒且颗粒的厚度由140~200 nm减少至40~90 nm, 材料的表面包覆约3.5 nm的均匀碳层, 且该材料极化较小且界面阻抗较低。0.1C放电比容量为167 mAh·g^-1(接近理论容量170 mAh·g^-1)。     

A Simple and Convenient One-Pot Synthesis of Benzimidazole Derivatives Using Cobalt(II) Chloride Hexahydrate as Catalyst

A simple and efficient method for the convenient synthesis of 2-arylbenzimidazole has been described on reaction with o-phenylenediamine and various aromatic aldehydes using cobalt(II) chloride hexahydrate as a catalyst. The method is cost-effective, high-yielding, clean, and selective.     

Convenient Preparation of Hydroxymethyl-Substituted Diaminodiphenyloxybenzenes

Two hydroxymethyl-substituted monomers of diaminodiphenyloxybenzene were synthesized in three or four steps in 95% and 74% overall yields, respectively.