Continuous flow electrolytic cold vapor generation atomic fluorescence spectrometric determination of Hg in water samples

The determination of trace concentrations of Hg in water samples by the use of electrolytic cold vapor generation (ECVG) system and AFS was studied. Several buffer solutions were used and the detection limits with these systems were found to be by a factor of 1–2 lower than in the conventional electrolytic cold vapor generation system. Comparing with the traditional inorganic acid, phosphate buffer solution (PBS) increased the signal intensity of Hg vapor from electrolytic generation on Pt cathode and reduced the impact of cathode erosion on the stability of signal intensity. Moreover, buffer solution has better interference tolerance. The effects of the electrolytic conditions and interference ions on the ECVG have been studied. Under optimized conditions and with PBS as catholyte the detection limit for Hg was found to be 0.27 ng L⁻¹. The relative standard deviation was 2.8% for 11 consecutive measurements of 1 μg L⁻¹ Hg. This method has been applied in the determination of inorganic Hg in Yangtze River water.     

Validation of the thermodynamic model of inorganic arsenic in non polluted river waters of the Basque country (Spain)

The thermodynamic model of inorganic arsenic was validated by comparing the predicted As(III) concentration with the experimentally determined one in several river waters samples of the Basque Country (Spain) collected in two sampling campaigns: spring and autumn 2000. This model takes into account the acid-base equilibria of As(III) and As(V) together with the redox equilibria between the H₃AsO₃ and H₃AsO₄ species. A correct prediction of As(III) concentration requires the knowledge of the total concentration of arsenic, pH, redox potential (referred to hydrogen electrode), and ionic strength values of the solution. The estimation of the activity coefficients of the arsenic species was performed by means of the Modified Bromley’s Methodology (MBM).In order to perform the experimental As(III) determination, an analytical method was implemented by using an ion exchange separation of As(III)/As(V) on a continuous FIA-IE-HG-AAS system. The total arsenic concentration was determined together with total concentration of the main alkaline or alkaline-earth metals and anions in the natural waters. Temperature compensated measurements of the pH and redox potentials were made in-situ at the sampling sites.For both seasonal campaigns, the agreement between predicted and experimental As(III) is really high for those samples belonging to non polluted river waters.     

Rapid automated screening, identification and quantification of organic micro-contaminants and their main transformation products in wastewater and river waters using liquid chromatography-quadrupole-time-of-flight mass spectrometry with an accurate-mass database

In this study we have developed and evaluated an analytical method for a rapid automated screening and confirmation of a large number of organic micro-contaminants (almost 400) and also the quantification of the positive findings in water samples of different types (surface and wastewaters) using liquid chromatography-electrospray quadrupole-time-of-flight mass spectrometry (LC-QTOFMS) based on the use of an accurate-mass database. The created database includes data not only on the accurate masses of the target ions but also on the characteristic in-source fragment ions, isotopic pattern and retention time data. This customized database was linked to commercially available software which extracted all the potential compounds of interest from the LC-QTOFMS raw data of each sample and matched them against the database to search for targeted compounds in the sample. The detailed fragmentation information has also been used as a powerful tool for the automatic identification of unknown compounds and/or transformation products with similar structures to those of known organic contaminants included in the database. The database can be continually enlarged. To confirm identification of compounds which have no fragment ions (or fragments with low intensity/relative abundance) from in-source CID fragmentation or isomers which are not distinguished within full single mass spectra, a "Targeted MS/MS" method is developed. Thereafter, these compounds can be further analyzed using the collision energy (CE) in QTOF-MS/MS mode. Linearity and limits of detection were studied. Method detection limits (MDLs) in effluent wastewater and river waters were, in most cases, lowers or equal to 5 and 2 ng/L, respectively. Only 15 compounds had MDLs between 5 and 50 ng/L in effluent wastewater matrix. We obtained a linearity of the calibration curves over two orders of magnitude. The method has been applied to real samples and the results obtained reveal that most of the pharmaceutically active compounds contained in the created database were present in the water samples with concentrations in the range of ng/L and μg/L levels and in most of the samples between 2 and 15 pesticides of the 300 contained in the database were also detected. In addition to the compounds included in the database, some degradation products were found, thus revealing the method as a useful tool for the analysis of organic micro-contaminants in waters.     

