Photovoltaic Characteristics of a Naphthylamine Derivative

Organic photovoltaic （OPV） cells were fabricated via vacuum vapor deposition with {4-[2-（3-di-cyanomethylidene-5,5-dimethylcyclohexenyl）vinyl]phenyl}di（1-naphthyl）amine （DNP-2CN） as the electron donor, and fullerene （C60） as the electron acceptor. A thin film （10 nm） of tris（8-quinolinolato）aluminum （Alq3） was adopted as the buffer layer. A device based on this DNP-2CN exhibited an open circuit voltage （Voc） of 370 mV, a short-circuit current density （Jsc） of 0.61 mAocm 2, and a white-light power conversion efficiency （ η） of 0.09% （AM1.5, 75 mW.cm^- 2）.     

New diphthalocyanine complexes of rare-earth metals based on 4,5-isopropylidenedioxyphthalonitrile

A series of the earlier unknown diphthalocyanine complexes of rare-earth metals based on 4,5-isopropylidenedioxyphthalonitrile were prepared. Their compositions and yields depend on the radius of the complexing ion. The synthesized compounds were studied by spectroscopy and electrochemical methods. The redox potentials of the complexes studied change nonlinearly with a decrease in the lanthanide ion radius. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 274—279, February, 2006.     

Cu(II)-Cu(Hg)体系在蔗糖水溶液中的电化学行为

糖及其聚合物有着重要的生理功能,研究它们的热力学性质具有重要的意义[1 5]。本文考察Cu(II)在蔗糖水溶液中的电化学行为,获得了一些重要信息。1　实验部分使用试剂均为分析纯。蔗糖(北京化学试剂总厂)在343K时真空干燥6h。LiClO4(上海化学试剂总厂)在403K时减压干燥后保存在干燥器中。硝酸铜(北京化学试剂总厂)。所用溶液均采用重量法用二次蒸馏水配制。配好的溶液测定前用通过焦性没食子酸溶液的氮气来除氧。测定温度为298±1K。极谱和伏安测定在微机电化学分析系统(LK98A型)上进行,该机由天津市兰力科化学电子高技术有限公司制…     

Detection of aniline at boron-doped diamond electrodes with cathodic stripping voltammetry

Boron-doped diamond (BDD) electrodes were used to investigate the possibility of detecting aniline by linear-sweep cathodic stripping voltammetry. It was found that the dimeric species (p-aminodiphenylamine and benzidine) formed by anodic oxidation of aniline during the accumulation period are involved in electrochemically reversible redox processes and, in acidic media, the shape of the stripping voltammetric response is suitable for aniline detection in the micromolar concentration range. The low background current of conductive diamond is an advantage compared to other electrode materials and allows a detection limit of 1 μM. Weak adsorption properties and the extreme electrochemical stability are additional advantages of BDD and it was found that, even after long-time measurements, the electrode surface can regain its initial activity by an anodic polarization in the potential region of water decomposition.     

Cathodic stripping voltammetry of trace Mn(II) at carbon film electrodes

A sensitive voltammetric method is presented for the determination of tract levels of Mn (II) using carbon film electrodes fabricated from carbon resistors of 2 Ω. Determination of manganese was made by square wave cathodic stripping voltammetry (CSV), with deposition of manganese as manganese dioxide. Chronoamperometric experiments were made to study MnO₂ nucleation and growth. As a result, it was found to be necessary to perform electrode conditioning at a more positive potential to initiate MnO₂ nucleation. Under optimised conditions the detection limit obtained was 4 nM and the relative standard deviation for eight measurements of 0.22 nM was 5.3%. Interferences from various metal ions on the response CSV of Mn(II) were investigated, namely Cd(II), Ni(II), Cu(II), Cr(VI), Pb(II), Zn(II) and Fe(II). Application to environmental samples was demonstrated.     

Synthesis and electrochemistry of Group 6 tetracarbonyl (N,N′-bis(ferrocenylmethylene)ethylenediamine)metal(0) complexes

Thermal substitution reaction of Cr(CO)₄(η^2:2-1,5-cyclooctadiene), Mo(CO)₄(η^2:2-norbornadiene), and W(CO)₅(η²-bis(trimethylsilyl)ethyne) with N,N′-bis(ferrocenylmethylene)ethylenediamine (bfeda) yields M(CO)₄(bfeda) complexes which could be isolated from the reaction solution and characterized by elemental analysis, MS, IR, and NMR spectroscopy. In the case of tungsten, W(CO)₅(bfeda) is formed as intermediate and then undergoes the ring closure reaction yielding the ultimate product W(CO)₄(bfeda). The electrochemical behavior of the M(CO)₄(bfeda) complexes was studied by using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) in dichloromethane with tetrabutylammonium tetrafluoroborate as electrolyte. Constant potential electrolysis of the complexes was performed successively at their peak potentials at 0 °C in their CH₂Cl₂ solution and the electrolysis was followed by in situ recording the electronic absorption spectra in every 5 mC. In the electrolysis of Cr(CO)₄(bfeda), the central Cr(0) is oxidized first and electrolysis continues with oxidations of two ferrocenyl groups until the end of totally three moles of electron passage per mole of complex. In the electrolysis of Mo(CO)₄(bfeda) and W(CO)₄(bfeda) the first oxidation occurs on the central atom forming a short-lived species which undergoes an intramolecular one-electron transfer and is reduced back to M(0) while one of the ferrocene units is oxidized to the ferrocenium cation at the same time. This indicates that the electron is transferred from iron to the central metal atom.     

