动力学荧光法分析痕量碘的研究

基于在磷酸介质中，碘能催化过碘酸钾氧化罗丹明6G的反应，使荧光猝灭，建立了催化荧光法测定痕量碘的新方法。方法的检出限为0．019mg/L，线性范围为0．020mg/L-0.80mg/L，可直接用于加碘食盐、海带、紫菜和盐酸胺碘酮药片中碘的测定。     

A new approach to the synthesis of α-chlorocycloalkanones

α-Chlorocycloalkanones(Ⅳ) were synthesized from cycloalkanones via potassiumα-oxocycloalkylsulfonates(Ⅱ).A two-step mechanism was proposed to explain the formation ofⅣfromⅡ.     

催化光度法测定痕量甲醛

基于磷酸介质中甲醛催化溴酸钾氧化溴甲酚紫的褪色反应 ,建立了测定痕量甲醛的方法。方法的检出限为 1.0× 10 - 5g·L- 1,线性范围为 0 .0 2 0～ 0 .4 8μg·ml- 1,方法简便 ,用于空气中测定痕量甲醛 ,结果满意。     

Silica supported potassium oxide catalyst for dehydration of 2-picolinamide to form 2-cyanopyridine

The dehydration of 2-picolinamide to produce 2-cyanopyridine was investigated thoroughly using silica supported potassium oxide as a heterogeneous catalyst. Both large specific surface area and pore size of SiO_2 (B) contributed to the favorable catalytic performance for the synthesis of 2-CP. In addition, the yield of 2-CP showed the linear relationship with the amounts of medium basicity of the catalysts,demonstrating that medium basic sites were the active sites of silica supported potassium oxide catalysts. The catalysts were further characterized by XRD and FT-IR to clarify the active species. The results indicated the Si—O—K group produced by the reaction of K_2CO_3 with Si—OH was the active species, which was further evidenced by the adjustment of the amount of Si—OH by silylation and hydroxylation procedure.     

The role of salt on cellulose dissolution in ethylene diamine/salt solvent systems

Ethylene diamine (EDA)/salt solvent systems can dissolve cellulose without any pretreatment. A comparison of the electrical conductivity of different salts in EDA was made at 25 °C, and conductivity decreased in the order of KSCN>KI>NaSCN at the same molar concentration. Among the salts tested, potassium thiocyanate (KSCN) was capable of dissolving both high molecular weight (DP>1000) and low molecular weight (DP = 210) cellulose, and this was confirmed by polarized light microscopy. ³⁹K and ¹⁴N NMR experiments were conducted at 70 °C as a function of cellobiose concentration with EDA/KSCN as the solvent. The results showed that the K⁺ ion interacts with cellobiose more than the SCN⁻ ion does. Recovered cellulose was studied by infrared spectroscopy (FTIR) and wide angle X-ray diffraction (WAXD). Changes in the FTIR absorption bands at 1,430 and 1,317 cm⁻¹ were associated with a change in the conformation of the C-6CH₂OH group. The changes in positions and/or intensities of absorption bands at 2,900, 1,163, and 8,97cm⁻¹ were related to the breaking of hydrogen bonds in cellulose. X-ray diffraction studies revealed that cellulose, recovered by precipitating cellulose solutions with water, underwent a polymorphic transformation from cellulose I to cellulose II.     

Application of manganese(IV) dioxide microcolumn for determination and speciation of nitrite and nitrate using a flow injection analysis-flame atomic absorption spectrometry system

A flow injection (FI) method with flame atomic absorption spectrometry (FAAS) detection was developed for the determination and speciation of nitrite and nitrate in foodstuffs and wastewaters. The method is based on the oxidation of nitrite to nitrate using a manganese(IV) dioxide oxidant microcolumn where the flow of the sample through the microcolumn reduces the MnO₂ solid phase reagent to Mn(II), which is measured by FAAS. The absorbance of Mn(II) are proportional to the concentration of nitrite in the samples. The injected sample volume was 400 μL with a sampling rate of analyses was 90 h⁻¹ with a relative standard deviation better than 1.0% in a repeatability study. Nitrate is reduced to nitrite in proposed FI-FAAS system using a copperized cadmium microcolumn and analyzed as nitrite. The calibration curves were linear up to 20 mg L⁻¹ and 30 mg L⁻¹ with a detection limit of 0.07 mg L⁻¹ and 0.14 mg L⁻¹ for nitrite and nitrate, respectively. The results exhibit no interference from the presence of large amounts of ions. The method was successfully applied to the speciation of nitrite and nitrate in spiked natural water, wastewater and foodstuff samples. The precision and accuracy of the proposed method were comparable to those of the reference spectrophotometric method.     