Multiresidue analysis of pollutants as their trimethylsilyl derivatives,by gas chromatography–mass spectrometry

This paper reports a multiresidue analysis procedure which permits the identification and quantification of sixty-three water-soluble pollutants. Subsequent to their solid-phase extraction (SPE) enrichment, analyses of species have been carried out from one solution, by a single injection, as their trimethylsilyl-oxime ether/ester derivatives, by gas chromatography–mass spectrometry, within 31 min. Based on our optimized extraction, derivatization and mass fragmentation studies separation have been performed in the total ion current mode, identification and quantification of compounds have been carried out on the basis of their selective fragment ions. Including various pharmaceuticals, benzoic acid, its substituted species, different aromatic carboxylic acids, cholic acids, unsaturated and saturated fatty acids, aliphatic dicarboxylic acids, as well as synthetic pollutants of various origins (2,4-di-tert-butylphenol, different phthalates). Standard compounds were added to 500 mL effluent wastewater samples, at three concentrations (1–5 μg/L, 5–10 μg/L and 10–20 μg/L). Recoveries, using the Waters Oasis cartridges performing extractions at pH 2, pH 4 and pH 7 proved to be the optimum at pH 4 (average recoveries (94.5%), except for cholesterol (10%), paracetamol (18%) and 2,5-dihydroxybenzoic acid (25%). Carbamazepine could be recovered at pH 7, only. Responses, obtained with derivatized standards proved to be linear in the range of 4–80 μg/L levels. Limit of quantitation values varied between 0.92 ng/L (4-hydroxyphenylacetic acid) and 600 ng/L (dehydrocholic acid) concentrations. One of the most important messages of this work is the confirmation of the origin of blank values. It was shown that contaminants, mainly 2,4-di-tert-butylphenol, different phthalates and fatty acids, are sourced both from the reagents and mainly from the SPE procedure, independent on the cartridge applied. Reproducibilities, characterized with the relative standard deviations (RSDs) of measurements, varied between 0.71% and 10%, with an average of 4.38% RSD. The practical utility of the method was shown by the identification and quantification of the pollutant contents of Hungarian influent and effluent wastewaters (for six consecutive months and that of the Danube River for 2 months).     

A Novel Voltammetric Method for the Determination of Maleic Acid Using Silver Amalgam Paste Electrode

An efficient voltammetric method was developed for the determination of maleic acid at a silver amalgam paste electrode (AgA‐PE) in Britton–Robinson buffer pH 2.0. The experimental parameters, such as pH of Britton–Robinson buffer, type of the supporting electrolyte and activation of the electrode surface were optimized. Under the optimal conditions, a linear response was observed over the 2×10^?6–1×10^?4 mol L^?1 maleic acid concentration range, determination limit being 5×10^?7 mol L^?1. A highly stable response, with a relative standard deviation (RSD) of 1.6% for 45 repetitive measurements of 1×10^?4 mol L^?1 maleic acid showed that there was no apparent surface passivation indicating the suitability of the method. The method was successfully applied for direct determination of maleic acid in drinking and river water.     

水中阴离子表面活性剂的吸附分光光度法测定

研究萘基二苯甲烷与阴离子表面活性剂的缔合反应及缔合物在聚合物颗粒表面的吸附及洗脱 ,提出了碱性艳蓝BO分光光度法测定河水中的阴离子表面活性剂 ;碱性艳蓝BO与十二烷基苯磺酸钠、十二烷基硫酸钠、十二烷基磺酸钠的缔合物的表观摩尔吸光系数分别为3.76×104、3.63×104、2.15×104L·mol -1·cm -1 ,方法的线性范围为0.0～2.0mg/L,相对标准偏差3.8% (n=8);应用该法测定河水中阴离子表面活性剂含量 ,结果令人满意     

