碱性水蒸气处理的ZSM-5沸石酸性质及孔结构的影响

 采用XRD，NH3－TPD，比表面积和孔结构测定等研究了在不同温度下用含10％NH3的水蒸气处理时HZSM－5沸石n（Si）／n（Al）＝25）酸性质及孔结构的变化规律．结果表明，随着处理温度的提高，HZSM－5的结构未发生明显的变化；样品的总酸量下降很快，但弱酸分布量相对提高，而强酸分布量相对下降；提高处理温度，样品的比表面积和微孔体积减小，二次孔或中孔体积及外表面积有增大的趋势．     

Electrooxidation Mechanism of Methanol at Pt-Ru Catalyst Modified GC Electrode in Electrolytes with Different pH Using Electrochemical and SERS Techniques

The electrochemical and in-situ surface-enhanced Raman spectroscopy （SERS） techniques were used to investigate the electrooxidation behavior of methanol in acidic, neutral and alkaline media at a Pt-Ru nanoparticle modified glassy carbon （Pt-Ru/GC） electrode. The results showed that methanol could be dissociated spontaneously at the Pt-Ru/GC electrode to produce a strongly adsorbed intermediate, CO. It was found that CO could be oxidized more easily in the alkaline medium than in the acidic and neutral media. The peak potential of methanol oxidation was shifted from 0.663 and 0.708 V in the acidic and neutral media to -0.030 V in the alkaline medium, which is due to that the adsorption strength of CO on the Pt surface in the alkaline medium is weaker than that in the acidic and neutral media. The final product of the methanol oxidation is CO2. However, in the alkaline medium, CO2 produced would form CO3^2- and HCO3^- resulting in the decrease in the alkaline concentration and then in the decrease in the performance of DMFC. Therefore, the performance of the alkaline DMFC is not Stable.     

Electrochemical behaviour of an indium electrode in concentrated KOH solutions at different temperatures

Summary The electrochemical behaviour of pure indium in KOH solutions (1–4M) was studied at different temperatures (25–70°C) by potentiostatic techniques. Two anodic peaks corresponding to the formation of In(OH)₃ and In₂O₃ were observed. The heights of the two peaks increased with the increase of alkali concentration. An increase of temperature increased the peak currents and shifted their corresponding potentials to more negative values. The variation of the peak currents and peak potentials with scan rate suggested that the anodic dissolution of indium was a diffusion controlled process. In cyclic voltammetry, the reverse scan consistently showed one peak which was attributed to the reduction of anodic oxidation products into indium. X-ray diffraction analysis confirmed the presence of In(OH)₃ at the first anodic peak, In(OH)₃ and In₂O₃ at the second anodic peak and In₂O₃ in the permanent passive region.

---

Zum elektrochemischen Verhalten einer Indium-Elektrode in konzentrierter Kalilauge bei verschiedenen Temperaturen

Zusammenfassung Es wurde das Verhalten von reinem Indium in 1 – 4M KOH-Lösungen bei Temperaturen zwischen 25 und 70°C mittels potentiostatischer Methoden untersucht. Zwei anodische Peaks, entsprechend der Bildung von In(OH)₃ und In₂O₃, traten auf. Die Höhe der beiden Peaks wurde mit zunehmender Alkalikonzentration gesteigert. Eine Temperaturerhöhung verstärkte die Peakströme und verschob die entsprechenden Potentiale zu negativeren Werten. Die Abhängigkeit der Peakströme und Peakpotentiale von der Scangeschwindigkeit legte den Schluß nahe, daß die anodische Lösung von Indium in einem diffusionskontrollierten Prozeß stattfindet. Bei der cyclischen Voltammetrie zeigte der reverse Scan einheitlich einen Peak, der der Reduktion der anodischen Oxidationsprodukte zu Indium zugeschrieben wurde. Röntgendiffraktionsanalyse bestätigte die Präsenz von In(OH)₃ beim ersten anodischen Peak, In(OH)₃ beim zweiten Peak und In₂O₃ im permanent passiven Bereich.

