Active nickel-based reduction of organic compounds

The reducing system NiCl₂·2H₂O—Li—arene_cat (cat is catalyst) was proposed for use to reduce a wide range of organic compounds, including alkenes, alkynes, carbonyl compounds, imines, halogenated derivatives, sulfonates, aromatic compounds, hydrazines, azo and azoxy compounds, N-oxides, and nitrones. The degree of reduction can be controlled for some substrates. Deuterium can be incorporated in the reaction products using nickel chloride deuteriohydrate. Nitrones, N-alkoxyamides, and acyl azides are also reduced with the Li—arene_cat system containing no nickel salt.     

Steam-carbon gasification catalyzed by calcium: Assessment of the porous structure of active carbons from plum stones and synthetic active carbons

A need for an elaboration of the methods for synthesis and characterization of activated carbons with a requisite porous structure has existed for a long time. One of the methods giving possibility for creating controlled mesopore and micropore structures deals with the steam gasification of various carbon materials. In this work the effects of calcium catalyst on the catalytic steam gasification of active carbons from plum stones and porous polymers are presented. Determination of micropores capacity and specific adsorption in mesopores have been performed by means of the _s method, but adsorption on the heterogeneous solids was described by the integral equation with various local isotherms. This equation has been solved by the regularization method. Based on this method the changes in structural parameters of active carbons depending on the amount of calcium catalyst were estimated.Nomenclature d width of slit-like micropore - F(x) distribution function of the half-width - p vapor pressure of sorbate - p/p _N relative pressure - PSAC Plum Stone Active Carbon - average pore radius, nm - S ₁ relative limit of the validity of experimental point on the adsorption isotherm in the computations by means of regularization method - SAC Synthetic Active Carbon - S _BET specific surface area calculated by means of BET method, m²/g - S _mes mesopore surface area, m²/g - S _mic micropore surface area, m²/g - T absolute temperature, K - V _mes sorption capacity of mesopores, cm³/g - V _mic sorption capacity of micropores, cm³/g - V _p sorption capacity of pores, cm³/g - w/w weight in weight concentration - x half-width of slit-like micropore, nm - x ₁ maximum of half-width of micropore slit, nm - average half-width of slit-like micropore, nm - X _min-X _max integration limits of thex Greek Letters Greek Letters variance of average half-width of slit-like micropore, nm² - local relative filling of micropores - total relative filling of micropores     

Comparability of analytical results obtained in proficiency testing based on a metrological approach

A “yes–no” type of criterion is proposed for the assessment of comparability of proficiency testing (PT) results when the PT scheme is based on a metrological approach, i.e. on the use of a reference material as the test sample, etc. The criterion tests a null hypothesis concerning the insignificance of a bias of the mean of the results from a traceable value certified in the reference material used for the PT. Reliability of such assessment is determined by the probabilities of not rejecting the null hypothesis when it is true, and rejecting it when it is false (the alternative hypothesis is true). It is shown that a number of chemical, metrological and statistical reasons should be taken into account for careful formulation of the hypotheses, enabling the avoidance of an erroneous assessment of the comparability. The criterion can be helpful for PT providers and laboratory accreditation bodies in analysis of PT results.     

煤自燃初期的反应机理研究

从实验得到的可能引起煤自燃的8个活性基团入手，提出了一系列简单煤分子模型，利用密度泛函DFT/6-31G对其完成了几何优化，计算了包括反应焓变、吉布斯自由能和活化能等，从热力学和动力学角度分析了计算结果。基于理论计算获得了煤活性基团的活泼性次序，得出了煤自燃初期的反应机理主要是氧分子先进攻煤分子中的活性基团，产生活泼性很高的中间体，然后中间体进一步反应得到水或二氧化碳及其他反应产物，计算结果与实验基本符合。     