长江三角洲地区污水厂污泥中全氟有机酸污染特征

对长江三角洲地区污泥的分析结果表明：脱水剩余污泥中总全氟有机酸（PFAs）的浓度范围为122-1098ng／g,其中三氟乙酸（TFA）和五氟丙酸（PFPrA,除S13未检出外）一般是污染水平最高的两种PFAs,分别为107-562ng／g和4．41-395ng／g,占总PFAs的12％-93％和0．7％-61％,这充分说明在以后的监测中需要将超短链PFAs纳入检测范围．尽管全氟辛酸（PFOA）和全氟辛磺酸（PFOS）的浓度一般低于超短链的TFA和PFPrA,甚至在某些情况下还会低于部分中长链PFCAs,但在绝大多数情况下它们依然是两种主要的PPAs类污染物,浓度分别为2．78-66．9ng／g和1．27-80．4ng／g,占总PFAs的0．7％-8．8％和1％-20％．一般而言,全氟羧酸（PFCAs）的检出率较高,可达92．3％-100％,但是对全氟烷基磺酸（PFSAs）而言,除PFOS的检出率为100％外,全氟丁磺酸（eFBS）和全氟己磺酸（PFHxS）的检出率较低,仅分别为15．4％和7．8％．此外,不同的污水处理工艺可能会严重影响污水处理过程中PFAs污染水平和归趋,造成这种现象的原因可能是不同工艺条件下污泥的吸附性能不同,也可能是不同处理工艺对其前体物的降解转换率不同．     

Extraction of Nonylphenol and Nonylphenol Ethoxylates from River Sediments: Comparison of Different Extraction Techniques

Summary Five different extraction techniques (Soxhlet, automated Randall, accelerated solvent extraction, microwave-assisted solvent extraction and extraction with a surfactant solution) have been evaluated for the determination of nonylphenol (NP) and nonylphenol ethoxylates (NPEO) in river sediments. All the techniques were applied to the same three samples collected from northern Italian rivers. The analyses were performed with two RP columns, with different stationary reversed phases—a classical C₁₈ phase and a hexyl–phenyl phase. The recoveries and reproducibility of the different extraction techniques were comparable and all the methods gave reliable results. The variance of the results was dominated by the variance in sample homogeneity, sample preparation, and chromatographic analysis. A choice between the methods can be made on the basis of the cost and safety of each technique. Preliminary results obtained from use of a water-based extraction method with a surfactant solution (Tween-80), and its application to analysis of sediment and of worm tissue, are also presented.Presented at: Chemical Analysis and Risk Assessment of Emerging Contaminants, Barcelona, Spain, November 28–30, 2002     

Synergistic Effect of Lithium Perchlorate and Sodium Hydroxide in the Preparation of Electrochemically Treated Pencil Graphite Electrodes for Selective and Sensitive Bisphenol A Detection in Water Samples

In this study, pencil graphite electrodes were activated electrochemically in the presence of different supporting electrolytes and used for the selective and sensitive determination of bisphenol A (BPA) in water samples. Synergistic effects of both LiClO₄ and NaOH supporting electrolytes on the performance of the electrochemically treated pencil graphite electrode (ETPGE) were demonstrated in the oxidation of BPA. The electrochemical behavior of BPA on the ETPGE showed two irreversible oxidation peaks at 0.744 V and 0.877 V (vs. SCE). The detection limit was determined to be 3.1 nM. This single‐use electrode is a very promising candidate to overcome the passivation problems arising from the oxidation of BPA. The analytical application of the ETPGE was performed in tap and river water samples.     

Separation and determination of homogenous fatty alcohol ethoxylates by liquid chromatography with mulitstage mass spectrometry

Alcohol ethoxylates (AEs) are a significant component of a stream of surfactants directed to the aquatic environment. The aim of this work was the investigation of the dependence of the analytical signals of homogeneous AE homologues on liquid chromatography with tandem mass spectrometry conditions, as well as the separation of AEs from the water matrix and, on this basis, the development of an analytical procedure suitable for the determination of AEs in environmental samples. Homogeneous homologues containing dodecyl moiety and 2–9 oxyethylene subunits were investigated. The analytical signals of the investigated homologues were optimized in terms of concentration of ammonium acetate in the mobile phase (optimum 5 mM) and a column temperature (optimum 35°C) of the liquid chromatography with tandem mass spectrometry system. A separation of AEs from the water matrix by liquid–liquid extraction (ethyl acetate, chloroform) or solid‐phase extraction (C₁₈, styrene divinylbenzene, H‐RX) was investigated. In a model investigation, the best recoveries (>90%) were obtained with a styrene divinylbenzene cartridge eluted with a 1:1 mixture of chloroform and methanol. However, much worse recoveries were obtained from the river water sample. Better results were obtained for liquid–liquid extraction with ethyl acetate. Recoveries of 62–80% were obtained for homologues having 4–9 oxyethylene subunits, at the lowest spike.