     

Removal of H2S from Exhaust Gas by Use of Alkaline Activated Carbon

The purpose of this research was to select an activated carbon and alkaline solution blend that generated the best H₂S adsorption on alkaline-activated carbon. RB₂ (activated carbon) impregnated with NaOH solution was shown to have the optimum H₂S removal efficiency. The optimum NaOH concentration was 50 mg per gram of carbon. H₂S adsorption via RB₂-NaOH₅₀ was five times that of a corresponding fresh-activated carbon. The adsorption equivalent of H₂S is nearly 1 (mol-H₂S/mol-AOH), therefore, H₂S + AOH AHS + H₂O was the major reaction. The H₂S adsorption isotherm corresponded to the Freundlich isotherm.     

N-丙基-N-[2-(2,4,6-三氯苯氧基)乙基]-1H-咪唑-1-甲酰胺的合成

以2，4，6-三氯苯酚和1，2-二氯乙烷为初始原料，在相转移催化剂十六烷基三甲基溴化胺和弱碱性助剂三乙胺存在下合成了N-丙基-N-[2-(2，4，6-三氯苯氧基)乙基]-1H-咪唑-1-甲酰胺，其结构经元素分析,IR，^1H NMR分析证实。并对该合成路线的反应机理进行了讨论。     

冠醚配合物的研究XV.若干席夫碱及仲胺型双冠醚和碱金属离子的配位反应

本文运用微量电导滴定及计算机拟合技术，研究了若干席夫碱及仲胺型双冠醚和碱金属离子的配位反应，测定了配合物的组成及稳定常数，并对实验结果进行了讨论。     

An approach to sequence-specific antibody proteases

We describe here a novel strategy for the isolation of antibodies with sequence-specific protease activity: the synthesis of dipeptide haptens in which the targeted peptide bond has been replaced by a ring-strained or torsionally strained hydroxyethylene transition-state analog. Thus, the analogs mimic both a peptide bond in a distorted, reactive conformation and the transition state for peptide bond hydrolysis. In order to obtain sequence-specific antibody proteases, these analogs have been flanked with additional amino acid residues in preparation for immunization. In particular, we have synthesized peptides containing analogs such as 2-cis-amino-3-cis-hydroxycyclobutane carboxylic acid andendo-(3-amino-2-hydroxy)bicyclo[2.2.1]heptane-7-anti-carboxylic acid. We have also prepared a series of peptide derivatives containing analogs, such as 2-[3-amino-2-oxo-1-azetidinyl]-3-methylbutanoic acid, in which the targeted peptide bond has been incorporated into a β-lactam ring. Since the “peptide bond” has been left intact, these species mimic only a distorted ground state. At present, antibodies are being elicited against a number of the above peptide derivatives.     

Optimization of cation detection by capillary zone electrophoresis with indirect UV absorbance

Summary The indirect UV detection of cations by capillary zone electrophoresis gives peaks of very different height or area between cations. We show that the height depends on the electrophoretic mobility of the cation compared with the electrophoretic mobility of the chromophore used. Moreover, the limit of detection can be easily improved by about 4-fold by adjusting the concentration of complexing agent or by using a chromophore with the same velocity as the studied cation. Using a new parameter termedsensitization power we can optimize the limit of detection and have determined the best chromophores for each family of cations.Sensitization power is a maximum for: alkali metals and alkali earths with imidazole and UV Cat 2^?, for transition metal with pyridine, for light rare earth with ephedrine and UV Cat 1^?, for heavy lanthanides with 1-naphthylamine and phenyl-trimethyl-ammonium bromide. Corrected areas of all cations studied have normal distributions directly proportional to their ionic charge. Certain behaviour can be predicted for elements such as actinides. Detection can also be enhanced because the relation of proportionality between ionic charge and corrected area allows comparison of the performance of all chromophores.     

ImmobilizedE. coli Alkaline Phosphatase

We have immobilized E.coli alkaline phosphatase (EC 3.1.3.1) by linking it covalently to sepharose 4B. This preparation has several advantages over the soluble enzyme. The immobilized enzyme is easily separable from other constituents in incubation mixtures. The immobilized enzyme can be reused repeatedly and is more stable than the soluble enzyme to heat treatment in the presence of 10 mM Mg²⁺. The insoluble and soluble phosphatases removed 75 and77%, respectively, of the inorganic phosphorus from casein. The immobilized enzyme inactivated two enzymes believed to be active in the phosphorylated state, acyl-CoA : cholesterol acyltransferase (ACAT) by 39% and NADPH-cytochrome P-450 reductase by 89%. The utility of immobilized alkaline phosphatase for studying the phosphorylation and dephosphorylation of soluble or membrane-bound enzymes and proteins is discussed.