On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering

This paper describes the influence of dynamic tension/compression loading on notched and unnotched nylon specimens fabricated by Injection Molding (IM) and Selective Laser Sintering (SLS). The main objective of this work is to analyze and describe the differences in material structure and fatigue properties of as-built nylon parts produced by IM and SLM from the same polyamide 12 powder. The differences in dimensional quality, density, surface roughness, crystal structure and crystallinity are systematically measured and linked to the mechanical fatigue properties. The fatigue properties of the unnotched SLS specimens are found to be equal to those of the unnotched IM specimens. The presence of pores in the sintered samples does not lead to rapid failure, and the microvoid coalescence failure mechanism is delayed. The notched specimens show more brittle failure and increased fatigue resistance which is caused by local notch-strengthening. The results enable improved understanding of the difference in material structure and fatigue behavior of selective laser sintered and injection molded polyamide.     

Application of Polyglycerol Diisostearate Ethoxylates in Microemulsion

Effect of surfactants [polyglycerol diisostearate ethoxylates (PGDIS-E31, PGDIS-E36 and PGDIS-E40) and Tween-80], alcohols (1,2-propandiol, ethanol, 1-propanol, 1-butanol, 2-butanol and 1-pentanol), oils [isopropyl palmitate (IPP), isooctyl palmitate (IOP), dioctyl carbonate (DOC), and dioctyl hexanediate (DOH)], temperature and sodium chloride on the microemulsion formation of the surfactant/alcohol/oil/water system has been investigated by the pseudo-ternary phase diagrams. The capacities of the four surfactants in the microemulsion formation of the surfactant/alcohol/IPP/water system at surfactant/alcohol of 2:1 are in the order of PGDIS-E31 > PGDIS-E36 > Tween-80 > PGDIS-E40, whatever alcohol (ethanol, 1-propanol, and 1-butanol) is used. PGDIS-E31 and 1-butanol exhibit best synergism in the microemulsion formation. In addition, the volume, structure and polarity of oil all influence the microemulsion formation. At the optimum weight ratio 2:1 of PGDIS-E31/1-butanol, the microemulsion region of the PGDIS-E31/1-butanol/IPP/water system is the largest among the studied systems. The microemulsion system of PGDIS-E31/1-butanol/IPP/water is not sensitive to lower temperature such as 40°C. It is also not sensitive to sodium chloride when the concentration of sodium chloride is in the range of 0 to 1.0%.     

Phase Behavior of Bicontinuous and Water/Diesel Fuel Microemulsions Using Nonionic Surfactants Combined with Hydrophilic Alcohol Ethoxylates

Bicontinuous and water-in-diesel microemulsions were formulated using single nonionic alkyl poly glycol ethers combined with hydrophilic alcohol ethoxylates. The phase behavior at temperatures ranging from 0°C to 50°C was investigated. Visual inspection as well as cross-polarizers were used to detect anisotropy. The fish phase diagrams were determined. The presence of the hydrophilic alcohol ethoxylates was necessary to initiate both types of microemulsions. Increasing the hydrophobic chain length of the surfactant led to a wider range of temperature stability at lower surfactant concentration. Meanwhile, increasing the ethylene oxide units in the headgroup by two units led to a phase diagram that is dominated by lyotropic liquid crystal. The formulated water in diesel microemulsions were tested experimentally in a 4-cylinder diesel engine. From this it is observed that the emissions of NO_x, soot, and CO₂ were reduced substantially compared to neat diesel, while for the CO the reduction occurs just at low load.      

