Improvement of the Pd/Al2O3 Catalyst by the Control of the Sol-Gel Preparative Parameters

In this work, the metal dispersion of the Pd/Al₂O₃ catalyst prepared by sol-gel method is improved by an adequate optimisation of the preparative variables. First, the gelation temperature and the ageing time are selected, in order to avoid the reduction of the metal precursor (palladium acetylacetonate, Pd(acac)₂) by the solvent (sec-butanol, sB). The metal sintering effect on the catalysts treated in oxygen at 500°C is then minimized when the alumina pore size is controlled by the variation of the alumium alkoxide (AsB) concentration and the acetic acid amount ([AcA]/[AsB]). The appearance of new palladium particles on the alumina surface and the matching between the particle diameters and the pore sizes were also effective for the metallic surface area improvement on the samples treated in oxygen at 800°C. Compared to the reference catalysts, the higher metal dispersion obtained on the sol-gel ones was the determinant factor for their higher catalytic activity in methane combustion.     

One-step synthesis of the chelate oxides of bis(trialkylantimony) by an oxidative method

The chelate oxides of bis(trimethylantimony) (Me₃SbL¹)₂O (i = 1 or 2, L¹-acetylacetonate, L² - trifluoroacetylacetonate) and bis(triethylantimony) (Et₃SbL¹)₂O have been obtained in 79–85% yields by a one-step oxidation of trialkylantimony withtertbutylhydroperoxide in the presence of -diketones in benzene at 20 °C.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 154–155, January, 1995.This work was carried out with financial support from the Russian Foundation for Basic Research (Project No. 94-03-08846).     

Cyphostemmins A-B, two new antifungal oligostilbenes from Cyphostemma crotalarioides (Vitaceae)

Two new antifungal resveratrol dimers, cyphostemmins A-B (1–2), have isolated from the roots of Cyphostemma crotalarioides planch (Vitaceae) together with resveratrol 3 and previously known reseveratrol dimers (4–7). Structures of these new compounds have been established on the basis of their MS and ¹H and ¹³C NMR spectroscopic data.     

高水相W／O型乳化膏体油膜稳定性的研究

高水相Ｗ／Ｏ型乳液是指水相体积占７４％以上，属于高度不稳定的分散体系［１，２］．乳化炸药的问世，使这种高水相Ｗ／Ｏ型乳液有了新的实际应用．这种炸药是９０％～９５％重的硝酸铵盐（占水相８０％～９０％重）水溶液高度分散在５％～１０％的油相中构成Ｗ／Ｏ型乳...     

Polymer-Attached Thiazolium Salts-Catalyzed Addition of Aldehydes to α, β-Unsaturated Carbonyl Compounds

A homogeneous catalyst, 3-benzyl-5-(2-hydroxyethyl)-4-methyl-1,3-thiazolium chloride, for addition of aldehydes to activated double bond, was attached to 20% cross-linked polystyrene-divinylbenzene copolymer. The attached catalysts could be easily removed from the reaction mixture. Polymer-attached thiazolium salts in the presence of triethylamine are active catalysts for addition of aromatic and aliphatic aldehydes to α,β-unsaturated ketones to yield γ-diketones.     

Synthesis and Crystal Structure of 2-Benzylsulefnyl-3-cyano-5,7-dimethyl-pyrazolo[1,5-a]pyrimidine

1 INTRODUCTION The pyrazolo[1,5-a]pyrimidines are the active compositions in many pesticides and medicines. A new class of KDR (tyrosine kinase VEGFR-2) ki- nase inhibitors is discovered and found to have affi- nity for the human CRF-1 (Corticotrophin re…     

Hydrothermal Synthesis, Crystal Structure, and Characterization of a Novel Terbium（Ⅲ） Coordination Polymer Bridged by 5-Sulfoisophthalate Trivalent Anions

Introduction Recently, several efforts have been made for thestudy of coordination polymers assembled from lantha-nide ions and aromatic polycarboxylate ligands becauseof their intriguing structural diversity and potentialapplications in several fields, s…     

反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

Pb2＋在液/液界面迁移的电化学研究及其应用

用循环伏安法研究了双硫腙络合推动Pb^2＋在水/乙酰丙酮界面迁移的伏安过程. 实验证明, 该过程是受扩散控制的不可逆过程, Pb^2＋由水相转移到有机相中, 与双硫腙形成络合物Pb(DzH)₂. Pb^2＋的峰电位在－0.3 V处, 并且在5× 10^－6～0.1 mol•L^－1范围内与峰电流成正比. 这一方法为工业废水中铅的在线、现场测定提供了可靠、灵敏的检测方法.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.