Trigonal-planare CuX3-Gruppen in Cu2Mo6X14, X = Cl,Br, I

Trigonal Planar CuX₃-Groups in Cu₂Mo₆X₁₄, X = Cl, Br, I Cu₂Mo₆Cl₁₄ (I), Cu₂Mo₆Br₁₄ (II) and Cu₂Mo₆I₁₄ (III) were synthesized by thermal treatment of corresponding mixtures of copper(I) and molybdenum(II) halides. The crystal structures were determined by single crystal X-ray analyses. I and II show isotypism, cubic, Pn3 (no. 201, sec. setting), Z = 4, I: a = 12.772(3) Å, II: a = 13.350(2) Å. III shows a new structural type, orthorhombic, Pbca (No. 61), Z = 4, a = 16.058(3) Å, b = 10.643(2) Å, c = 16.963(3) Å. Trigonal planar CuX₃ units were found in I? III. Structural behaviour relations are discussed, especially with regard to ionic conductivity.     

Identification of micro-scale calorimetric devices II

The miniaturized calorimetric devices furnish a reduced working flat surface and permits measurements with extremely low-mass quantities. The experimental sensitivity shows relevant position dependence with x-y surface coordinates and with z-distance. The device identification is realized via a 2-D model based in Fourier general equation. Using the Marquardt method the experimental flat surface device can be identified and the fitted parameters used to simulate the behavior of the experimental system. From the model, the effects of several dissipation configurations can be evaluated. Also, via the RC-analogy, a way to 3-D experimental devices is roughly described. This revised version was published online in July 2006 with corrections to the Cover Date.     

Photochemical Ionic-Conductivity Switching Systems of Photochromic Crown Ethers for Information Technology

Design of two types of ion-conducting systems using photochromic crown ethers as the photocontrol agents is described; one type is based on the phase transition of azobenzene derivatives induced by their photoisomerization and the other based on the molecular control of metal ion complexation by crowned spirobenzopyrans. The photoresponsive ion-conducting systems are applicable to electrostatic imaging and photorefractive materials.     

Heat conduction, convection and radiolysis of the

Kinetic parameters of amino acid cations in an MK-40 ion-exchange membrane are calculated from the conductivity data. A theoretical quantum-chemical analysis of experimental activation energies for conduction suggests a mechanism of elementary act of transport of amino acid cations in the membrane.     

Kinetic Parameters of Ion-Exchange Membrane in Amino Acid Solutions

Kinetic parameters of amino acid cations in an MK-40 ion-exchange membrane are calculated from the conductivity data. A theoretical quantum-chemical analysis of experimental activation energies for conduction suggests a mechanism of elementary act of transport of amino acid cations in the membrane.     

Ionic Mobility, Phase Transitions, and Superionic Conduction in Solid Solutions (100 ? x)PbF2-xZrF4 and Crystals K2ZrF6, (NH4)2ZrF6, KSnZrF7, and M(NH4)6Zr4F23 (M = Li, Na)

Methods of (¹⁹F, ¹H) NMR and impedance spectroscopy are used to investigate the internal mobility and ionic conduction in solid solutions arising in the system PbF₂-ZrF₄ and polycrystals KSnZrF₇, Li(Na)(NH₄)₆Zr₄F₂₃, and M₂ZrF₆ (M = K, NH₄). Factors responsible for the form of ionic motions and their energetics at 170–550 K are considered. It is established that the phase transitions in these compounds are connected with the crystal transition to a superionic state and that the high ionic (superionic) conductivity of beta phases is due to the diffusion of fluoride ions, ammonium cations, and possibly alkali metal cations. The obtained data testify to a substantial role of chainlike aggregation of anionic groupings and a variableness of structural mechanisms of formation of such chains in fluorozirconates for the development of translational diffusion in these compounds.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 573–582.Original Russian Text Copyright © 2005 by Kavun, Uvarov, Slobodyuk, Goncharuk, Kotenkov, Tkachenko, Gerasimenko, Sergienko.     

