Surface and interfacial properties of PVDF/acrylic copolymer blends before and after UV exposure

Morphological and chemical properties of both the surface and interface of poly(vinylidene fluoride)/poly(methyl methacrylate)-co-poly(ethyl acrylate) (PVDF/PMMA-co-PEA) blend films have been investigated before and after the samples were exposed to ultraviolet (UV) irradiation using a xenon arc lamp at 50 °C and 9% relative humidity (RH) for 7 months. Surface and interfacial morphologies were studied by atomic force microscopy (AFM). Chemical composition information was obtained by confocal Raman microscopy, attenuated total reflection-FTIR spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. Results show an enrichment of the PVDF material at the air surface, while the acrylic copolymer enriches the interface. Blends having greater than 50% mass fraction of PVDF show little change in the surface morphology after UV exposure for 7 months. However, for a lower PVDF content, blends exhibit significant degradation of PMMA-co-PEA copolymer and a much rougher surface after UV exposure. Microstructural changes in the PVDF spherulites are also observed after UV degradation. It is found that the surface and interfacial morphologies are correlated with the chemical properties.     

两亲性嵌段聚合物的同步辐射小角x射线散射研究

应用同步辐射小角x射线散射(SAXS)方法研究了不同聚合条件下苯乙烯对乙烯基苯甲酸两亲性嵌段聚合物的聚集行为,结果发现该聚合物在选择性溶液中自组装形成胶束.胶束的形态和结构取决于嵌段聚合物的组成、浓度以及溶剂的性质等因素 关键词： 小角x射线散射 两亲性嵌段聚合物 分形维数 粒径     

Latex particles bearing hydrophilic grafted hairs with controlled chain length and functionality synthesized by reversible addition–fragmentation chain transfer

A method is described for synthesizing latex particles with anchored hairs by the grafting of hydrophilic chains, synthesized by reversible addition–fragmentation chain transfer, onto functionalized latex particles. These have the potential to bind biologically active species. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1188–1195, 2003     

Upper and lower bounds for the energy of bipartite graphs

Using Lagrange's multiplier rule, we find upper and lower bounds of the energy of a bipartite graph G, in terms of the number of vertices, edges and the spectral moment of fourth order. Moreover, the upper bound is attained in a graph G if and only if G is the graph of a symmetric balanced incomplete block design (BIBD). Also, we determine the graphs for which the lower bound is sharp.     

Preparation of Phosphoric-Carboxylic Cation Exchangers from Wood Cellulose

Phosphorus-containing cellulose cation exchangers were synthesized by reaction of wood cellulose with orthophosphoric acid and the ternary polymer from glycidylmethacrylate, styrene, and maleic anhydride. The effects of the ratio of reactants, temperature, and duration of the reaction on the phosphorylation and exchange capacity of the modified cellulose material were studied.     

混合效应模型中的D-最优设计

本研究的是混合效应-Ⅱ模型，首先，给出二阶模型存在D-最优回归设计点的必要条件。其次，组合D-最优回归设计和D-最优区组设计BIBD构造D-最优设计并给出寻找新的D-最优设计点的方法。以两种有代表性的组合误差分布为例，阐明新的D-最优设计点的获得过程，并给出了数值结果。     

Physicochemical studies on hydrophobic PEO‐PPO‐PEO triblock copolymer micelles in SDS micellar environment

The shape, size, aggregation, hydration, and correlation times of water insoluble PEO‐PPO‐PEO triblock copolymer micelles with sodium dodecylsulfate (SDS) micelles were investigated using transport studies and dynamic light scattering technique. From the conductance of micellar solutions of the polymer in 25 mM SDS and 5 mM NaCl, the hydration of polymer micelles were determined using the principle of obstruction of electrolyte migration by the polymer. The asymmetry of the micellar particles of polymer and polymer‐SDS mixed micellar systems in 5 mM NaCl and their average axial ratios were calculated using intrinsic viscosity and hydration data obeying Simha–Einstein equation. Hydration number and micellar sizes were variable with temperature. The shape of the polymer micelles has been ellipsoidal rather than spherical. The micellar volume, hydrodynamic radius, radius of gyration, diffusional coefficients as well as translational, rotational and effective correlation times have been calculated from the absolute values of the axes. The partial molal volume of polymer micelles has also been determined and its comparison with the molar volume of pure polymer suggested a volume contraction due to immobilization of the water phase by the hydrophilic head groups of the polymer. The thermodynamic activation parameters for viscous flow favor a more ordered water structure around polymer micelles at higher temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2410–2420, 2007     

Cyclic reduction and FACR methods for piecewise hermite bicubic orthogonal spline collocation

Cyclic reduction and Fourier analysis-cyclic reduction (FACR) methods are presented for the solution of the linear systems which arise when orthogonal spline collocation with piecewise Hermite bicubics is applied to boundary value problems for certain separable partial differential equations on a rectangle. On anN×N uniform partition, the cyclic reduction and Fourier analysis-cyclic reduction methods requireO(N ²log₂ N) andO(N ²log₂log₂ N) arithmetic operations, respectively.     

Synthesis,characterization, and micellization of an epoxy‐based amphiphilic diblock copolymer of ϵ‐caprolactone and glycidyl methacrylate by enzymatic ring‐opening polymerization and atom transfer radical polymerization

Amphiphilic diblock copolymer polycaprolactone‐block‐poly(glycidyl methacrylate) (PCL‐b‐PGMA) was synthesized via enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). Methanol first initiated eROP of ?‐caprolactone (?‐CL) in the presence of biocatalyst Novozyme‐435 under anhydrous conditions. The resulting monohydroxyl‐terminated polycaprolactone (PCL–OH) was subsequently converted to a bromine‐ended macroinitiator (PCL–Br) for ATRP by esterification with α‐bromopropionyl bromide. PCL‐b‐PGMA diblock copolymers were synthesized in a subsequent ATRP of glycidyl methacrylate (GMA). A kinetic analysis of ATRP indicated a living/controlled radical process. The macromolecular structures were characterized for PCL–OH, PCL–Br, and the block copolymers by means of nuclear magnetic resonance, gel permeation chromatography, and infrared spectroscopy. Differential scanning calorimetry and wide‐angle X‐ray diffraction analyses indicated that the copolymer composition (?‐CL/GMA) had a great influence on the thermal properties. The well‐defined, amphiphilic diblock copolymer PCL‐b‐PGMA self‐assembled into nanoscale micelles in aqueous solutions, as investigated by dynamic light scattering and transmission electron microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5037–5049, 2007     

The effect of ITO films thickness on the properties of flexible organic light emitting diode

Indium tin oxide (ITO) thin films were deposited on cyclic olefin copolymer substrate at room temperature by an inverse target sputtering system. The crystal structure and the surface morphology of the deposited ITO films were examined by X-ray diffraction and atomic force microscopy, separately. The electrical properties of the conductive films were explored by four-point probing. Visible spectrometer was used to measure the optical properties of ITO-coated films. The performance of the flexible organic light emitting diode device with different thickness anode was investigated in this study.