Phase Behavior of Diglycerol Monomyristate in Different Nonpolar Organic Solvent Systems

We have investigated the phase behavior of diglycerol monomyristate (DGM) in a variety of organic solvents over a wide range of temperatures and compositions. At lower temperature, there exists a surfactant solid, which solubilize different amounts of oils depending on the oil nature. The melting temperature of the solid phase is virtually constant in a wide range of composition. In all the systems, a lamellar liquid crystal (L_α) is formed in surfactant‐rich regions at intermediate temperatures between the solid‐melt and isotropic two‐ or single‐phase regions. In the dilute regions reverse vesicles are formed in the L_α+O regions mainly in the case of linear hydrocarbon type oils. In the aromatic and cyclic aliphatic oils, there are isotropic solutions at 25°C. However, there is dispersion of α‐solid in the case of liner hydrocarbon oils. Two liquid‐phase regions above the L_α phase are observed in the case of tetradecane and hexadecane. In the shorter chain oil systems, such as octane and decane, no two liquid‐phase appear above L_α region. That is the two liquid‐phase region is largely dependent on the chain length of the oils, and becomes wider in longer hydrocarbon oil.     

MULTIPLE EMULSIONS STABILIZED BY COLLOIDAL MICROGRYSTALLINE CELLULOSE

Multiple emulsions stabilized by colloidal microcrystalline cellulose (CMCC, Avicel RC591) at the w/o and o/w interfaces, and by the addition of Span 80 or Span 85 at the w/o interface, were studied by means of brightfield microscopy, freeze-etch electron microscopy, droplet size distribution analysis and rheologic measurements. Stable multiple emulsions were prepared by incorporation of sodium chloride in the innermost aqueous phase, thereby creating an osmotic gradient preventing loss of the inner aqueous phase to the external aqueous phase. Freeze-etch electron microscopy of the multiple emulsions indicated the presence of a network of microcrystalline cellulose at the outer o/w interface. It may be assumed that the surfactant directly stabilized the w/o interface by adsorption at the interface, as well as indirectly by facilitating wetting of the microcrystalline cellulose by the oil. From rheologic measurements, the existence of a three-dimensional network in the external aqueous phase was indicated by the considerable degrees of thlxotropy and significant static yield values of these multiple emulsions.     

Analytical application of the poly(1H-1,2,4-triazole-3-thiol) modified gold electrode for high-sensitive voltammetric determination of catechol in tap and lake water samples

ABSTRACT

In this work, a simple, sensitive and rapid method for the determination of trace amounts of catechol (CT) in aqueous media has been suggested. For this purpose, poly(1H-1,2,4-triazole-3-thiol) film was electrochemically deposited successfully at the gold electrode (Au/T3T). The electrochemical behaviour of CT was studied on the Au/T3T electrode by the cyclic voltammetry and differential pulse voltammetry techniques. The anodic peak current value and the concentration of CT showed a good linear relationship in the range of 0.015–2.8 µM. The limit of detection was found as 1.88 nM (S/N = 3). Besides, the reproducibility, repeatability, stability and interference measurements were also assayed. This sensor was applied successfully for the detection of CT in synthetic and real samples.     

NIR-SERS studies of DNA and DNA bases attached on polyvinyl alcohol (PVA) protected silver grass-like nanostructures

In this work, polyvinyl alcohol (PVA) protected silver grass-like nanostructure (PVA–Ag–GNS) with near infrared surface-enhanced Raman scattering (NIR-SERS) activity was prepared and employed to detect DNA and DNA bases. The PVA–Ag–GNS demonstrated high NIR-SERS activity and good optical reproducibility in the detection of adsorbates such as the case of crystal violet, DNA and DNA bases. By using of the tested molecule of thymine, the PVA–Ag–GNS shows a high enhancement factor (EF) of ∼10⁸. For NIR-SERS detection of DNA molecules, Raman signals from the DNA bases of guanine (630 cm⁻¹) and adenine (720 cm⁻¹) are greatly enhanced. For DNA molecules NIR-SERS detection, Raman signals from the DNA bases of guanine (630 cm⁻¹), adenine (720 cm⁻¹) and cytosine (1010 cm⁻¹) are greatly enhanced. The experimental results show that the NIR-SERS spectrum of DNA is dominated by guanine mode, which is followed by adenine and cytosine modes, respectively. Meanwhile, the NIR-SERS signal intensities of the DNA bases increase in the order of thymine (T) < cytosine (C) < adenine (A) < guanine (G). One can conclude that the adsorption strength of the DNA bases in DNA molecule with the silver surface is in the order T < C < A < G, which is different from that of the four DNA bases in individual molecule adsorbed on silver surface (T < A < G < C). On the other hand, the geometry optimization and calculated wavenumber of the complexes of adenine–Ag, guanine–Ag, cytosine–Ag and thymine–Ag for the ground states are performed with DFT, B3LYP functional and the LanL2DZ basis set. The calculated wavenumbers match well with the experimental results. According to our experiment and calculations, DNA base molecules adsorbed on silver surface via the intra-annular nitrogen atom which is adsorbed on the silver nanoparticle and formed metal–molecule complexes by the available lone pair.     

