复杂飞行器电气系统抗干扰设计技术研究

结合现代飞行器因其功能复杂,设备种类和数量众多,电气系统规模庞大,设备间连接关系复杂,接口信号类型多的特点,针对其较高的抗干扰性能和可靠性要求,系统分析了复杂飞行器电气系统辐射、电源串扰、浪涌串扰等干扰源类型、特性及影响。针对影响电路的传导、辐射、差模、共模干扰四种干扰模式,提出了可以从源头抑制提高复杂飞行器电气系统抗干扰性能的四个方面的设计方法和注意事项,分别是接地设计、屏蔽设计、隔离设计和滤波设计。最后,结合典型案例,分析了某飞行器电气系统因设计缺陷存在地信号干扰问题,通过增加隔离措施解决了该干扰问题,并通过了试验验证。     

Effect of Unplasticized Poly Vinyl Chloride (UPVC) Molecular Weight and Graft-Acrylonitrile-Butadiene-Styrene (g-ABS) Content on Compatibility and Izod Impact Strength of UPVC/g-ABS Blends

In this study three grades of rigid poly vinyl chloride (PVC) having different molar masses were melt blended with graft-acrylonitrile-butadiene-styrene (g-ABS) in different compositions. The effect of PVC molecular weight and g-ABS composition on the compatibility and Izod impact strength of the blends were investigated. Differential scanning calorimetry (DSC) results showed a single glass transition temperature (T_g) for all the blends, representative of miscibility between the PVC phase and the styrene-acrylonitrile copolymer (SAN) phase of g-ABS which, in turn, led to compatibility of the PVC/g-ABS blends. It was observed that in all the PVC grades the blends Izod impact strength increased with increasing g-ABS content. Also, at a given composition of g-ABS, by increasing the molecular weight of the PVC phase the impact strength of the blends increased. The morphology of the fracture surfaces from the impact tests were analyzed using scanning electron microscopy (SEM) micrographs and the results showed that with increasing g-ABS content in the blend, cloudy regions increased and eventually begin to overlap each other, and the deformed material on the fracture surfaces increased. This was attributed to the blend compatibility causing greater energy dissipation in the fracture process.     

Effect of the degree of crosslinking on the interfacial layer structure of poly(vinyl chloride) dispersed with crosslinked poly(n-butyl methacrylate) particles

The interfacial layer structure of a model incompatible polymer blend system was analyzed using ¹H pulse nuclear magnetic resonance (pulse NMR) spectroscopy. Non-crosslinked and crosslinked poly(n-butyl methacrylate) particles with a mean size of ca. 0.9 μm were prepared by seeded emulsion polymerization, and the degree of crosslinking was varied. The particles were powdered using a freeze-dry method and dispersed in poly(vinyl chloride) by melt blending. Dynamic mechanical analysis indicated that the non-crosslinked particles were completely compatible. In contrast, mutual diffusion of the polymer chains in the crosslinked particles was restricted within the particle/matrix interfacial layer. As a result, an incompatible phase structure in which the crosslinked particles were dispersed in the continuous phase was formed. Pulse NMR analysis indicated that the interfacial layer thickness was in the range of 17–98 nm. The thickness decreased with an increase in the degree of crosslinking in the particles. The interfacial layer thickness in the particles was approximately 10 times larger than that for the incompatible polymer pair. Tensile test results indicated that the elongation at break was dependent on the thickness of the interfacial layer. The yield stress was developed for the particles with high hardness that was independent of the interfacial thickness.     

Screw dislocations and an interfacial blunt crack with viscoelastic interface

This work deals with the influence of Kelvin-type viscoelastic interface on the generation of screw dislocations near the interfacial blunt crack tip in light of a pair of concentrated loads. The stress fields for dislocation and concentrated load have been obtained by using the integral transform and conformal mapping, the stress intensity factor have been studied, the image force acting on dislocation has been analyzed. The region r_b where n screw dislocations are generated by a pair of concentrated loads and dislocation number are obtained by displacement compatibility and stress compatibility conditions of self-consistent and self-equilibrated systems. The results show that: the force acting on dislocation starts with the value that a perfectly bonded interface, then with relaxation of the imperfect interface; the shield effect for dislocation decreases as time goes by; in addition, with time elapsing, the influence of material shear modulus rate on shielding effect becomes weaker and weaker. The scale of multiplier α(r_b/a) increases with relaxation of imperfect interface, the larger ratio of crack geometry c/a and the smaller ratio of shear modulus μ₁/μ₂ will lead the higher scale of multiplier. When μ₁/μ₂ = 1, the screw dislocations number first increases and then decreases with relaxation of imperfect interface, In addition, it possesses the highest value at t₀ ≈ 1 and tends to vanish at t₀ = ∞. When μ₁ < μ₂, the screw dislocations number increases with relaxation of imperfect interface. When μ₁ > μ₂, the screw dislocations number first increases then decreases with relaxation of imperfect interface, and possesses the highest value at t₀ ≈ 1, the negative value are exclude from the discussion.     

