Arsenidostannate mit Arsen-analogen [SnAs]-Schichten: Darstellung und Struktur von Na[Sn2As2], Na0,3Ca0,7[Sn2As2], Na0,6Sr0,6[Sn2As2], Na0,6Ba0,4[Sn2As2] und K0,3Sr0,7[Sn2As2]

Arsenidostannates with [SnAs] Nets Isostructural to Grey Arsenic: Synthesis and Crystal Structure of Na[Sn₂As₂], Na_0.3Ca_0.7[Sn₂As₂], Na_0.4Sr_0.6[Sn₂As₂], Na_0.6Ba_0.4[Sn₂As₂], and K_0.3Sr_0.7[Sn₂As₂] The metallic lustrous compounds Na[Sn₂As₂], Na_0.3Ca_0.7[Sn₂As₂], Na_0.4Sr_0.6[Sn₂As₂], Na_0.6Ba_0.4[Sn₂As₂] and K_0.3Sr_0.7[Sn₂As₂] were prepared from melts of mixtures of the elements. The compounds crystallize in the trigonal system (space group R3 m, No. 166, Z = 3) with lattice constants see in “Inhaltsübersicht”. The structures are isotypic to Sr[Sn₂As₂] containing puckered [SnAs] nets which are stacked with a sequence of six layers. The E(I)/E(II) atoms are located between each second [SnAs] layer in trigonal antiprismatic interstices formed by As atoms. In the resulting [Sn₂As₂] double layers the _∞²[SnAs] nets are stacked in such a way that additional Sn—Sn contacts arise.     

NMR chemical shifts in the low–pH form of a-chymotrypsin. A QM/MM and ONIOM–NMR study

 The relationship between hydrogen bonding and NMR chemical shifts in the catalytic triad of low-pH α-chymotrypsin is investigated by combined use of the effective fragment potential [(2001) J Phys Chem A 105:293] and ONIOM–NMR [(2000) Chem Phys Lett 317:589] methods. Our study shows that while the His57 N^δ1−H bond is stretched by a relatively modest amount (to about 1.060 ?) this lengthening, combined with the polarization due to the molecular environment, is sufficient to explain the experimentally observed chemical shifts of 18.2 ppm. Furthermore, the unusual down-field shift of H^ɛ1 (9.2 ppm) observed experimentally is reproduced and shown to be induced by interactions with the C=O group of Ser214 as previously postulated. The free-energy cost of moving H^δ1 from His57 to Asp102 is predicted to be 5.5 kcal/mol. Received: 26 September 2001 / Accepted: 6 September 2002 / Published online: 21 January 2003 Contribution to the Proceedings of the Symposium on Combined QM/MM Methods at the 222nd National Meeting of the American Chemical Society, 2001 Correspondence to: J. H. Jensen e-mail: jan-jensen@uiowa.edu Acknowledgements. This work was supported by a Research Innovation Award from the Research Corporation and a type G starter grant from the Petroleum Research Fund. The calculations were performed on IBM RS/6000 workstations obtained through a CRIF grant from the NSF (CHE-9974502) and on supercomputers at the National Center for Supercomputer Applications at Urbana-Champaign. The authors are indebted to Visvaldas Kairys for help with the CHARMM program, and to Daniel Quinn for many helpful discussions.     

Activation and stabilization of enzymes entrapped into reversed micelles

Observations of the activity of two hydrolyzing enzymes—protease and α-amylase—entrapped inside the reversed micelles formed by surfactants in hexane, benzene, and cyclohexane are reported. The surfactants chosen for this study are: Tween 80, a nonionic surfactant, Cetyl pyridinium chloride, a cationic surfactant, and two anionic surfactants, sodium lauryl sulfate and Aerosol OT. Tween 80 enhances the activity of both protease and α-amylase. Sodium lauryl sulfate and Aerosol OT, which are ionic surfactants, enhance the activity of protease, but inhibit the activity of α-amylase. Cetyl pyridinium chloride, however, enhances the activity of α-amylase, but inhibits the activity of protease. Enhanced activity is generally severalfold greater in comparison to the activity observed in the usual aqueous system in the absence of reversed micelles. It has also been observed that the enhanced activity of the enzymes entrapped inside the reversed micelles remains preserved for a much longer period of time in comparison to the activity in the usual aqueous systems. These observations, which support the view that with proper choice of surfactant and the organic solvent, reversed micelles act like a microreactor that provides a favorable aqueous microenvironment for enzyme activity, have biotechnological overtones.     

Purification and characterization of a solvent stable protease from Pseudomonas aeruginosa PseA

A solvent tolerant Pseudomonas aeruginosa PseA strain was isolated from soil. It secreted a novel alkaline protease, which was stable and active in the presence of range of organic solvents, thus potentially useful for catalysis in non-aqueous media. The protease was purified 11.6-fold with 60% recovery by combination of ion exchange and hydrophobic interaction chromatography using Q-Sepharose and Phenyl Sepharose 6 Fast Flow matrix, respectively. The apparent molecular mass based on the sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) was estimated to be 35,000 Da. The enzyme was stable in the pH range of 6.0-9.0, the optimum being 8.0. The Km and Vmax towards caseinolytic activity were found to be 2.7 mg/ml and 3 micromol/min, respectively. The protease was most active at 60 degrees C and characterized as a metalloprotease because of its sensitivity to EDTA and 1,10-phenanthroline. It was tested positive for elastase activity towards elastin-orcein, thus appears to be an elastase, which is known as pseudolysin in other strains of P. aeruginosa. The protease withstands range of detergents, surfactants and solvents. It is stable and active in all the solvents having log P above 3.2, at least up to 72 h. These two properties make it an ideal choice for applications in detergent formulations and enzymatic peptide synthesis.     

