KIT-6负载CeO2催化CO2和甲醇合成碳酸二甲酯

采用不同老化温度(80、100、120和150℃)合成了一系列KIT-6载体,并通过浸渍法制备了相应的CeO_2/KIT-6催化剂。结合X射线衍射、N_2物理吸附、NH_3程序升温脱附、CO_2程序升温脱附、透射电子显微镜、傅里叶变换红外光谱和X射线光电子能谱等表征结果,详细考察了老化温度对KIT-6结构以及CeO_2/KIT-6催化剂直接催化CO_2和甲醇合成碳酸二甲酯(DMC)反应活性的影响。结果表明,不同老化温度下制备的KIT-6均保持其独特的三维孔道结构。随着老化温度升高,KIT-6比表面积先增大后减小,当老化温度为100℃时,KIT-6比表面积达到最大(683 m~2·g~(-1))。KIT-6较高的比表面积有利于提高CeO_2分散度,进而提高暴露的活性位点数量,催化活性随催化剂表面中等碱/酸性吸附位数量和Ce~(3+)含量的增加而逐渐提高。其中,CeO_2/100-KIT-6催化剂中CeO_2颗粒尺寸最小(5.9 nm),暴露的活性位数量最高,催化活性最佳。随后,考察了反应温度和压力对CeO_2/100-KIT-6催化活性的影响。随着反应温度提高,催化活性先升高后降低,当反应温度为140℃时,催化活性最高;且催化活性随反应压力的提高而逐渐增加。在反应温度为140℃、压力为6.8 MPa条件下,催化剂经6次循环后,DMC收率由15 mmol·g_(CeO_2)~(-1)逐渐降低至2.8 mmol·g_(CeO_2)~(-1),原因归结为反应过程中CeO_2纳米颗粒发生团聚,使暴露出的活性位数量减少。     

NaN_3对玉米萌发过程中超弱光子辐射的影响

为了解读植物种子萌发过程中超弱光子辐射信息的生物学意义,采用呼吸抑制剂NaN3处理萌发玉米种子,跟踪测量和分析了玉米种子萌发过程中超弱光子辐射中自发光子辐射和外界光诱导的延迟光子辐射的变化规律,同时研究了萌发玉米种子鲜质量的变化.结果发现,NaN3同步抑制了萌发玉米自发光子辐射和鲜质量的增长,造成萌发玉米延迟光子辐射的初始光子数和延迟光子辐射积分强度大幅度降低,相干时间减小.机理分析表明,NaN3对呼吸代谢电子传递链的抑制造成的自由基反应减弱是萌发玉米自发光子辐射减小的原因,自发光子辐射强度可以作为玉米萌发状态的信号,延迟光子辐射动力学参数的大小可以表征萌发玉米呼吸代谢的强弱,相干时间是种子细胞组织序性的量度,通过对萌发种子超弱光子辐射的采集和分析可以实现对萌发种子细胞代谢和功能状态变化的灵敏和无损检测.     

直接测距型激光主动成像系统发展现状

对直接测距型激光主动成像系统进行了深入研究。按照工作方式分类介绍了国外相关研究机构激光主动成像系统的工作原理及系统参数, 归纳总结并比较分析了各工作方式的优缺点。分析认为:基于单点或小面阵探测器配合光机扫描方案可实现较远作用距离, 但其对激光器重频要求较高, 后续数据处理复杂, 且系统体积、功耗较大;而基于Flash探测器的激光主动成像系统易于实现小型化, 对激光器重频要求较低。作用距离受限问题可通过电子扫描得以有效解决。在具体应用时, 需根据实际需求, 综合考虑系统体积、质量、功耗、激光器输出峰值功率及脉冲重复频率、所能获取的探测器类型、后续数据处理能力等多种因素折衷选取。     

车用塑料耐刮擦测试方法概述

耐刮擦测试是汽车内外饰塑料零件质量控制的一项重要指标。介绍了耐刮擦测试原理,刮擦头、负载、样品与刮擦头相对运动状态等是决定测试方法的关键技术要素,评价塑料耐刮擦性的方法分为目视法及仪器测量法。综述了五指刮擦法、硬度试验笔刮擦法、网格刮擦法、摩擦色牢度刮擦法及其他刮擦法测试方法,分析和总结了不同测试方法的特点和应用范围。     

New optically active poly(amide–imide)s from N-trimellitylimido-l-amino acid and 1,2-bis[4-aminophenoxy]ethane in the main chain: Synthesis and characterization

Six new optically active poly(amide–imide)s (PAIs) with good inherent viscosities were synthesized from the direct polycondensation reaction of N-trimellitylimido-l-amino acids with 1,2-bis[4-aminophenoxy]ethane by direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride (CaCl₂)/pyridine (py). Diamine was synthesized by using a two-step reaction. At first 1,2-bis[4-nitrophenoxy]ethane was prepared from the reaction of two equimolars 4-nitrophenol and one equimolar 1,2-dibromo ethane and the dinitro compound was reduced by using Pd/C. Also N-trimellitylimido-l-amino acids were synthesized by the condensation reaction of trimellitic anhydride with two equimolars of various l-amino acids in acetic acid solution. The polymerization reactions produced a series of optically active PAIs with a high yield and good inherent viscosity. The resulted polymers were fully characterized by means of FTIR and ¹H NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation, solubility tests, thermogravimetric analysis (TGA), and a derivative of thermogravimetric (DTG) analysis.     

