Affinity capillary electrophoresis study of the linkage existing between proton and zinc ion binding to bacitracin A1

Measurements by capillary electrophoresis (CE) of bacitracin A(1) effective mobility at different pH values permitted to estimate the five acidic dissociation constants and the Stokes radii at different protonation stages of the macrocyclic dodecapeptide. The pK(a) values were 3.6 and 4.4 for the two carboxylic groups of the lateral chains of D-Asp-11 and D-Glu-4, respectively, 6.4 for the aza-atom of the imidazole ring of His-10, 7.6 for the amino group of N-terminal Ile-1 and 9.7 for the delta-amino group of D-Orn-7, very close to the values obtained by other researchers by titration experiments. In agreement with a rigid macrocyclic structure the Stokes radii of different protonated forms ranged only between 14.3 and 14.8 A. Best fitting procedures performed on experimental mobility measured at two different pH values (5.50 and 6.72) in the presence of increasing Zn(+2) concentration allowed confirming the model that assumes the binding of Zn(+2) to P(0) peptide form with a 1.5 x 10(3) M(-1) intrinsic association constant. Following to Zn(+2) binding, the pK(a) of the amino group of N-terminal Ile-1 is shifted from 7.6 to 5.9 and the Stokes radius is reduced of about 3 A. The mean charge of the bacitracin A(1)-Zn(+2) complex resulted +1.67 and +1.12 at pH 5.50 and 6.72, respectively. These results suggest that the amino group of N-terminal Ile-1 is not essential for Zn(+2) binding.     

双波长分光光度法测定湿法炼锌净化液中的痕量锗

选择水杨基荧光酮－乳化剂ＯＰ－盐酸为显色体系，应用双波长分光光度法扣除硫酸锌的基体干扰，不分离直接测定了湿法炼锌过程中硫酸锌净化液中的痕量锗。测定范围在０－４０ｍｇ／Ｌ。本法应用于株洲冶炼厂锌净化液中锗的测定，结果与该厂长期的萃取－比色法结果相吻合，而测定速度较萃取－比色法至少提高了一倍。     

α,β,γ,δ-四-(羟基苯)卟吩与锌离子络合物光度特性的研究

为探讨羟基苯卟吩与锌离子络合物的光度特性,对三种新合成的卟啉化合物与锌离子的显色反应分别作了研究和比较。实验表明T-(3-HP)P所生成的络合物的灵敏度最高,其表观摩尔吸光系数达4.76×10~5L·mol~(-1)·cm~(-1)。本文还就试剂的分子结构与显色反应的某些规律作了初步的讨论。     

Preconcentration of lead,cadmium, copper and zinc in water at the pg g−1 level by non-boiling evaporation

An evaluation of the non-boiling evaporation technique for the preconcentration of Pb, Cd, Cu, Zn at the pg g^?1 level in water samples is presented. Various improvements were made to allow efficient control of contamination problems at these extremely low concentrations. They include the choice of FEP Teflon for the evaporation containers and the use of sophisticated cleaning, ageing and pre-conditionning procedures. Detailed calibration graphs were obtained down to the sub-pg g^?1 level by processing ultra-low concentration standards. This technique was then applied to the determination of these four metals in snow samples collected in Greenland and Antarctica.     

Modelling of calcium sulphate solubility in concentrated multi-component sulphate solutions

The chemistry of several calcium sulphate systems was successfully modelled in multi-component acid-containing sulphate solutions using the mixed solvent electrolyte (MSE) model for calculating the mean activity coefficients of the electrolyte species. The modelling involved the fitting of binary mean activity, heat capacity and solubility data, as well as ternary solubility data. The developed model was shown to accurately predict the solubility of calcium sulphate from 25 to 95 °C in simulated zinc sulphate processing solutions containing MgSO₄, MnSO₄, Fe₂(SO₄)₃, Na₂SO₄, (NH₄)₂SO₄ and H₂SO₄. The addition of H₂SO₄ results in a significant increase in the calcium sulphate solubility compared to that in water. By increasing the acid concentration, gypsum, which is a metastable phase above 40 °C, dehydrates to anhydrite, and the conversion results in a decrease in the solubility of calcium sulphate. In ZnSO₄–H₂SO₄ solutions, it was found that increasing MgSO₄, Na₂SO₄, Fe₂(SO₄)₃ and (NH₄)₂SO₄ concentrations do not have a pronounced effect on the solubility of calcium sulphate. From a practical perspective, the model is valuable tool for assessing calcium sulphate solubilities over abroad temperature range and for dilute to concentrated multi-component solutions.     