Voltammetric Behavior of Arsenic(III) in the Presence of Sodium Diethyl Dithiocarbamate and Its Determination in Water and Highly Saline Samples by Adsorptive Stripping Voltammetry

This paper describes the voltammetric behavior of As(III) at the hanging mercury drop electrode (HMDE) in the presence of sodium diethyl dithiocarbamate (SDDC) and a new voltammetric method for the determination of As(III) at trace levels. The method is based on the adsorptive deposition of a As(III) complex with SDDC at ?0.45 V (vs. Ag/AgCl) on the HMDE in acidic medium of 0.01 mol L^?1 HCl (pH 2.0) and its cathodic stripping during the potential scan (100 mV s^?1). The linear range for the determination of As(III) in the presence of SDDC (4 μmol L^?1) in water samples was between 1 and 10 μg L^?1 for a deposition time of 300 s (r=0.994) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.999). For the determination of As(III) in dialysis concentrate samples, the linear range was between 5 and 25 μg L^?1 for a deposition time of 180 s (r=0.992) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.996). Detection limits of 0.3 and 2.2 μg L^?1 in water and dialysis concentrate samples were calculated for the method using a deposition time of 300 and 180 s, respectively. Recovery values between 93.0 and 110.0% for As(III) added to deionized, mineral, seawater (synthetic and real) and dialysis concentrate samples prove the satisfactory accuracy and applicability of the procedure.     

Voltammetric determination of hafnium with calconcarboxylic acid

The interaction of Hf(IV) with calconcarboxylic acid (1-(2-hydroxy-4-sulfo-1-naphtylazo)-3-naphtolic acid) was investigated by cyclic voltammetry varying various factors (pH, ionic strength, contents of ethanol and scan rate). Optimal conditions of Hf(IV) determination in the presence of calconcarboxylic acid were found: acetic buffer solution pH 2.6, scan rate 0.5 Vs⁻¹. The detection limit of Hf(IV) concentration was 2.46 × 10⁻⁷ mol L⁻¹. The influence of foreign ions on the Hf(IV) determination was studied. It was established that some metals like cadmium, nickel, zinc, copper and titanium could be determined with Hf(IV) simultaneously. The method of voltammetric determination of hafnium was tested on model solutions and used in the determination of Hf(IV) in terbium-base alloy.     

Solid-phase synthesis of the cyclic lipononadepsipeptide [N-Mst(Ser1), d-Ser4, L-Thr6, L-Asp8, L-Thr9]syringotoxin

An optimized solid-phase strategy for the preparation of the cyclic lipononadepsipeptide [N-Mst(L-Ser1), D-Ser4, L-Thr6, L-Asp8, L-Thr9]syringotoxin is reported. The strategy is based on the use of a mild orthogonal protection scheme and the incorporation of the nonproteinogenic amino acid (Z)-Dhb into the peptide chain as the dipeptide Fmoc-Thr(tBu)-(Z)-Dhb-OH. The didehydrodipeptide was synthesized by a water-soluble carbodiimide-induced beta-elimination of a protected dipeptide containing a residue of Thr with its free hydroxy side chain unprotected.     

Spectroelectrochemical Measurements at Colloidal Au Multilayer Optically Transparent Electrodes

Application of thin colloidal Au multilayers on glass substrates as optically transparent electrodes is reported herein. Evaluation of the electrode by scanning electron microscopy and as an optically transparent thin layer electrode (OTTLE) illustrate its use for spectroelectrochemical applications. A spectroelectrochemical Nernst plot acquired for the oxidation of o‐tolidine yielded a value of E°=0.605 V (vs. Ag/AgCl) and n=1.88. Both of these values are in excellent agreement with previously published values obtained using a traditional Au minigrid OTTLE. The colloidal Au multilayer electrode is expected to offer many advantages over the minigrid OTTLE in specific applications. These advantages include direct control over microscopic surface topography, large electrochemical surface area, applicability to many different electrode geometries, and increased microscopic surface roughness for SERS and SPR applications.