Optimization of alkali-alkalkine earth cation separation on weak cation-exchangers

Summary The elution behavior of alkali and earth alkaline cations has been studied on a newly synthesized weak cationexchanger (WCX). Applying this stationary phase isocratic separation of these cations is possible. The dependence of retention on competing ion concentration is described via a simple model. The influence of crown ethers as well as organic eluent additives on selectivity and peak efficiency is demonstrated. With optimized separation such cations can be determined with detection limits of about 0.5 ppm using a conductivity detector without ion suppression.     

碱土金属掺杂纳米TiO2催化剂的制备与光催化活性的评价

The nanometer TiO₂ were prepared by the hydrolyze-gel method and fellowed by doping alkaline-earth metals (Mg, Ca, Sr, Ba). XRD, SEM, diffuse reflection spectra were used to investigate their characteristices. The result indicates that the average particles size of the TiO₂ is about 80 nm and keep uniformity in distributing. The product was mainly anatase in 300～400 ℃ calcinations, the einstein shift of absorption spectrum was observed after doping the alkaline-earth metals. The best mole percentages of Mg, Ca, Sr and Ba are 0.5%, 1.0%, 1.5%, 1.5% respectively. Under the same reaction conditions, it is more effective to the UV-catalyed degradation reaction that the catalysts containing Mg and Ca were calcined at 300 ℃ for 1h or containing Sr and Ba were calcined at 400 ℃ for 1 h. The photocatalystic activity is considerably depondent on pH and the concentration of the oxidant. Using the sunlight to do the degradation experimental, the result also show that the doping catalysts has higher degradation efficiency than that of pure TiO₂.     

Reaction of benzothiazol-2-one with 4-hydroxy-4-methyl-2-pentynonitrile

Reaction between the title compounds gave the unexpected 3-[5,5-dimethyl-2,5-dihydrofur-4-yl-2-(3-isopropanol-2-propenonitrile)imino]benzothiazol-2-one, as a result of the addition of two cyanoacetylene molecules.Irkutsk Institute of Organic Chemistry, Siberian Branch, Russian Academy of Sciences, Irkutsk 664033. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 4, pp. 1003–1005, April, 1992.     

Thioureas from 3-aminoquinazolin-4(3H)-one. 2. Unusual alkaline recyclization of 3-(N",N",S-trialkylisothioureido)quinazolin-4(3H)-ones into new 1,3,4-oxadiazoles

3-(N",N",S-trialkylisothioureido)quinazolin-4(3H)-ones obtained by the reactions of 3-(N",N"-dialkylthioureido)quinazolin-4(3H)-ones with alkyl halides undergo unusual recyclization into 5-(2-aminophenyl)-2-dialkylamino-1,3,4-oxadiazoles under the action of aqueous solutions of alkali, hydrazine, and primary aliphatic amines. A plausible mechanism of the recyclization was proposed.     

Study of the Influence of Alkaline Ions (Li, Na and K) on the Structure of the Silicate Entities in Silico Alkaline Sol and on the Formation of the Silico-Calco-Alkaline Gel

The study of silico-calco-alkaline gel is essential to warn against the degradation of concrete due to the alkali-silica reaction. In the laboratory, those gels are simulated by the destabilization of a silico-alkaline sol by calcium ions. Their speed of formation depends on the alkali species. The influence of alkaline ions (Li, Na and K) on the structure of silicate entities in sol and on the gel formation has been studied. The state of polymerization of the silico-alkaline sol was determined by NMR and depends on the alkali species and the molar ratio (Rm = [SiO2]/[A2O] with A = Li, Na or K). It appears that lithium enhances the polymerization. By scattering techniques (SAXS and ELS), the evolution of size and number of scattering particles during gelation can be determined from scattering curves with Guinier approximation. The mechanism of gelation appears as a hierarchic structure composed of several discrete sizes.     

Double bond isomerization of 5-vinylbicyclo[2.2.1]hept-2-ene to 5-ethylidenebicyclo[2.2.1]hept-2-ene over alkaline earth oxides

All the alkaline earth oxides exhibit activities for double, bond isomerization of 5-vinylbicyclo[2.2.1]hept-2-ene (VBH) to 5-ethylidenebicyclo[2.2.1]hept-2-ene (EBH) at a reaction temperature of 273 K. The order of the activity on the basis of unit weight of catalyst was CaO>MgO>SrO>BaO when compared under optimum pretreatment conditions. The E/Z ratio in the products is determined by the reaction temperature regardless of the type of catalyst; the ratios were 82/18 and 88/12 for the reaction temperatures of 323 and 273 K, respectively.