利用烟草高效转化功能基因体系的建立

对农杆菌介导的烟草遗传转化条件进行探索,以20 mg/L的潮霉素作为转化苗的筛选压,稀释至OD600为O.2～O.3的农杆菌对外植体浸染15 min,于添加300 mg/L头孢霉素的生根培养基中诱导生根,可稳定获得较高的阳性转化率.经PCR和PCR-Souttlern检测,阳性转基因植株达84.8%以上.通过本研究建立了一种稳定高效的功能基因烟草遗传转化体系.     

Suspension culture in a T-flask with acoustic flow induced by ultrasonic irradiation

Suspension culture is an essential large-scale cell culture technique for biopharmaceutical development and regenerative medicine. To transition from monolayer culture on the culture surface of a flask to suspension culture in a bioreactor, a pre-specified cell number must first be reached. During this period of preparation for suspension culture, static suspension culture in a flask is generally performed because the medium volume is not large enough to use a paddle to circulate the medium. However, drawbacks to this static method include cell sedimentation, leading to high cell density near the bottom and resulting in oxygen and nutrient deficiencies. Here, we propose a suspension culture method with acoustic streaming induced by ultrasonic waves in a T-flask to create a more homogeneous distribution of oxygen, nutrients, and waste products during the preparation period preceding large-scale suspension culture in a bioreactor. To demonstrate the performance of the ultrasonic method, Chinese hamster ovary cells were cultured for 72 h. Results showed that, on average, the cell proliferation was improved by 40% compared with the static method. Thus, the culture time required to achieve a 1000-fold increase could be reduced by 32 h (a 14% reduction) compared with the static method. Furthermore, the ultrasonic irradiation did not compromise the metabolic activity of the cells cultured using the ultrasonic method. These results demonstrate the effectiveness of the ultrasonic method for accelerating the transition to large-scale suspension culture.     

Evaluation of a Gelatin-Modified Poly(ε-Caprolactone) Film as a Scaffold for Lung Disease

Lung transplantation is a necessary step for the patients with the end stage of chronic obstructive pulmonary disease. The use of artificial lungs is a promising alternative to natural lung transplantation which is complicated and is restricted by low organ donations. For successful lung engineering, it is important to choose the correct combination of specific biological cells and a synthetic carrier polymer. The focus of this study was to investigate the interactions of human lung epithelial cell line NCl-H292 that is involved in lung tissue development with the biodegradable poly(ε-caprolactone) before and after its chemical modification to evaluate potential for use in artificial lung formation. Also, the effect of polymer chemical modification on its mechanical and surface properties has been investigated. The poly(ε-caprolactone) surface was modified using aminolysis followed by immobilization of gelatin. The unmodified and modified polymer surfaces were characterized for roughness, tensile strength, and NCl-H292 metabolic cell activity. The results showed for the first time the possibility for NCI-H292 cells to adhere on this polymeric material. The resazurin assay showed that the metabolic activity at 24?h postseeding of 80% in the presence of the unmodified and greater than 100% in the presence of the modified polymer was observed. The roughness of the poly(ε-caprolactone) increased from 4 to 26?nm and the film strength increased from 0.01 to 0.045 kN when the material was chemically modified. The results obtained to date show potential for using modified poly(ε-caprolactone) as a scaffold for lung tissue engineering.     

Hydrogel microfluidic co‐culture device for photothermal therapy and cancer migration

We developed the photo‐crosslinkable hydrogel microfluidic co‐culture device to study photothermal therapy and cancer cell migration. To culture MCF7 human breast carcinoma cells and metastatic U87MG human glioblastoma in the microfluidic device, we used 10 w/v% gelatin methacrylate (GelMA) hydrogels as a semi‐permeable physical barrier. We demonstrated the effect of gold nanorod on photothermal therapy of cancer cells in the microfluidic co‐culture device. Interestingly, we observed that metastatic U87MG human glioblastoma largely migrated toward vascular endothelial growth factor (VEGF)‐treated GelMA hydrogel‐embedding microchannels. The main advantage of this hydrogel microfluidic co‐culture device is to simultaneously analyze the physiological migration behaviors of two cancer cells with different physiochemical motilities and study gold nanorod‐mediated photothermal therapy effect. Therefore, this hydrogel microfluidic co‐culture device could be a potentially powerful tool for photothermal therapy and cancer cell migration applications.     

结冷胶与聚乙二醇丙烯酸酯双网络凝胶的制备及生物相容性评价

针对结冷胶脆性较大的问题,将聚乙二醇丙烯酸酯(PEGDA)引入结冷胶,通过紫外交联制备了结冷胶/PEGDA双网络凝胶,并对单组分凝胶和双网络凝胶的溶胀性能、微观形貌、拉伸力学性能、动态压缩性能和流变性能等进行比较.结果表明,双网络凝胶在类生理环境中具有较小的溶胀率和较好的尺寸稳定性,PEGDA的引入能够大幅度提高结冷胶的韧性,双网络凝胶的拉断伸长率可达340%,断裂能达1.01×103J/m2,与天然关节软骨相当.将成纤维细胞种植在凝胶内部进行体外三维立体培养,结果显示,细胞在凝胶内部生存状态良好,双网络凝胶的细胞负载率高于单网络结冷胶,说明该体系在生物医用领域具有良好的应用前景.     