Coordination Chemistry of Acrylamide 4. Crystal Structures and IR Spectroscopic Properties of Acrylamide Complexes with CoII,NiII, and ZnII nitrates

Acrylamide complexes of metal nitrates: [M(O‐OC(NH₂)CHCH₂)_n(H₂O)_m][NO₃]₂ (M = Co( 1 ), Ni( 2 ) (n = 6 and m = 0) and Zn( 3 ) (n = 4 and m = 2)) have been determined by using single crystal X‐ray diffraction analysis. All complexes crystallize in the triclinic space group . The structures of 1 and 2 represent octahedral species [M(AAm)₆]²⁺ (AAm = O‐OC(NH₂)CHCH₂ and M = Co or Ni) and uncoordinated nitrate ions. The structure of 3 involves the octahedral cation [Zn(AAm)₄(H₂O)₂]²⁺ in which the Zn²⁺ environment includes oxygen atoms of four acrylamide and two water molecules that are stabilized using ionic nitrate ions. The observations of the solid‐state IR spectroscopic vibrational frequencies of these acrylamide complexes are in agreement with the crystal structures.     

Synthesis and Structure of a Molecular Zinc Phosphate [(C12H8N2Zn)2(HPO4)(H2PO4)2]

A hydrothermal reaction of a mixture of ZnCO₃, phosphoric acid, 1, 10‐phenanthroline in H₂O gave rise to large plates of a new zinc phosphate, [(C₁₂H₈N₂Zn)₂(HPO₄)(H₂PO₄)₂], I . The structure consists of ZnO₃N₂ distorted trigonal‐bipyramidal and PO₄ tetrahedral units linked through their vertices to give rise to a zero‐dimensional molecular solid (monomer). The structure of the monomer appears to be similar to the secondary building unit (SBU) 4 = 1, commonly found in many fibrous zeolites. To our knowledge, this is the first time this building unit has been isolated. The structure, with a unique composition, is stabilized by hydrogen bond interactions between the terminal —OH groups forms a one‐dimensional molecular wire and also by strong π…π interactions between the 1, 10‐phenanthroline units. Photoluminescence studies show that there is a ligand‐to‐metal charge transfer (LMCT). Crystal data: orthorhombic, space group = Fdd2 (no. 43), a = 40.4669(1), b = 7.4733(2), c = 17.4425(5)Å, V = 5274.9(2)ų, Z = 8.     

Hydrothermal synthesis and structures of two zero-dimensional zinc phosphate polymorphs

Two polymorphs of zero-dimensional zinc phosphate with the formula, ⁰_∞[Zn(2,2′-bipy)(H₂PO₄)₂], have been synthesized employing hydrothermal technique and their structure determined by single crystal X-ray diffraction. Both the structures consists of ZnO₃N₂ distorted trigonal-bipyramidal and PO₂(OH)₂ tetrahedral units linked through their vertices giving rise to a zero-dimensional molecular zinc phosphate. The structures are stabilized by extensive hydrogen bond interactions between zero-dimensional monomers. The structures display subtle differences in their packing created by hydrogen bond interactions. Crystal data: polymorph I, triclinic, space group (No. 2), , , , α=67.32(3)°, β=81.67(3)°, γ=69.29(3)°, , Z=2; polymorph II, triclinic, space group (No. 2), , , , α=97.37(2)°, β=100.54(2)°, γ=100.98(2)°, , Z=2.     

The kinetics of zinc dissolution in nitric acid

The dissolution of zinc in 0.48–1.49M HNO₃ was studied at 15–25°C, by following simultaneously the concentration changes of the reactants (Zn and HNO₃), intermediate (HNO₂) and product (Zn²⁺) with time. Explicit mechanisms were suggested for the dissolution of zinc in nitric acid. The kinetics of the dissolution process show that it is of the first-order with respect to [Zn] and [HNO₂]. The data obtained show that the dissolution process is diffusion-controlled. The mechanism of zinc dissolution is compared with the mechanism of copper dissolution.

---

Die Kinetik der Auflösung von Zink in Salpetersäure

Zusammenfassung Die Auflösung von Zink in 0.48–1.49M HNO₃ wurde bei 15–25°C mittels gleichzeitiger Verfolgung der Konzentrationsänderungen der Reaktanden (Zn und HNO₃), des intermediären HNO₂ und des Produkts Zn²⁺ untersucht. Es wird ein Mechanismus vorgeschlagen. Die Kinetik der Auflösung ist erster Ordnung bezüglich [Zn] und [HNO₂]. Die Daten zeigen, daß der Auflösungsvorgang diffusionskontrolliert ist. Der Mechanismus der Auflösung von Zink wird mit dem der Kupferauflösung verglichen.

     

电感耦合等离子体原子发射光谱法测定杨树叶中铜锌铅镍

研究了电感耦合等离子体原子发射光谱法(ICP-AES)的仪器工作参数,溶液提升速率为2.4 mL.min-1,雾室压力为2.07×105Pa,观测高度为16 mm。用浓硝酸1 mL作样品的消化剂。用此方法测定杨树叶标准物质(GBW 07604)中铜、锌、铅、镍,相对误差在0.54%~9.3%之间,加标回收率在97.9%~101.0%之间。