阿尔芬波加热托卡马克等离子体的能量平衡问题

本文用“剖面不变性”确定等效电子热导系数,研究了TCA装置上阿尔芬波加热的能量平衡,结果与实验符合很好。证明本文所用的方法对不同装置、不同加热方式都适用。     

Preparation and characterization of (PVP + NaClO4) electrolytes for battery applications

A sodium ion-conducting polymer electrolyte based on polyvinyl pyrrolidone (PVP) complexed with NaClO₄ was prepared using the solution-cast technique. The cathode film of V₂O₅ xerogel modified with polyvinyl pyrrolidone was prepared using the sol-gel method. Investigations were conducted using X-ray diffractometry (XRD), Fourier transformation infrared (FT-IR) spectroscopy. The ionic conductivity and transference number measurements were performed to characterize the polymer electrolyte for battery applications. The transference number data indicated that the conducting species in these electrolytes are the anions. Using the electrolyte, electrochemical cells with a configuration Na/(PVP + NaClO₄)/V₂O₅ modified by (PVP) were fabricated and their discharge profiles studied.     

Theoretical and experimental study of laser induced damage on GaAs by nanosecond pulsed irradiation

The surface damage experiments of gallium arsenide (GaAs) single crystal irradiated by 1.06 and 0.53 μm nanosecond irradiations are carried out with fundamental and frequency-doubled Nd:YAG laser, respectively. The surface damage thresholds for both wavelengths are experimentally determined and the damaged morphologies and elementary component are analyzed with electron probe microanalyzer (EPM). It is found that the components of Ga and As almost keep constant in our experiments when the irradiated fluence is just around the surface damage threshold and no oxygen is found at all. The theoretical calculations on temperature rise for both wavelengths are carried out using the purely thermal model. It is shown that for irradiation with photon energy above the corresponding band gap the theoretical calculation is in good agreement with the experimental results; however, for that with photon energy just below the band gap, the experimental results cannot be effectively explained by the purely thermal heating mechanism. Combining with the experiment of multi-shot damage from references we finally conclude that the damage by laser irradiation with photon energy below the band gap should be explained by the micro-defect accumulation and consequently enhanced absorption heating mechanism.     

Quantitative nanoscopic impedance measurements on silver-ion conducting glasses using atomic force microscopy combined with impedance spectroscopy

Nanoscopic impedance measurements were carried out on silver ion conducting glasses by coupling an impedance spectrometer with an atomic force microscope. When ac voltages were applied to a conducting AFM tip being in contact with the glass surface, silver nanoparticles were formed during the cathodic half cycle, which were not completely reoxidized in the anodic half cycle. We describe two protocols allowing for a controlled particle growth. The electrochemical oxidation/reduction processes led to low tip/sample interfacial impedances, and the formed silver particles acted as nanoelectrodes sensing the spreading resistance of the glass below the particles. We made a quantitative check of the spreading resistance formula under the assumption that spreading of the electric field is governed by the lateral diameter of the particles and found good agreement between the mean value of the local conductivities obtained at different tip positions and the macroscopic conductivity.     

基于伴随方程法的材料热传导系数反演方法

建立利用材料内部温度场的测量结果反演材料热传导系数随时间和空间位置变化函数的伴随方程法,参考迭代正则化的思想在优化过程中给目标函数设置停止准则.对典型算例计算表明,方法在测量噪声较小情况下能得出较为合理的反演结果.但在有测量噪声的情况下,反演结果与真值在边界x=0和L处存在着一定偏差.当测量噪声较大时,反演结果与真值的偏差较为明显,且初值选取会对反演结果有相当大的影响.     

Quantum hall effect observations in commercial MOSFETs and effects of thermoelectric power

Summary We have performed quantum Hall effect measurements on commercial low-mobilityn-channel MOSFETs. The channel resistancevs. electron concentration has the expected oscillating behaviour and gives the quantized values for the Hall resistance, at least in the region of higher mobility. One class of the tested samples gave a surprising behaviour, both in QHE and in field effect mobility measurements: this is thought to be due to uncontrolled differences in the diffusion zones at the interface between the channel and the contacts. In particular, we attribute the deformation of the QHE curves to the onset of a thermoelectromotive force which is present in the electron gas even if the sample is isothermal. A clear evidence for thermoelectric effects is given by measurements made on a high-quality Hall geometry MOSFET.