常压气相氧化羰基化合成碳酸二乙酯

碳酸二乙酯是一种重要的有机化工原料,可广泛用于合成农药如脱叶灵,医药如喹啉酮衍生物,中间体3-氧硫代羧酸酯,还可用于电子管阴极的镀层[1-3]。生产碳酸二乙酯的传统方法为:无水乙醇与光气反应生成氯甲酸乙酯,氯甲酸乙酯继续与乙醇反应生成碳酸二乙酯后经水洗蒸馏制成。使用光气为原料对设备的要求较高。我们在常压下气相羰基化合成碳酸二乙酯[4]:2ＮＯ+Ｃ2Ｈ5ＯＨ+0.5Ｏ2→2Ｃ2Ｈ5ＯＮＯ+Ｈ2Ｏ(1)ＣＯ+2Ｃ2Ｈ5ＯＮＯ→(Ｃ2Ｈ5Ｏ)2ＣＯ+2ＮＯ(2)产生的一氧化氮可与氧气和乙醇进行反应再生为亚硝酸乙酯,符合原子经济反应且几乎不放出对…     

杂多酸的固载化Ⅲ.溶剂对H4Siw12O40.24H2O在活性炭上吸附的影响

研究了Ｈ４ＳｉＷ１２Ｏ４０．２４Ｈ２Ｏ（ＳｉＷ１２）在水，乙醇，乙酸，乙酸丁酯中在活性炭上的吸附得出，活性炭微孔结构对ＳｉＷ１２在其表面的吸附起着分子筛作用，水溶剂化的ＳｉＷ１２分子可顺利进行活性１．７ｎｍ左右的微孔，而其它溶剂化的ＳｉＷ１２分子，则需较大的孔径，提出了ＳｉＷ１２在活性炭表面吸附的微孔中孔扩散模型。     

Preparation of apolar glass capillary columns by the barium carbonate procedure

As an extension of previous reports, the barium carbonate procedure has been optimized in detail for the preparation of apolar columns. The aim was to produce optimum overall column characteristics, and to maintain them unchanged under the prolonged influence of the highest possible temperature. The main parameters under optimization were glass variety, leaching of glass surface with aqueous HCl, and amount of barium carbonate deposited, while deactivation and coating were kept constant. The basic column characteristics were adsorption properties and thermostability of deactivation, acid/base behaviour and separation efficiency. They were determined by a new, quantitative testing procedure. Intense leaching was able to eliminate almost totally the differences between glass varieties and to create a well-defined glass surface. While untreated glass, leached glass, and barium carbonate treated glass showed specific weak points in the respective column quality, the combination of leaching and barium carbonate treatment yielded the highest and most stable quality. Some technical modifications of the preparation procedure are described, including deactivation in the gas phase, and use of pentane as a solvent for static coating.     

Computed Potential Energy Surfaces and Minimum Energy Pathways for Chemical Reactions

Computed potential energy surfaces are often required for computation of such observables as rate constants as a function of temperature, product branching ratios, and other detailed properties. We have found that computation of the stationary points/reaction pathways using CASSCF/derivative methods, followed by use of the internally contracted CI method with the Dunning correlation consistent basis sets to obtain accurate energetics, gives useful results for a number of chemically important systems. Applications to complex reactions leading to NO_x and soot formation in hydrocarbon combustion are discussed.     

Influence of Urbach Energy,Temperature, and Longitudinal Position in the Active Layer on Carrier Diffusion Length in Perovskite Solar Cells

The diffusion length of charge carriers in the active layer of a perovskite solar cell (PSC) of the structure Glass/PEDOT: PSS/CH₃NH₃PbI₃/PC60BM/Al is modelled. It is found that the diffusion length depends on the position x in the active layer measured from the PEDOT: PSS interface, Urbach energy and temperature. By varying the voltage in the range from zero to , it is shown that the dependence of diffusion length on the position x in the active layer reduces at higher voltage. The combined influence of applied voltage and temperature on the diffusion length of charge carriers is investigated and it is found that in the low voltage range the diffusion length is temperature independent, but it becomes significantly temperature dependent at higher voltages. Also, it is found that the diffusion length decreases as the applied voltage increases and this reduction becomes much more significant at higher voltage and temperatures. The combined influence of applied voltage and Urbach energy on diffusion length of charge carriers reveals that the diffusion length decreases when both the applied voltage and Urbach energy increase. However, the reduction in the diffusion length due to the increase in Urbach energy becomes less significant at higher voltage.