Proton conductive polyimide ionomer membranes: Effect of NH,OH, and COOH groups

A new series of sulfonated polyimide (SPI) copolymers containing NH, OH, or COOH groups were synthesized by the polycondensation of 1,4,5,8‐naphthalnetetracarboxylic dianhydride, 3,3′‐bis(sulfopropoxy)‐4,4′‐diaminobiphenyl, and 3‐(4‐aminophenyl)‐5‐(3‐aminophenyl)‐1H‐1,2,4‐triazole (SPI‐8‐m), 3,5‐bis(4‐aminophenyl)‐1H‐1,2,4‐triazole (SPI‐8‐p), 3,6‐diaminocarbazole (SPI‐9), 3,5‐diamino‐1H‐1,2,4‐triazole (SPI‐10), bis(3‐aminopropyl)‐amine (SPI‐11), 2,6‐diaminopurine (SPI‐12), 2,4‐diamino‐6‐hydroxyprymidine (SPI‐13), or 3,5‐bis(4‐aminophenoxy)benzoic acid (SPI‐14). The obtained SPIs were soluble in polar organic solvents and gave tough and flexible membranes by solution casting. The SPI membranes having NH and COOH groups showed high thermal (decomposition temperature ≈200 °C) and mechanical (maximum stress >22 MPa) stability. Introducing NH groups, especially triazole and carbazole groups, was effective in improving proton conductive properties of SPI membranes at low humidity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2846–2854, 2010     

Redox‐induced configuration conversion for thioacetamide dimer can function as a molecular switch

The electronic switching properties of thioacetamide dimer (TAD) were investigated using the nonequilibrium Green's function method combined with density functional theory for design of a novel molecular switch. The H‐bonded TAD can be converted upon hole‐trapping to a three‐electron (3e)‐bonded configuration with a S∴S linkage which could provide a more favorable channel for charge transfer than the before. The redox‐induced configuration conversion between the H‐bonded and the 3e‐bonded TADs could govern the charge migration through the molecular junction with a considerable difference in conduction currents. The calculated I–V characteristic curves of two configurations exhibit a switching behavior with an On‐Off ratio in a range of about 4.3–7.6 within the applied voltages. Clearly, this hypothetical scheme provides a potential way to explore the novel conformation‐dependent molecular switch. © 2010 Wiley Periodicals, Inc. J Comput Chem 2010     

Beyond labels: A review of the application of quantum dots as integrated components of assays, bioprobes, and biosensors utilizing optical transduction

A comprehensive review of the development of assays, bioprobes, and biosensors using quantum dots (QDs) as integrated components is presented. In contrast to a QD that is selectively introduced as a label, an integrated QD is one that is present in a system throughout a bioanalysis, and simultaneously has a role in transduction and as a scaffold for biorecognition. Through a diverse array of coatings and bioconjugation strategies, it is possible to use QDs as a scaffold for biorecognition events. The modulation of QD luminescence provides the opportunity for the transduction of these events via fluorescence resonance energy transfer (FRET), bioluminescence resonance energy transfer (BRET), charge transfer quenching, and electrochemiluminescence (ECL). An overview of the basic concepts and principles underlying the use of QDs with each of these transduction methods is provided, along with many examples of their application in biological sensing. The latter include: the detection of small molecules using enzyme-linked methods, or using aptamers as affinity probes; the detection of proteins via immunoassays or aptamers; nucleic acid hybridization assays; and assays for protease or nuclease activity. Strategies for multiplexed detection are highlighted among these examples. Although the majority of developments to date have been in vitro, QD-based methods for ex vivo biological sensing are emerging. Some special attention is given to the development of solid-phase assays, which offer certain advantages over their solution-phase counterparts.     

Al掺杂La10(SiO4)6O3的制备及其导电性能

以溶胶-凝胶法在850℃制备了Al掺杂La10(SiO4)6O3,即La10(SiO4)6-x(AlO4)xO3-0.5x(x=0,0.5,1.0,1.5和2.0),通过TG-DTA、XRD、IR和SEM表征,所得产品为磷灰石相。以电化学阻抗谱研究了其导电性能,发现决定电导率大小的因素有两种,一是间隙氧的数量,二是晶胞的大小,两种因素的综合作用,使得Al掺杂0.5时La10(SiO4)5.5(AlO4)0.5O2.75的电导率最大,在700℃时其电导率达到1.88×10-2S·cm-1。氧分压对电导率的研究表明,其主要的电荷载体是O2-离子。