在WBEPM理论下EuⅠ原子里德堡能级计算(英文)

依据最弱受约束电子势模型理论,计算了铕原子4f76snd6D9/2(n≥13)、4f76snd8D9/2(n≥17)、4f76snd8D5/2(n≥15)和4f76snd8D3/2(n≥21)里德堡系列能级.计算结果与实验值的最大相对误差为4×10-5,最大绝对误差是1.91cm-1,达到了较高精度,这表明文中的外推数据是可信的.     

湍流大气中光波闪烁的圆环孔径平均因子

利用弱起伏条件下球面波在大气湍流中传输的光强起伏(闪烁)理论和圆环孔径滤波函数,获得了圆环孔径平均因子的精确表达式。将圆环孔径平均因子关于一个无量纲参量(孔径半径与菲涅耳尺度的比值)拟合成2阶多项式,再找出多项式系数与孔径内外径之比的函数关系,获得了圆环孔径平均因子关于该参量和孔径内外径之比的函数关系式。通过误差分析确定了拟合关系式的适用范围,在此范围内,拟合式与精确式的相对误差小于25%。分别用Tatarskii谱和修正Hill谱分析了湍流内尺度对圆环孔径平均因子的影响,结果显示:在其他条件不变的情况下,内尺度越大,孔径平均效应相对越小。     

A robust adaptive hybrid feedback cancellation scheme for hearing aids in the presence of outliers

It has been demonstrated that the Filtered-x Wilcoxon LMS (FxWLMS) based adaptive filter mitigates the effect of the outliers acquired by the microphone signal of hearing aids by minimizing the Wilcoxon norm and hence shows better cancellation performance than the existing Filtered-x LMS (FxLMS) algorithm. The prediction error method based adaptive feedback canceller (PEMAFC) reduces the bias present in the estimate of the feedback path due to the continuous adaptive filtering (CAF). However, the impulse response of the measured feedback path is close to zero for the first many samples due to the delay introduced by ADC converters and then contains few significant values, which results in slow convergence rate when an adaptive filter is used to model the same. To overcome this limitation, we propose a proportionate normalized WLMS (PNWLMS) algorithm based PEMAFC (P-PNWLMS) for feedback cancellation in hearing aid in the presence of outliers. Further, with an objective to improve the convergence rate and performance accuracy simultaneously, this paper proposes a novel convex PNWLMS (CPNWLMS) algorithm which incorporates convex combination of PNWLMS and WLMS algorithms. The weight update equations are derived for PEMAFC trained by PNWLMS (P-PNWLMS) and CPNWLMS (P-CPNWLMS) algorithms respectively. The results of the simulation study show improved performance of the proposed CPNWLMS based adaptive filter over its component filters.     

可接入射频半实物的试验数据转换系统设计与实现

试验环节是产品研制生命周期中的重要环节,但是一直以来都缺乏有效的管理手段,在整个测试阶段都存在大量的人为的、重复性的工作,导致试验效率低下,为改善这一现状,提高试验效率,提出了一种基于PXIe数据采集系统,借助LabVIEW和DIAdem软件的测试系统解决方案：以LabVIEW控制数据高速同步采集,DIAdem调用LabVIEW模块执行算法分析,通过软件集成,实现对测试系统的全面管理,包括数据采集、数据检索、数据分析、报表生成及整个流程的自动化控制。本文以C919飞机电源测试系统为介绍对象,对该套测试系统解决方案进行阐述,实际测试情况表明,在数据吞吐率大于200M/S的情况下,相对传统测试方法,该测试方案在保证测试精度的基础上,极大的提高了试验效率,极大的提高了系统的可扩展性和可维护性。     

应用数据挖掘的束流状态描述建模

聚类分析是描述数据群体特征的有效方法.然而,随着挖掘数据库规模的增大,评分函数极值搜索是计算复杂度很高的问题.文中提出了一种新的算法,并将其运用到束流状态描述建模中.试验结果表明,该算法快速有效.同时,重复性是电子储存环的重要指标,聚类模型可作为机器研究和决策的依据,具有指导意义.     