Biodegradation-induced surface change of polymer microspheres and its influence on cell growth

Biodegradable microspheres were fabricated by poly(?-caprolactone) (PCL) homopolymer and poly(?-caprolactone-b-ethylene oxide) (PCL-b-PEO) amphiphilic block copolymer. The regulation of microsphere surface morphology was successfully achieved by controlled enzymatic degradation. The morphological changes induced by biodegradation and their influences on the growth of MG-63 human osteosarcoma cells were studied. Results based on the evaluation of cytotoxicity and the morphological observation of MG-63 cells cultivated on microspheres showed better growth of cells on the surface of degraded microspheres than on the surface of those undegraded microspheres no matter they were fabricated by homopolymers or copolymers. The influences of morphological changes of microsphere surface before and after biodegradation on MG-63 cell growth were discussed. The results of this work indicated that the biodegradation-induced morphological changes of microspheres could be well controlled and were favorable for MG-63 cell attachment and proliferation.     

X-ray and scanning electron microscopy archaeometric studies of pigments from the Aguada culture, Argentina

X-ray diffraction (XRD) and scanning electron microscopy (SEM) with energy-dispersive system (EDX) were used in order to obtain mineralogical and chemical composition of white and reddish pigments belonging to the Ambato style of “Aguada” culture, found in the archaeological site of Piedras Blancas (Catamarca, Argentina 500–1100 AD). These pigments are associated with different sectors, two of them being related to funerary context. Due the scarce amount of samples available, it was necessary to develop a new methodology for their study. X-ray diffraction spectra were collected using a low background Si sample holder, which allows the study of small sample amounts (a few milligrams). The mineral quantifications were carried out by applying the Rietveld method to the XRD spectra. The major difficulties arose for reddish pigments, since they contain iron-bearing phases, such as ferruginous clays, in which neither the concentration of Fe^{+ 2} relative to Fe^{+ 3} nor the location in the lattice (occupancy factor) is completely known. With the aim of performing quantitative elemental analysis from SEM-EDX spectra, a special sample holder for the small amounts of available samples was developed. Commercial standards were used in the quantification process and the characteristic intensities were corrected for matrix effects. Micrographs and EDX point spectra allowed the characterization of minor phases and particle analysis. The Rietveld method combined with the new procedure for EDX analysis has proven to be a suitable method for routine quantitative analysis of small amounts of archaeological pigments.     

Evaluation of isotope-coded protein labeling (ICPL) in the quantitative analysis of complex proteomes

An evaluation of the ICPL (isotope-coded protein labeling) non-isobaric labeling technique was performed using two different biological models. Two samples containing phage T4 capsids were mixed in a 1:1 ratio after being labeled with the light or heavy versions of the ICPL reagent. The analysis of this proteome demonstrated the feasibility of this approach for differential quantitative proteomics and was employed to optimize the experimental parameters of the ICPL workflow. ICPL-mediated analysis of two more complex proteomes, those of a Salmonella enterica serovar Typhimurium virulent strain and an isogenic attenuated mutant, and its comparison with the results obtained in a 2D-PAGE “classical” approach confirmed that ICPL is a valuable alternative to other labeling techniques currently in use. In addition, our results suggest that labeling at the peptide level instead of following the standard ICPL workflow should increase both the number of proteins quantified and the reliability of the quantification.     

Astronomical function and date of the Taosi observatory

The Taosi site in Xiangfen County, Shanxi Province, may be the capital of the King Yao. Archeologists recently discovered a large semi-circular stamped-earth platform, II FJT1, which has a clear and definite pounded-earth central core together with a curved wall perforated by twelve gaps. The platform is said to be an ancient observatory used to determine the seasons by watching the sunrise. Each feature of II FJT1 was precisely measured and the data are reproduced in this paper. An astronomical analysis of slots E2 and E12 was carried out using the azimuths of the slots’ centerlines and the vertical angle of the mountain ridge opposite, above which the sun rises. The results show that at present the sun is close to the two slots but does not exactly enter them at summer and winter solstice sunrise. Using 14C analysis archeologists dated the site to about 2100 BC. Because of the secular change in the obliquity of the ecliptic, at that date on the summer solstice the half-risen sun would have appeared inside slot E12 just to the right of the centerline, and on the winter solstice the sun would have been exactly on the centerline of slot E2. This result provides compelling proof that II FJT1 is an ancient observatory.     

丁酸钠预培养对水稻花药绿苗形成的影响

对水稻花药进行了丁酸钠预培养的试验,结果表明:2mM丁酸钠24小时的预处理,可以促进小孢子的均等分裂,增加多核花粉的比例,并影响愈伤组织诱导率和愈伤组织的分化绿苗潜力,对愈伤组织分化绿苗的促进作用尤其显著。丁酸钠对愈伤组织诱导的作用,与介质的pH的值有关,pH7.0的培养基的诱导率低于pH5.8,但对分化有利。 文章讨论了丁酸钠促进愈防组织分化的可能原因,以及丁酸钠影响愈伤组织诱导和促进分化之间关系。