丙烯酸甲酯/4-丙烯酰胺基-2,2,6,6-四甲基哌啶光共聚合体系的竞聚率和序列分布研究

以丙烯酸甲酯(MA,M1)和4-丙烯酰胺基-2,2,6,6-四甲基哌啶(AATP,M2)溶液光共聚合体系为研究对象,采用1H-NMR手段测定了MA/AATP共聚物的组成,用Mayo-Lewis积分法和扩展Kelen-Tüdos方法计算的竞聚率分别为0.88相似文献   

Asymmetric polymerization using C1 resources

Two examples of asymmetric alternating copolymerization, (1) the alternating copolymerization of α‐olefins (monosubstituted ethenes) with carbon monoxide and (2) the alternating copolymerization of meso‐epoxide with carbon dioxide, are described, and the meaning of chirality in polymer synthesis is emphasized. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 215–221, 2004     

AN/St悬浮共聚体系中AN在水/油两相间分配及其对共聚物组成的影响

研究了丙烯腈/苯乙烯(AN/St)悬浮共聚体系中AN在水/油两相间的分配及其对AN/St共聚物组成的影响.结果表明,AN分配于水/油两相间,使油相AN的含量低于相同单体配料比的本体聚合,导致生成的AN/St共聚物组成偏离本体共聚.为了准确预测进而控制AN/St悬浮共聚物的组成,提出了在考虑AN相分配的基础上计算AN/St悬浮共聚物组成的模型.计算结果与实验值一致,计算中用到的油相实际竞聚率与本体聚合相同,但该悬浮聚合的表观竞聚率随水/油比的变化而发生较大改变.     

Preparation and characterization of functional group gradient surfaces

Functional group gradient surfaces where the density of functional groups changes gradually along the sample length were prepared. The functional group (? COOH, ? CONH₂, and ? OH group) gradient surfaces were produced by the treatment of low-density PE sheets using a corona with gradually increasing power, followed by the graft copolymerization of acrylic acid and subsequent substitution reaction of carboxylic acid groups to amide or hydroxyl groups. The prepared gradient surfaces were characterized by the measurement of water contact angle, FTIR-ATR, and ESCA. The gradient surfaces prepared can be used to systematically investigate the interactions of biological or other species in terms of the surface functional groups and their density of polymeric materials. © 1994 John Wiley & Sons, Inc.     

Multimonomer partitioning in latex systems with moderately water-soluble monomers

Simple equations describing monomer partitioning in latices during intervals 2 and 3 in emulsion polymerization with any number of low to moderately water soluble monomers were derived from the extended Morton equation by making various assumptions. It appears that it is mainly the combinatorial entropy of mixing that governs the partitioning behavior, and that other contributions to the free energy of the monomers in the polymer particles are marginal. Experimental results with styrene, methyl methacrylate, and methyl acrylate confirm the validity of the assumptions. In interval 3 of emulsion polymerization the sum of all contributions to the free energy of the monomers in the particles other than the combinatorial entropy of mixing can be taken as a constant that is dependent only on the monomer composition in the particles and independent of the degree of swelling of the particles. The only parameters one needs to know to calculate the monomer concentrations in all phases with help of the derived equations, are the saturation concentrations of each monomer in the polymer particles, and the saturation concentrations of each monomer in the aqueous phase. © 1994 John Wiley & Sons, Inc.     

Diallylacylhydrazines as monomers for polyfunctional water-soluble polymers

Allylation of acetohydrazide afforded the corresponding diallylacylhydrazine, which can be used for syntheses of water-soluble polyfunctional polymers.     

甲壳胺接枝聚合反应的研究

本文是以过硫酸钾为引发剂，研究甲基丙烯酸甲酯（ＭＭＡ）与甲壳胺的接枝聚合反应．通过对不同脱乙酰度（ｄａ）甲壳胺（ＣＴＳ）的接枝聚合反应条件实验，研究了反应时间，温度，引发剂浓度和单体浓度对接枝聚合反应的影响，从中得到优选的反应条件．在相同条件下，比较不同脱乙酰度甲壳胺及Ｎ－取代甲壳胺的接枝聚合反应结果，表明：甲壳胺中氨基参与了接枝聚合反应的引发过程．     

壳多糖与丙烯酸丁酯的乳液接枝共聚研究

以十二烷基苯磺酸钠为乳化剂，过硫酸钾－亚硫酸氢钠为引发剂，研究了壳多糖与丙烯酸丁醋的乳液共聚合，结果表明当［Ｋ２Ｓ２Ｏ８］＝［ＮａＨＳＯ３］＝２．５７×１０－３ｍｏｌ·１－１，［ＢＡ］＝０．６８ｍｏｌ．１－１，［Ｃｈｉｔｏｓａｎ］＝１９．２ｇ·ｌ－１，在７０℃下反应５小时，共聚反应的接技率和接枝效率均较高．用红外光谱，差热分析，Ｘ射线衍射，扫描电镜对接技共聚物进行了表征，此外测试了共聚物胶乳成膜的机械性能，表明用丙烯酸丁酯对壳多糖进行接枝改性，可提高壳多糖的韧性，扩大其应用范围．     

利用大分子单体技术合成接枝共聚物

大分子单体和小分子共单体共聚是合成接枝共聚物的重要途径之一。本文综述了大分子单体通过各种聚合方式(自由基共聚、离子型共聚、配位共聚、基团转移共聚和逐步共聚)和普通小分子单体的共聚反应,详细讨论了大分子单体和小分子单体的自由基共聚反应动力学,并简要介绍了接枝共聚物的应用背景。     

Synthesis of saccharidic polymer colloids via free radical mini‐emulsion polymerization

Polymer colloids based on 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG) and butyl acrylate (BA) were prepared via free radical mini‐emulsion polymerization. The kinetic and colloidal features of the copolymerization were investigated. The final particle size (D) of the sugar latexes is inversely proportional to the concentration of the anionic emulsifier (sodium dodecyl sulphate, SDS) and the non‐ionic one (alkyl polyglucoside, APG). It was also found that D is independent of the concentration of either the water‐soluble initiator (potassium persulfate, KPS), or the oil‐soluble initiator (2,2′‐azobisisobutyronitrile, AIBN). The rate of mini‐emulsion polymerization is lower in comparison with the conventional emulsion polymerization under the same conditions. The polymerization rate (R_p) and the total number of particles (N_p) are proportional to the 0.72th and 0.93th power of the SDS, and to the 1.40th and 2.22th of the APG concentration. Following reaction orders, 0.79/0.06 were obtained for R_p/N_p versus the concentration of KPS, and 0.22/?0.01 for AIBN, respectively. Copyright © 2004 John Wiley & Sons, Ltd.