埋置框架质量检测的探讨

提出了埋置框架的回传射线矩阵法,研究了方波脉冲轴向作用、水平作用和斜向作用下有缺陷埋置框架和无缺陷埋置框架的速度波．结果表明;横向速度波不能识别埋置框架的基桩缺陷,轴向速度波可以识别,而且基桩缺陷信号很强烈;脉冲水平作用不能识别基桩缺陷,轴向或斜向作用可以识别．     

中子成像技术在元素分析中的应用

中子成像作为一种快速、直观的无损检测技术,在核工业、航空航天、新能源、地质、考古、先进制造等多个领域得到广泛应用。中子成像利用中子不带电、穿透能力强、对轻元素敏感、可区分同位素和近邻元素等特性,非常适合开展含氢元素、近邻元素和同位素等材料的无损检测。本文概述了中子成像技术的基本原理及特点,并结合中国先进研究堆(CARR)中子成像装置上的应用案例, 重点介绍了国内外中子成像技术在储氢材料、燃料电池、岩石、核燃料元件、古代文物等领域的典型应用。随着中子成像技术的不断发展和广泛应用,有望为我国更多领域研究提供更强有力的技术支撑。     

圆柱类构件超声相控阵聚焦模型

在利用平面相控阵超声换能器对圆柱类构件检测时,受曲界面结构引起的入射波和回波时延的影响,扫描声束的波阵面产生弯曲,在利用传统迭代遍历算法计算延迟时间时效率低,无法发挥相控阵换能器检测优势。针对上述问题,建立了一种基于圆柱类构件特征和耦合介质特性的超声相控阵扫描成像的聚焦模型。该模型基于换能器、耦合介质、圆柱类构件材料特性和几何关系以及声线模型和折射定律,建立了耦合介质及被检构件的声速、曲面曲率半径、阵列与曲面间的距离等关联的延迟时间聚焦控制模型。利用该模型计算出的延时时间,对各阵元发射时间进行控制,从而实现扫描声束的聚焦。该文以液体和有机玻璃制介质楔块为例,对圆柱钢曲面的相控阵声束聚焦进行了仿真实验,结果表明该文方法计算效率显著提升,同时声束可以在预设位置实现聚焦,验证了该模型在计算效率上的优势与有效性。     

基于有限元模拟的超声应力系数标定及分析*

应力系数的标定作为超声应力检测最为关键的环节,直接决定应力检测结果的准确性。传统的应力系数试验标定对于被测物的表面粗糙度、耦合剂厚度、声匹配块与被测物接触力等因素十分敏感,但缺少基本参照值。基于COMSOL建立多物理场耦合的超声应力检测模型,施加不同的拉伸载荷,计算临界折射纵波到达时间与不同应力值之间的关系,模拟标定45#钢的超声应力系数为13.7MPa/ns。单轴水平拉伸试验标定的45#钢应力系数为16.5MPa/ns。结果表明,通过两种方法标定的应力系数较为接近,试验标定的应力系数偏大,这是由于有限元方法能够消除试验过程中各种不确定因素对声时精确测量所造成的影响,能够更加纯粹的反映材料的声弹性效应,因此具有作为基础数据的参考价值。有限元方法作为传统试验方法的补充,可以减小试验标定数据的离散性,提高超声应力检测结果的可信度。     

Density Functional Theory Study on the Adsorption of Dioxygen on Small Pt-Pd Clusters

1 INTRODUCTION The bimetallic nanoclusters are of standing inte- rest since they can exhibit catalytic, electronic and optical properties distinct from those of corre- sponding pure nanoclusters[1～4]. Palladium and pla- tinum, well known for their catalytic properties, are often used as the catalyst in different fuel cells[5～8]. Several experimental results illustrate that for the oxygen reduction reaction (ORR), which is one of the primary reactions taking place in many fuel cells and…     

From acylethynylpyrroles to pyrrole-pyrone ensembles in a one step

Functionalized pyrrole-pyrone ensembles have been synthesized in up to 87% yields by KOH/MeCN [4+2]-cyclization of available acylethynylpyrroles with methylene active esters. The synthesized compounds, due to their potential rich chemistry, are rewarding building blocks for novel pyrrole-integrated complex molecules and promising precursors of medicine targeted compounds.     

Stimuli-Responsive Particle-Based Amphiphiles as Active Colloids Prepared by Anisotropic Click Chemistry

Amphiphiles alter the energy of surfaces, but the extent of this feature is typically constant. Smart systems with amphiphilicity as a function of an external, physical trigger are desirable. As a trigger, the exposure to a magnetic field, in particular, is attractive because it is not shielded in water. Amphiphiles like surfactants are well known, but the magnetic response of molecules is typically weak. Vice-versa, magnetic particles with strong response to magnetic triggers are fully established in nanoscience, but they are not amphiphilic. In this work colloids with Janus architecture and ultra-small dimensions (25 nm) have been prepared by spatial control over the thiol-yne click modification of organosilica-magnetite core–shell nanoparticles. The amphiphilic properties of these anisotropically modified particles are proven. Finally, a pronounced and reversible change in interfacial stabilization results from the application of a weak (<1 T) magnetic field.     

Microfluidic paper-based analytical devices with instrument-free detection and miniaturized portable detectors

Microfluidic paper-based analytical devices (µPADs) have attracted much attention over the past decade because they offer clinicians the ability to deliver point-of-care testing and onsite analysis. Many of the advantages of µPADs, however, are limited to work in a laboratory setting due to the difficulties of processing data when using electronic devices in the field. This review focuses on the use of µPADs that have the potential to work without batteries or with only small and portable devices such as smartphones, timers, or miniaturized detectors. The µPADs that can be operated without batteries are, in general, those that allow the visual judgment of analyte concentrations via readouts that are measured in time, distance, count, or text. Conversely, a smartphone works as a camera to permit the capture and processing of an image that digitizes the color intensity produced by the reaction of an analyte with a colorimetric reagent. Miniaturized detectors for electrochemical, fluorometric, chemiluminescence, and electrochemiluminescence methods are also discussed, although some of them require the use of a laptop computer for operation and data processing.     

Complete active space analysis of a reaction pathway: Investigation of the oxygen–oxygen bond formation

Water nucleophilic attack is an important step in water oxidation reactions, which have been widely studied using density functional theory (DFT). Nevertheless, a single-determinant DFT picture may be insufficient for a deeper insight into the process, in particular during the oxygen–oxygen bond formation. In this work, we use complete active space self-consistent field calculations and describe an approach for a complete active space analysis along a reaction pathway. This is applied to the water nucleophilic attack at a Ru-based catalyst, which has successfully been used for efficient water oxidation and in silico design of new water oxidation catalysts recently.