La_(1-x)Ca_xMn_(1.03)O_3外延薄膜的输运性质

本文报道了用溶胶 -凝胶 (sol- gel)方法 ,在 La Al O3 (10 0 )衬底上制备 L a1-x Cax Mn1.0 3 O3 外延薄膜的输运性质 .Ca含量 x在 0 .2～ 0 .6 2 1范围内 ,电阻率随温度的变化关系 ,是从类半导体行为向金属导电行为转变 ,在 x≥ 0 .5的 4个样品中并没有发现电荷有序绝缘体 (COI)和反铁磁绝缘体 (AFI)现象 .Tc最高达 2 75K,MR最大可达 10 4 % (x =0 .2 ,H =1.5T) .在 T >Tp 或 Tc的温区内 ,电阻率ρ∝exp(- E/ k T) ,说明载流子的迁移是以热激活方式进行的 ,热激活能为 0 .32～ 18.3me V.当 T 0 .4 ) .     

ON TESTING THE EQUALITY OF K MULTIPLE AND PARTIAL CORRELATION COEFFICIENTS

1 IntroductionWe are given k independent Wishart densities of the p x p random symmetric positivedefinite matrices G1, G2,' t Gkwhere Ri denotes the population correlation matrir, and K as a generic letter denotes thenormalizing constants of density functions in this paper. The squared multiple correlationcoefficient of the i-th population is pf = r:Riz1.)ri, whereand a likelihood ratio test for testing the hypothesisis desired.Now Wilks (l932, l946) provides certain procedures and guidel…     

智能板模态传感与控制的数值分析

智能结构技术对空间大型柔性结构 振动控制问题具有重要意义,采用独立模态空间控制技术对压电智能板进行主动振动控制是一种常用方法,以前对这一问题的研究仅限于解析的方法,本文采用有限单元法,设计了新的压电模态传感器与致动器,该方法能够适用于形状及边界条件较为复杂的智能板,算例分析证明了该方法的正确性。     

二维信号分析法在超声无损检测中的应用

本文综述了近年来二维信号分析法在超声无检测（NDT）中的应用,其中包括二维快速Fourier交换（FFT）、Wigner-Ville分布（WWD）、Gabor变换（GT）和小波变换（WT）等,对它们自在NDT应用中的优缺点进行了分析比较和讨论。     

10 GHz可调谐主动锁模光纤环形激光器研究

采用主动锁模技术 ,在光纤环形激光器中实现了脉冲重复率为 10GHz、脉冲宽度为 10ps、线宽为 0 171nm的激光输出 ,波长调谐范围达 37 8nm。实验结果表明 ,主动锁模光纤激光器由于其输出脉冲窄、脉冲啁啾小、波长调谐方便及与光纤系统兼容等优点 ,有望成为未来超高速光通信系统中的理想光源。     

Application of magneto-optical method for real-time visualization of eddy currents with high spatial resolution for nondestructive testing

In this paper we describe a new, laser supported, eddy current microscope for the real-time visualization of eddy current distributions. In the experimental set-up, the induction of eddy currents is conventionally performed by an alternating current excitation coil above the object surface. The magnetic field induced by the eddy currents is detected by the use of the Faraday effect. For that purpose, a laser beam is passed through a suitable thin crystal integrated in the excitation coil. The polarization direction of the laser beam is rotated in this thin crystal depending on the local magnetic field. The area distribution of the rotation angle is transformed into a grey value picture using an optical set-up, which comprises a conventional microscope, a lighting technique, an analyzator, and a CCD sensor. By choosing a suitable optic, a real-time measurement of the magnetic field with a high spatial resolution can be carried out. In this paper, the basic physics and the design of the new microscope are described. The initial results of experimental investigations concerning the resolution power of magneto-optic eddy current sensors are presented and compared with conventional eddy current sensors.     

Lensless Fourier holography for digital holographic interferometry on biological samples

Digital holography as a tool for highly sensitive, interferometric non-destructive testing has several advantages compared to holographic measurements based on conventional storage media like an all-digital processing and a direct access to the phase of the object wave. Experimental results of interferometric investigations of heart valve bio-prostheses with a setup for lensless Fourier holography are presented which demonstrate that this technique is applicable to such biological samples with their wet and unstable surfaces. Limitations on size and resolution of the reconstructed object caused by the properties of the CCD sensor are discussed.     

X荧光光谱法测定锡酸铅TDI还原型催化剂中锡和铅含量

报道了一种准确度高、分析步骤简单的锡酸铅TDI还原型催化剂中锡和铅含量的X射线荧光光谱方法（XRF）．设计制备了标准样品,研究了仪器测试条件下元素峰位的选择和背景扣除方法．结果表明：X荧光光谱法在不破坏样品的前提下完成对二氧化锡和铅含量的同时测定,重复实验10次,Pb实验相对标准偏差为0．37％;SnO2实验相对标准偏差0．61％。     

子孔径拼接技术在大口径高陡度非球面检测中的应用

 为了能够精确地完成对大口径高陡度非球面在细磨和抛光过程中的测量,提出了一种将子孔径拼接技术和补偿技术相结合的检测方法。介绍了该方法的基本原理,建立了合理的数学模型,编制了拼接计算软件。利用该方法对一外形尺寸为400 mm×300 mm的高次离轴非球面进行了测试,通过最小二乘法拟合消去各子孔径相对基准子孔径的调整误差以及整个系统的装调定位误差,得到了准确的全孔径面形分布。对实验精度和误差来源进行了分析,并将拼接面形与全孔径测量面形相对比,二者是一致的。     

一种三次非旋转对称的相位板的检测系统设计

作为零位干涉检测方法中非常有前途的一种方法.计算全息可以用于非旋转对称的非球面的检测.以三次相位板为例,阐述了利用计算全息图检测非旋转对称的非球面的基本原理.分析并推导了三次相位传播过程引入的高阶波像差的理论公式,给出了三次相位板的检测系统的没计结果.详细讨论了计算全息图衍射级次的分离以及计算全息图的二元化,给出了振幅型的计算全息图的图样.计算全息图的刻线最小问隔是40μm,计算全息图的制作精度对检测结果的波前误差的影响仅仅为0.005λ.对检测系统作了详细的公差分析,结果表明所有调整公差对整个检测系统的影响和方根值为83.954 nm.