8-羟基喹啉对甲基苯酚合锌配合物的合成及光致发光和电致发光性能

有机电致发光 ( EL )技术作为一种有着广阔应用前景的显示技术 ,自 1 987年 [1] 以来已获得了空前迅速的发展 .部分发光器件的亮度、效率和寿命已经达到或接近实用化的程度 .许多有机化合物 [2～ 5] ,包括小分子和聚合物 ,已被用于制备有机 LEDs.应用于有机 EL的化合物很多 ,这为优化和筛选优秀的 EL材料提供了基础 .以 8-羟基喹啉铝为代表的有机金属配合物是一类重要的有机 EL材料 ,这类材料荧光效率高、易于提纯且性质比较稳定 .目前应用于有机 EL金属配合物的发光材料大多配位数均为偶数 ,四配位的 8-羟基喹啉锌配合物 ( Znq2 ) [6…     

Structural features of zinc hydroxyfluoride

Zinc hydroxyfluoride (ZnOHF), obtained by coprecipitation of a zinc salt in aqueous HF, exhibits a variable stoichiometry Zn(OH)_2−xF_x, where x is tuneable from 0.63 to 0.87 by controlling the pH of the solution. The structure was determined from Rietveld refinements using X-ray powder diffraction data. Crystallizing with the orthorhombic symmetry (SG : Pna2₁), the ZnOHF-type structure exhibits two different anionic sites. A bond valence analysis shows that fluorine exclusively occupies the anionic site that has shorter contacts to zinc. This site is split into two partially occupied sites, one corresponding to the position of a fluoride ion and the other to the position of a hydroxide ion. Bond valence calculations show that the split site model gives a more accurate picture of the local coordination of the anions on this site.     

甲醇与乙醇一步合成异丁醛用CuO-ZnO/Al2O3催化剂

在ＣｕＯ－ＺｎＯ／Ａｌ２Ｏ３催化剂上，甲醇与乙醇在常压和２１０￣３６０℃温度下一步反应合成异丁醛。利用正交设计方法，研究了ＣｕＯ－ＺｎＯ／Ａｌ２Ｏ３体系催化剂组成和制备条件等因素对催化剂催化性能的影响。结果表明，催化剂中ＣｕＯ含量对催化剂的催化活性影响最大，而ＺｎＯ含量则主要影响催化剂对异丁醛的选择性。催化剂制备条件，如沉淀温度、陈化时间等，也不同程度也影响催化剂的催化性能。ＸＲＤ和ＢＥＴ表征结果     

黄芪中微量锌的测定

用分光光度法测定了黄芪中锌的含量,该法的平均回收率为99.01%.变异系数为1.50%.     

Inorganic-organic hybrids of the p,p′-diphenylmethylenediphosphinate ligand with bivalent metals: a new 2D-layered phenylphosphinate zinc(II) complex

By reaction of Zn(CH₃COO)₂ with p,p′-diphenylmethylenediphosphinic acid in water a new inorganic-organic polymeric hybrid of formula [Zn(CH₂(P(Ph)O₂)₂)] has been synthesized and completely characterized. The X-ray analysis established that the structure consists of 2D-layered polymeric array, the 2D-sheets being built up through strong covalent linkages between the zinc metal and the oxygen donors of the phenylphosphinate ligand. The 2D-layers, which are featuring a mesh-net fashion, present voids of various dimensionality, up to 24-membered rings. The organic parts of the hybrid ligand, namely the phenyl rings, are shielding the inorganic skeleton of the layers, preventing the propagation of the polymer in the third dimension. No water molecules are present in the lattice, both of coordination and crystallization. Crystal data are: monoclinic, P2₁/c, a=11.840(2), b=9.646(9), c=12.516(5) Å, β=95.03(2), V=1423.9(15) Å³, Z=4. The solid material has been characterized by ³¹P MAS NMR spectroscopy and thermogravimetric analysis.     

Thermochromic and solvatochromic zinc biladienones: dynamic equilibria of a metal complex having a flexible framework sensitive to environment

Dehydration of zinc biladienone was catalyzed by zinc acetate, while the reverse reaction was catalyzed by triethylamine. The transformation can be performed thermally without catalyst, and the ratio of the hydrated form to the dehydrated form depended on the solvents: the dehydrated form is favored in CHCl₃ and CH₂Cl₂, while the hydrated form is favored in hexane, pyridine, and DMF. Kinetic studies on the thermal transformation of zinc biladienone from its hydrated blue form to the dehydrated yellow-brown form were performed in toluene and THF. The rate law was half order with respect to the zinc biladienone concentration in toluene, while first order in THF, leading to a slow transformation in concentrated solution in toluene.     

Ungewöhnliche Bildung und Struktur eines O‐Sulfinato‐Zinkkomplexes

Unusual Formation and Structure of a O‐Sulfinato Zinc Complex Whereas the reaction between hydrotris[(N‐xylyl)‐thioimidazolyl]borato‐zinc perchlorate ([ L· Zn‐OClO₃]) and ethanethiolate under an inert atmosphere leads to the thiolate complex [ L· Zn‐SC₂H₅], the same reaction in air produces the sulfinato complex [ L· Zn‐O‐S(O)‐C₂H₅] ( 1 ). 1 is the first fully characterized sulfinato‐zinc complex. Its structure determination has confirmed the unusual coordination of the sulfinato ligand via one of its oxygen atoms.     

新显色剂1－（对－偶氮苯）－3－（2－噻唑）－三氮烯与锌显色反应的研究及应用

本文研究了新显色剂１－（对－偶氮苯）－３－（２－噻唑）－三氮烯在非离子表面活性剂ＴｒｉｔｏｎＸ－１００存在下，与锌（Ⅱ）显色反应的适宜条件。结果表明，在ｐＨ１３．０～１４．０范围内，锌（Ⅱ）与题示试剂形成１：３的稳定粉红色配合物，其最大吸收波长为５４５ｎｍ，试剂的最大吸收波长为４６３ｎｍ。配合物表现摩尔吸光系数在５４５ｎｍ处为９．６×１０￣４Ｌ·ｍｏｌ￣（－１）＊ｃｍ￣（－１）；０～２４μｇ／２５ｍＬＺｎ符合比耳定律。该试剂对锌的选择性良好。方法用于铝合金中锌的直接测定，结果令人满意。     

锌的平面三配位[Bu_4N][Zn(SC_6H_2Pr_3~i-2,4,6)_3]·Pr~iOH配合物的合成与晶体结构

在许多重要的金属蛋白中,都存在ⅡB金属与半胱氨酸残基配位的活性中心M(Cys-S)_n.锌、镉、汞与含硫配体的配位化学作为M(Cys-S)_n中心的化学基础,三配位的[M(SR)_3]被认为是金属蛋白中ⅡB金属的一种配位形式.而近年来,Koch报道了平面三配位的锌、镉、汞的硫酚配合物[(n-Pr)_4N][Zn(SC_6HMe_4-2,3,5,6)_3]和[PPh_4][Cd(SC_6H_2Pr_3~i-2,3,6)_3]及[(n-Pr)_4N][Hg(SC_6H_2Pr_3~i-2,4,6)_3]的晶体结构.他们在实验中由于晶体迅速失去溶剂而未能测定以2,4,6-三异丙基硫酚为配体的锌配合物的晶体结构.最近我们合成了这个配合物,并测定了其晶体结构.