干涉型光纤传感器相位生成载波解调方法改进与研究

提出了基于干涉型光纤传感器的相位生成载波解调方法（PGC）的改进方法,通过算法上的改进和增加抗混叠滤波器,有效地改善了解调结果,并大大降低了系统的采样频率,结论对设计干涉型光纤传感器解调系统有重要的参考意义     

聚甲基丙烯酸甲酯掺杂Ce3+的飞秒激光三维信息存储

用飞秒激光(200 fs,1 kHz,800 nm)脉冲在掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯(PMMA)膜中进行了光存储实验研究,包括对样品的吸收光谱、激光照射前后的电子旋转共振(Electron spin resonance,ESR)光谱的测量和讨论。结果表明掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯膜具有较低的写入阈值,有利于高速、并行的三维光存储。实验结果采用传统光学显微镜并行读出。给出了四层存储结果(点间距和层间距分别是4μm和16μm),并讨论了脉冲能量的大小对空腔尺寸的影响,进行高密度存储时,在保证读出信号灰度值足够大的情况下,应选择尽量小的激光脉冲写入能量。实验结果表明这种材料可以应用于三维光信息存储。     

对Reissner-Nordstrm-anti-de Sitter黑洞Hawking隧穿辐射的研究

在考虑粒子间的自引力相互作用后,首先采用Parikh-Wilczek的半经典隧穿方法对带电粒子与不带电粒子在Reissner-Nordstrm-anti-de Sitter黑洞视界处的隧穿辐射特征进行了研究.其次,推广复路径方法对该黑洞的辐射谱进行研究.两种方法所得的结果都支持Parikh-Wilczek的观点,即黑洞的隧穿率Bekenstein-Hawking熵变有关,真实的辐射谱不是纯热谱.     

Constraints on models with a break in the primordial power spectrum

One of the characteristics of the “Matter Bounce” scenario, an alternative to cosmological inflation for producing a scale-invariant spectrum of primordial adiabatic fluctuations on large scales, is a break in the power spectrum at a characteristic scale, below which the spectral index changes from ns=1$n_s=1$ to ns=3$n_s=3$. We study the constraints which current cosmological data place on the location of such a break, and more generally on the position of the break and the slope at length scales smaller than the break. The observational data we use include the WMAP five-year data set (WMAP5), other CMB data from BOOMERanG, CBI, VSA, and ACBAR, large-scale structure data from the Sloan Digital Sky Survey (SDSS, their luminous red galaxies sample), Type Ia Supernovae data (the “Union” compilation), and the Sloan Digital Sky Survey Lyman-α forest power spectrum (Lyα) data. We employ the Markov Chain Monte Carlo method to constrain the features in the primordial power spectrum which are motivated by the matter bounce model. We give an upper limit on the length scale where the break in the spectrum occurs.     

Strain rate effects on compressive behavior of covalently bonded CNT networks

In this study, strain rate effects on the compressive mechanical properties of randomly structured carbon nanotube (CNT) networks were examined. For this purpose, three-dimensional atomistic models of CNT networks with covalently-bonded junctions were generated. After that, molecular dynamics (MD) simulations of compressive loading were performed at five different strain rates to investigate the basic deformation characteristic mechanisms of CNT networks and determine the effect of strain rate on stress–strain curves. The simulation results showed that the strain rate of compressive loading increases, so that a higher resistance of specimens to deformation is observed. Furthermore, the local deformation characteristics of CNT segments, which are mainly driven by bending and buckling modes, and their prevalence are strongly affected by the deformation rate. It was also observed that CNT networks have superior features to metal foams such as metal matrix syntactic foams (MMSFs) and porous sintered fiber metals (PSFMs) in terms of energy absorbing capabilities.