Palladium-catalyzed Suzuki-Miyaura couplings of potassium aryl trifluoroborates with 4-tosyloxycoumarins or 4-tosyloxyquinolin-2(1H)-one

Pd(PPh₃)₄ catalyzed Suzuki-Miyaura cross-coupling reactions of 4-tosyloxycoumarins or 4-tosyloxyquinolin-2(1H)-one with various potassium aryl trifluoroborates afforded the corresponding 4-substituted coumarins or 4-substituted quinolin-2(1H)-ones in good to excellent yield.     

Synthesis and crystal structure of the palladium oxides NaPd3O4, Na2PdO3 and K3Pd2O4

NaPd₃O₄, Na₂PdO₃ and K₃Pd₂O₄ have been prepared by solid-state reaction of Na₂O₂ or KO₂ and PdO in sealed silica tubes. Crystal structures of the synthesized phases were refined by the Rietveld method from X-ray powder diffraction data. NaPd₃O₄ (space group Pm3¯n, a=5.64979(6) Å, Z=2) is isostructural to NaPt₃O₄. It consists of NaO₈ cubes and PdO₄ squares, corner linked into a three-dimensional framework where the planes of neighboring PdO₄ squares are perpendicular to each other. Na₂PdO₃ (space group C2/c, a=5.3857(1) Å, b=9.3297(1) Å, c=10.8136(2) Å, β=99.437(2)°, Z=8) belongs to the Li₂RuO₃-structure type, being the layered variant of the NaCl structure, where the layers of octahedral interstices filled with Na⁺ and Pd⁴⁺ cations alternate with Na₃ layers along the c-axis. Na₂PdO₃ exhibits a stacking disorder, detected by electron diffraction and Rietveld refinement. K₃Pd₂O₄, prepared for the first time, crystallizes in the orthorhombic space group Cmcm (a=6.1751(6) Å, b=9.1772(12) Å, c=11.3402(12) Å, Z=4). Its structure is composed of planar PdO₄ units connected via common edges to form parallel staggered PdO₂ strips, where potassium atoms are located between them. Magnetic susceptibility measurements of K₃Pd₂O₄ reveal a Curie-Weiss behavior in the temperature range above 80 K.     

A theoretical study of five nitrates: Electronic structure and bond dissociation energies

Three density-functional methods (B3P86, B3PW91, and B3LYP) are employed to investigate the O–NO₂ bond lengths, frontier orbital energies, and O–NO₂ bond dissociation energies (BDEs) of n-propyl nitrate (NPN), isopropyl nitrate (IPN), 2-ethylhexyl nitrate (EHN), triethylene glycol dinitrate (Tri-EGDN), and tetraethylene glycol dinitrate (Tetra-EGDN). It is found that the O–NO₂ bond lengthens (destabilizes) in the order of IPN, NPN, EHN, Tetra-EGDN, and Tri-EGDN. From the data of frontier orbital energies (E_HOMO, E_LUMO), and energy gaps (ΔE), we estimate the relative thermal stability ordering of five nitrates and their corresponding radicals. The predicted BDEs of O–NO₂ bond in NPN, IPN, EHN, Tri-EGDN, and Tetra-EGDN, are 176.6, 174.5, 168.1, 156.1, and 159.3 kJ mol⁻¹, respectively. Based on the finding that the present results of BDEs are well coincident with the experimental results of apparent activation energies from the literature, we can draw a conclusion that the experimental thermolysis of five nitrates is only unimolecular homolytical cleavage of the O–NO₂ bonds.     

钛酸钾晶须界面性质研究

通过乳液聚合的方法对钛酸钾晶须进行表面改性,获得了表面包裹聚甲基丙烯酸甲酯的钛酸钾晶须. FT-IR、SEM、EDS的表征表明,钛酸钾晶须的表面包裹了聚甲基丙烯酸甲酯膜,形成了以钛酸钾晶须为核,聚甲基丙烯酸甲酯为壳的复合粒子.研究表明,改性后的晶须表面能降低,在有机溶液中的界面张力大大降低,与聚甲基丙烯酸甲酯的界面性质相似,说明改性后的晶须基本被聚甲基丙烯酸甲酯完全包裹,因此晶须由亲水性变为疏水性,在有机溶液中的分散性显著提高.