---

Riassunto Abbiamo eseguito misure di effetto Hall quantistico su MOSFET commerciali di bassa mobilità a canalen. Le curve di resistenza di canale in funzione della tensione di gate presentano l'atteso andamento oscillante e danno i valori quantizzati, almeno nelle regioni di maggiore mobilità. Una categoria di campioni ha mostrato andamenti sorprendenti, sia in misure di QHE che in misure di mobilità per effetto di campo: riteniamo che ciò sia dovuto a differenze incontrollabili nelle regioni di diffusione alle interfacce tra i contatti e il canale. In particolare, attribuiamo la deformazione delle curve di QHE all'instaurarsi di forze termoelettromotrici, che sono presenti nel gas elettronico nonostante i campioni siano isotermi. Misure eseguite su un MOSFET a geometria Hall di alta qualità forniscono una chiara evidenza dell'esistenza di effetti termoelettrici.

---

Резюме Проводятся измерения квантового эффекта Холла на коммерческих MOSFET с малой подвижностью вn-канале. Зависмость сопротивления канала от концентрации электронов обнаруживает осцилляторное поведение и дает квантованные значения сопротивления Холла, по крайней мере, в области высокой подвижности. Один класс исследованных образцов обнаруживает удивительное поведение при измерении квантового эффекта Холла и при измерении зависимости подвижности от поля. Такое поведение, по-видимому, обусловлено неконтролируемыми различиями в зонах диффузии между каналом и контактами. В частности, мы приписываем деформацию кривых квантового эффекта Холла возникновению термоэлектродвижущей силы, которая присутствует в электронном газе, даже в изотермических образцах. Приводятся подтверждения для термоэлектрических эффектов, проводя измерения эффекта Холла в MOSFET с высокой подвижностью.

     

The effect of oxygen vacancy on the oxide ion mobility in LaAlO3-based oxides

The electrical property of (La_1−xSr_x)_1−z(Al_1−yMg_y)O_3−δ (LSAM; x≤0.3, y≤0.15 and z≤0.1) was measured using the DC four-probe method as a function of temperature (500–1000°C) and oxygen partial pressure (1–10⁻²² atm). Among LSAMs, (La_0.9Sr_0.1)AlO_3−δ showed the highest ionic conductivity, σ_i=1.3×10⁻² S cm⁻¹ at 900°C. A simultaneous substitution at A and B sites or A site deficiency is expected to create larger oxygen vacancy and higher ionic conductivity. However, it showed a negative effect. The effect of the vacancy increase did not effect monotonously the ionic conductivity. It was found that the concentration of oxygen vacancy, [V_O], influences not only the oxide ion conductivity, σ_i, but also the mobility, μ_v, of [V_O]. These properties exhibit a maximum at around [V_O]=0.05. With the increase in [V_O], the activation energy, E_a, of the ionic conduction dropped from 1.8 to ca. 1.0 eV at [V_O]=0.05 and became almost constant at [V_O]>0.05. The dependency of the pre-exponential term, μ⁰_v, and E_a on [V_O] was analyzed and their effect on μ_v and σ_i was discussed with respect to crystal structure and defect association. It was estimated that the crystal structure mainly governs these properties. The effect of defect association could not be ignored but is considered to be a complicated correlation.     

热传导方程的一类无网格方法

构造求解热传导方程的一类无网格方法,只要选择好每个节点的适当的邻点集合,便可利用节点信息顺利进行计算.作为特殊情形,也可在各种结构或非结构网格上进行计算.在矩形或均匀平行四边形网格上进行计算时具有二阶精度,当在任意的不规则四边形或三角形网格上计算时仍然是守恒的和相容的,且至少具有一阶精度.作为数值试验,将该方法用于在不规则四边形网格上及四边形与三角形混合网格上求解二维非线性抛物型方程,并在不规则四边形网格上求解二维三温辐射热传导方程,均获得了较为理想的数值结果.     

Carbon nanotube-epoxy composites: The role of acid treatment in thermal and electrical conductivity

Wet acid oxidation treatment methods have been widely reported as an effective method to purify and oxidize the surface of industrial multi-walled carbon nanotubes. This work examines the use of a concentrated HNO₃/H₂SO₄ mixture in an attempt to optimize the purification procedure of industrial multi-walled carbon nanotubes with diameter distribution statistics. It is shown that acid treatments of several hours are enough to purify the nanotubes. The electrical and thermal conductivities of epoxy composites containing 0.05–0.25 wt% of an acid-treated multi-walled carbon nanotube have been studied. The electrical conductivity of the composites decreases by more than three orders, whereas the thermal conductivity of the same specimen increases very modestly as a function of the filler content.     

Derivation of the transport equation for electrons moving through random impurities

A single (nonrelativistic, spinless) electron subject to a constant external electric field interacts with impurities located on an infinitely extended lattice by a potential of random strength. The random strength is given by a field of Gaussian random variables. We show the existence of the averaged dynamics and prove that in the weak coupling limit, 0, ₂ t= fixed, one obtains the usual transport equation for the velocity distribution.Work supported by a Max Kade Foundation fellowship.On leave of absence of the Fachbereich Physik der Universität München.