Development of low concentrated solar photovoltaic system with lead acid battery as storage device

Energy storage system powered by renewable energies is a viable option to meet energy requirement without addition of carbon footprints to the environment. This study involves development of theoretical and computational models for a solar photovoltaic (PV) system coupled with a lead acid battery. The study commenced with selection of most appropriate lead acid battery and PV system for installation in a representative location in Riyadh, Kingdom of Saudi Arabia. Various technical and economic parameters were assessed and calculated by computational approach. The optimized lead acid battery was integrated with low concentration solar PV panels (CPV) followed by a feasibility study. Theoretical model was developed for the integrated system to calculate various parameters of the CPV and lead acid battery. Technical and economic assessment of this coupled unit was calculated using a theoretical approach. The developed model was then subjected to computational approach for verification and validation analysis of the integrated system. The detailed assessment of batteries and integrated system show the applicability of this system in Riyadh region. The research will be extended to develop energy storage systems for remote areas using lead acid batteries.     

Enhancing optomechanical force sensing via precooling and quantum noise cancellation

We theoretically investigate optomechanical force sensing via precooling and quantum noise cancellation in two coupled cavity optomechanical systems.We show that force sensing based on the reduction of noise can be used to dramatically enhance the force sensing and that the precooling process can eifectively improve the quantum noise cancellation.Specifically,we examine the effect of optomechanical cooling and noise reduction on the spectral density of the noise of the force measurement;these processes can significantly enhance the performance of optomechanical force sensing,and setting up the system in the resolved sideband regime can lead to an optimization of the cooling processes in a hybrid system.Such a scheme serves as a promising platform for quantum back-action-evading measurements of the motion and a framework for an optomechanical force sensor.     

The optical nonreciprocal response based on a four-mode optomechanical system

We propose a scheme for realizing the optical nonreciprocal response based a four-mode optomechanical system,consisting of two charged mechanical modes and two linearly coupled optical modes. Two charged mechanical modes are coupled by Coulomb interaction, and two optical modes are coupled to one of mechanical modes by radiation pressure. We numerically evaluate the transmission probability of the probe field to obtain the optimum optical nonreciprocal response parameters. Also, we show that the optical nonreciprocal response is caused by the quantum interference between the optomechanical couplings and the linearly coupled interaction that breaks the time-reversal symmetry.     

增材制造金属反射镜的发展综述

随着光学测量与遥感领域的不断发展,折反式光学系统对重量、体积和环境适应性等需求不断提高。基于增材制造技术的金属反射镜以其便于实现优化设计、快速制造和加工工艺性好等优点,逐渐获得国内外学者的关注与研究。与传统金属反射镜相比,增材制造金属反射镜可以提高反射镜的结构刚度,同时可实现更高程度的轻量化。增材制造反射镜可以满足光学系统对环境适应性和快速性的需求。本文首先讨论了金属反射镜的评价指标;其次,综述了国内外在基于增材制造技术制备金属反射镜领域的发展现状和技术参数,从增材制造金属反射镜的基体设计与制备和基体的后处理2个方面展开论述;然后,通过分析,总结了增材制造金属反射镜的技术路线和关键技术;最后,对增材制造反射镜的应用前景提出了展望。     

基于自由曲面反射镜的低投射比超短焦投影物镜的光学设计

为了设计低投射比的超短焦投影物镜,本文采用自由曲面和折反式的光路结构设计了一种具有低投射比的超短焦投影物镜系统。该物镜由一个旋转对称的折射透镜组和一个自由曲面反射镜组成。采用11.938 mm的数字微镜器件(DMD)作为空间光调制器产生图像源。采用法线加权迭代优化的方法计算自由曲面。最后,分析了系统的性能。仿真结果表明:超短焦投影物镜可在580 mm的投影距离处实现3048 mm尺寸的大屏幕投影,系统的投射比低至0.19,系统的最大畸变小于0.72%。能够满足低投射比超短焦投影物镜的设计要求。该投影系统具有低投射比、低畸变、投影效果好等优点,可为超短焦投影系统的进一步发展提供有益参考。     

折衍混合复消色差望远物镜设计的PWC方法

将衍射结构视为折射率无限大的薄透镜,研究了衍射透镜高折射率表示的折衍混合复消色差望远物镜设计的PWC方法;设计了焦距为2000mm、相对孔径为1/15的双片型折衍混合复消色差望远物镜,并与常规三片型纯折射复消色差望远物镜进行了比较,结果表明双片型折衍混合复消色差望远物镜具有更好的二级光谱校正能力,色球差更小,因此具有更好的成像质量.     

球幕投影光学系统的设计与研究

设计了一种飞行训练使用的球幕投影仪光学系统.系统焦距为5.5mm, 相对孔径为1/4,全视场角175°,光谱范围为可见光波段,采用了3组10片的反远距型结构.与普通投影系统不同之处在于,该系统在保证大视场的前提下有效地减小了场曲对像质的影响.给出了球幕结构对场曲影响的定量分析以及较为方便的屏幕半径选择方法.因全部采用国产玻璃而同时满足了国产化的要求.     

计算神经科学

计算神经科学是近三十年来出现的一个新兴交叉学科,它强调采用数学定量的方法,如数学建模、理论分析和数值模拟等来研究和解决神经科学中的重要科学问题,一方面神经科学实验现象为发展新的数学模型、理论和算法提供了基础,另一方面通过数学定量,能反过来揭示神经科学实验现象背后的数理机制、发现新的科学规律.随着欧盟、美国、日本和我国脑...     

颗粒材料三维应力路径下的接触组构特性

颗粒材料的宏观应力变形特征与其微观接触力、组构等紧密相关.一般而言,强接触系统属于颗粒内部体系的传力结构,其对应的组构张量是影响宏观应力性质的重要因素.细观数值方法(如离散单元法)能够反映物理试验的基本规律,并且可以方便地提取宏微观数据来研究颗粒体系的应力变形机制.采用离散单元法(discrete element method,DEM)进行一系列等$p$等$b$应力路径下颗粒材料的真三轴试验,在此基础上研究了三维应力路径下颗粒材料的宏微观力学参数的演化过程、三维组构张量与应力张量多重联系以及强接触体系反映的宏观应力特征.研究表明:颗粒体系偏应力峰值状态和临界状态均存在与加载路径无关的宏微观特征;三维应力路径下组构张量与应力张量存在非共轴性,但其联合不变量演化过程表现出加载路径无关的特征;与弱接触系统的组构张量相比,强接触系统的组构张量更能反映宏观应力张量的特征;强弱接触体系的组构张量对颗粒体系宏观响应的贡献不同,其分界点存在一定取值范围,但采用平均接触力较为简单合理.