麻黄与桂枝混合汤剂的红外光谱

测试了单味药麻黄、桂枝及麻黄+桂枝混合汤剂红外光谱,标示其吸收峰,并确认其归属。在麻黄+桂枝汤剂中保留了麻黄、桂枝单味药物汤剂中的某些成分,见麻黄+桂枝光谱1 205和1 074 cm-1处等;麻黄、桂枝光谱中的某些成分并未在麻黄+桂枝光谱中出现,见麻黄+桂枝光谱1 394和678 cm-1处等;在麻黄+桂枝汤剂光谱中,出现了新的吸收峰,见麻黄+桂枝光谱757和1 407 cm-1处等。同时,因吸收峰位置有所改变,说明各基团在麻黄、桂枝、麻黄+桂枝汤剂中所处的化学环境不同。在麻黄+桂枝汤剂中可能新生成了麻黄、桂枝单味药物汤剂中所没有的化学成分。麻黄+桂枝汤剂所包含的药物成分并非是单味麻黄、桂枝汤剂所含药物成分的简单相加。文章在研究麻黄+桂枝混合汤剂红外光谱的基础上提出了方剂光谱学的概念。     

弹性地基梁理论在锚索抗滑桩计算中的应用


针对目前锚索抗滑桩的内力计算通常未考虑滑面以上桩身与岩土体的相互作用关系,而将滑面以上桩身按一般静力结构或有限次超静定结构计算的现状。本文根据弹性地基梁理论,考虑锚索与桩的变形协调,将初参数法运用到锚索抗滑桩的计算中,通过选取合理的初参数作为未知量,得到了锚索拉力以及桩身内力的计算过程。并结合皖南地区某处产生滑移弯曲变形的顺层滑坡治理工程进行了分析,与传统方法计算结果相比,本方法所得内力值较大,偏于安全,桩身内力分布规律与传统方法所得结果较吻合。

)     

碳纳米管的多光谱兼容衰减特性研究

重点研究碳纳米管的紫外-可见-红外多光谱兼容衰减特性。在傅里叶变换红外光谱、紫外-可见光谱分析、激光散射、电子显微镜(SEM)等现代分析技术的基础上阐述了碳纳米管的添加剂、质量浓度、结构与多光谱兼容衰减特性的密切联系,并探讨了调控多光谱衰减的新原理和新技术。结果表明,不同结构和浓度的碳纳米管流体的紫外-可见光谱差别很大。质量浓度为0.04 g·L-1时,粒径为30～50 nm的碳纳米管样品在265 nm紫外衰减的消光系数为7.825 m2·g-1,透光度为4.4%,紫外吸收光谱衰减为90%以上。验证了样品吸光度和碳纳米管的质量浓度是线性相关的。该碳纳米管在红外光谱范围的兼容衰减特性良好,碳纳米管薄膜厚度为0.1 mm时,测量光路中碳纳米管的质量为0.349 mg,粒径为30～50 nm碳纳米管与液体石蜡复合样品在4.0～6.25 μm和7.0～16.7 μm红外吸收光谱衰减在90%以上。     

PO-TDIE混合方法在天线电磁兼容问题中的应用

应用物理光学-时域积分方程(PO-TDIE)混合方法对电大尺寸平台天线电磁兼容问题进行分析.详细推导PO-TDIE混合方法的一般表达式,并给出计算复杂度.数值算例表明,方法提高了传统时间递推方法(MOT)的计算效率,能够有效应用于电磁兼容分析中.     

基于多巴胺自聚合及肝素固定改善钛的血液相容性

利用多巴胺自聚合及肝素固定的方法对纯钛进行表面修饰, 以改善其血液相容性. 采用水接触角测量、 X射线光电子能谱(XPS)和甲苯胺蓝法(TBO)等方法对所修饰的材料进行了表征. 采用溶血实验检测了材料的溶血性能, 并结合活化部分凝血活酶时间(APTT)测试和血小板黏附实验对所修饰材料的血液相容性进行了评价. 结果表明, 多巴胺能够在钛表面实现自聚合, 肝素可以共价接枝在聚多巴胺层上, 经肝素修饰后的材料的表面亲水性显著提高, 而且具有较低的溶血率, APTT时间显著延长, 血小板的黏附数量和被激活程度也显著降低. 因此, 纯钛经多巴胺自聚合以及肝素接枝修饰后的血液相容性得到了显著改善, 有望成为具有抗凝血功能的新型心血管植入材料.     

羧基化氧化石墨烯的可控合成及血液相容性

采用自由基引发剂偶氮二异丁腈(AIBN)作为功能改性剂, 通过AIBN分解产生的异丁腈自由基进攻氧化石墨烯上五元环与七元环的缺陷点, 形成氰基改性氧化石墨烯中间体, 再通过水解反应制得羧基化氧化石墨烯[GeneO-C(CH₃)₂-COOH]纳米材料. 采用傅里叶变换红外光谱(FTIR), X射线衍射(XRD), 热重分析(TGA)和原子力显微镜(AFM)等方法对合成的材料进行了表征, 并采用复钙时间测试考察了材料的血液相容性. 研究结果表明, 氧化石墨烯中羧基的含量可以通过调整AIBN和GeneO的投料比来控制. 本方法不但可提高氧化石墨烯的羧基含量, 而且可使其具有良好的血液相容性.