Substrate interaction effects on order to disorder transition behavior in block copolymer films

We present an overview of the recent progress on the phase transition in the block copolymer (BCP) films in terms of the interfacial interactions effects of the substrates and the χ (Flory-Huggins segmental interaction parameter) effects between the two blocks. For the BCP films thinner than a critical thickness (L_c) above which the transition is independent of film thickness, the order-to-disorder transition (ODT) increased or decreased with decreasing film thickness depending on the interfacial interaction types. The rapid and slow changes in the ODT were attributed to the relative magnitude of enthalpic contribution to χ between two blocks. Interestingly, a periodic amplification in the block composition for the BCP films suppressed the compositional fluctuation in the film geometry, resulting in the ODT shifts from the bulk ODTs above L_c. This effect of the BCP films was more illustrated by the ODT shift effects depending on the strength of the preferential interactions on the substrates. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Investigation of Electron Behavior in Nano‐TiO2 Photocatalysis by Using In Situ Open‐Circuit Voltage and Photoconductivity Measurements

The in situ open‐circuit voltages (V_oc) and the in situ photoconductivities have been measured to study electron behavior in photocatalysis and its effect on the photocatalytic oxidation of methanol. It was observed that electron injection to the conduction band (CB) of TiO₂ under light illumination during photocatalysis includes two sources: from the valence band (VB) of TiO₂ and from the methanol molecule. The electron injection from methanol to TiO₂ is slower than that directly from the VB, which indicates that the adsorption mode of methanol on the TiO₂ surface can change between dark and illuminated states. The electron injection from methanol to the CB of TiO₂ leads to the upshift of the Fermi level of electrons in TiO₂, which is the thermodynamic driving force of photocatalytic oxidation. It was also found that the charge state of nano‐TiO₂ is continuously changing during photocatalysis as electrons are injected from methanol to TiO₂. Combined with the apparent Langmuir–Hinshelwood kinetic model, the relation between photocatalytic kinetics and electrons in the TiO₂ CB was developed and verified experimentally. The photocatalytic rate constant is the variation of the Fermi level with time, based on which a new method was developed to calculate the photocatalytic kinetic rate constant by monitoring the change of V_oc with time during photocatalysis.     

支化侧链偶氮无规共聚物中空和类囊泡聚集体研究

研究了支化侧链型偶氮无规共聚物(PMAPB6P-AA)在THF/H2O混合溶液中的自组装行为.研究发现,通过缓慢增加体系的水含量,可以制备出具有中空结构的非球形聚集体.调节聚合物的初始浓度,可以得到不同粒径的聚集体.聚集体中偶氮生色团的光致异构化速率与异构化程度随聚合物初始浓度的增大而减小.在此基础上,采用更加缓慢的增加水含量的方法,使聚合物分子进行充分的疏水聚集与H-聚集,制备出类囊泡状聚集体.在紫外光照射条件下,观察到类囊泡聚集体发生了光致解聚集.