Tandem CH Activation/Arylation Catalyzed by Low‐Valent Iron Complexes with Bisiminopyridine Ligands

Tandem C?H activation/arylation between unactivated arenes and aryl halides catalyzed by iron complexes that bear redox‐active non‐innocent bisiminopyridine ligands is reported. Similar reactions catalyzed by first‐row transition metals have been shown to involve substrate‐based aryl radicals, whereas our catalytic system likely involves ligand‐centered radicals. Preliminary mechanistic investigations based on spectroscopic and reactivity studies, in conjunction with DFT calculations, led us to propose that the reaction could proceed through an inner‐sphere C?H activation pathway, which is rarely observed in the case of iron complexes. This bielectronic noble‐metal‐like behavior could be sustained by the redox‐active non‐innocent bisiminopyridine ligands.     

Scanning Droplet Cell for Chemoselective Patterning through Local Electroactivation of Protected Quinone Monolayers

A reagentless strategy for template‐free patterning of uniformly inert surfaces is suggested. A layer of p‐hydroquinone (HQ) protected by the tert‐butyldimethylsilyl (TBDMS) group is electrografted onto glassy carbon electrodes. Chemoselective activation is performed through electrochemically controlled cleavage of the TBDMS group, which yields the redox‐active surface‐confined quinone moieties. The latter are shown to undergo electrochemically induced Michael addition, which serves for subsequent functionalization of the electrode surface. Patterning of the TBDMS–quinone‐modified surface is accomplished by using selective localized cleavage of the protecting group. State‐of‐the‐art direct‐mode scanning electrochemical microscopy (SECM) patterning fails to yield the anticipated interfacial reaction; however, the electrochemical scanning droplet cell (SDC) is capable of conducting the localized chemoselective reaction. In a small area, dictated by the dimensions of the droplet, electrochemically induced cleavage of the protecting group can be performed locally to give rise to arrays of active quinone spots. Upon deprotection, the redox signals, attributed to the hydroquinone/benzoquinone couple, provide the first direct evidence for chemoselective electrochemical patterning of sensitive functionalities. Subsequent SECM studies of the resulting modified areas demonstrate spatial control of the proposed patterning technique.     

大孔Mo-Ni/Al_2O_3催化剂的催化裂化柴油加氢性能研究

采用三次纳米自组装合成法,制备了一种以二次纳米自组装Al2O3为主体的大孔主客体催化剂FA-40,具有0.78 cm3·g-1的孔容、114 m2·g-1的比表面积、27 nm的平均孔径、6.0 nm和40 nm的双峰孔结构、孔分布在10~100 nm高度集中、低堆积密度为0.56 g·cm-3、活性金属含量高达35.70%。XRD和TEM分析结果显示,活性金属以直径小于2 nm的微晶态纳米粒子形式均匀分散于主体表面。采用劣质催化裂化柴油进行20 h加氢实验评价,反应趋于稳定时,FA-40的脱硫、脱氮及芳烃饱和率分别达到94.4%、95.5%和67.9%,与F-5相比分别提高了20%、80%和140%。300 h的长周期加氢实验表明,FA-40具有良好的加氢性能。     

对新时期分析测试中心定位的思考

就如何理解和看待新时期分析测试中心的定位和发展,如何解决分析测试中心在结构和管理上存在的固有问题提出了粗略的观点.希望对分析测试中心的发展起到抛砖引玉的作用.     

Co3O4纳米晶催化氧化甲烷的理论研究：C-H键活化的晶面效应及活性中心

甲烷是一种在自然界中大量存在的原材料,在取代原油和合成重要化工产品等许多领域具有潜在的应用价值. 然而,由于CH₄中C-H键的键能特别大（约~4.5 eV）,如何实现甲烷的绿色有效转化在化学化工领域仍然是一个挑战. 本文采用密度泛函理论对Co₃O₄（001）和（011）晶面活化甲烷C-H键的机理进行了理论研究,得到了如下结论：（1） CH₄的C-H键在Co₃O₄晶面的解离具有很高的活性,只需要克服大约1 eV的能垒;（2）与Co^2＋相连的Co-O离子对是CH₄活化的活性位点,其中两个带正负电荷的离子对C-H解离起着协同作用,帮助产生Co-CH₃和O-H物种;（3）（011）面的反应活性明显大于（001）面,与实验的观察一致. 本文的计算结果表明,Co₃O₄纳米晶面对CH₄中C-H键的活化表现出明显的晶面效应和结构敏感效应,Co-O离子对活性中心对于活化惰性的C-H键发挥了关键作用.