Thermal characterization and solid‐state 13C‐NMR investigation of blends of poly(N‐phenyl‐2‐hydroxytrimethylene amine) and poly(N‐vinyl pyrrolidone)

The miscibility and thermal properties of poly(N‐phenyl‐2‐hydroxytrimethylene amine)/poly(N‐vinyl pyrrolidone) (PHA/PVP) blends were examined by using differential scanning calorimetry (DSC), high‐resolution solid‐state nuclear magnetic resonance (NMR) techniques, and thermogravimetric analysis (TGA). It was found that PHA is miscible with PVP, as shown by the existence of a single composition‐dependent glass transition temperature (T_g) in the whole composition range. The DSC results, together with the ¹³C crosspolarization (CP)/magic angle spinning (MAS)/high‐power dipolar decoupling (DD) spectra of the blends, revealed that there exist rather strong intermolecular interactions between PHA and PVP. The increase in hydrogen bonding and in T_g of the blends was found to broaden the line width of CH—OH carbon resonance of PHA. The measurement of the relaxation time showed that the PHA/PVP blends are homogeneous at least on the scale of 1–2 nm. The proton spin‐lattice relaxation in both the laboratory frame and the rotating frame were studied as a function of the blend composition, and it was found that blending did not appreciably affect the spectral densities of motion (sub‐T_g relaxation) in the mid‐MHz and mid‐KHz frequency ranges. Thermogravimetric analysis showed that PHA has rather good thermal stability, and the thermal stability of the blend can be further improved with increasing PVP content. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 237–245, 1999     

Schiff碱N-氧化吡啶-2-甲醛缩氨基硫脲的晶体结构

合成了标题Ｓｃｈｉｆｆ碱并获得了其单晶,化学式为Ｃ７Ｈ８Ｎ４ＯＳ,Ｍｒ＝ １９６．２３,经Ｘ射线单晶衍射分析,该晶体属于单斜晶系,空间群为Ｃ２／ｃ,晶胞参数： ａ＝ １３．１９８（２）,ｂ＝ ８．０７０（１）,ｃ＝ １６．９９９（２）,β＝ １０２．７６０（１０）°,Ｖ＝ １７６５．８（４）３,Ｚ＝ ８,Ｄｃ＝１．４７６ｇ／ｃｍ ３,μ＝ ０．３３０ｍ ｍ － １,Ｆ（０００）＝ ８１６,在２．４６°＜ θ＜ ２９．００°范围内以ω扫描方式收得独立衍射点２３４７ 个,其中Ｉ＞ ２σ（Ｉ）的可观测点为１６８７ 个。最终偏离因子Ｒ＝０．０３４４,ｗ Ｒ＝ ０．０８４３,（Δ／σ）ｍ ａｘ＝ ０．００１,Ｓ＝ １．０８２。分子为平面构型。与相应配合物的晶体结构进行了比较并讨论了配位前后标题化合物主要的键性质的变化。     

N235—混合醇萃取分离稀土中的铁和铅

随着稀土在荧光和激光材料等领域的应用,对稀土纯度的要求越来越高,尤其是对非稀土杂质的含量要求越来越低。对稀土中非稀土杂质的分离去除,已有许多研究报导[1-3]。多是利用萃取剂对稀土和非稀土杂质的萃取能力不同而达到去除目的。分离因素较小,萃取级数都在20多级以上?..     

Spherical Particles of Zirconia-Titania of Hexagonal Structure from a Neutral Amine Route

Through the sol–gel process, using the so-called neutral amine route, spherical particles of 1:1 zirconia–titania were synthesized from zirconium(IV) and titanium(IV) butoxides as well as 1,12-diaminododecane as precursor species. The obtained product exhibited a hexagonal structure, as determinated by X-ray diffraction data. The obtained material was also characterized by thermogravimetry, differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy, and surface area measurements. Despite the release of template molecules on heating, the spherical morphology was retained up to about 1200°C, at which the disruption of the spheres took place.     

在线（氢—钯）色谱—质谱联用法研究分散黄RGFL中的芳胺

研究了一种检测偶氮染料中芳胺的新方法，对分散黄进行了在线（氢－钯）色谱－质谱联用分析，测出了芳胺组分，并对两种催化还原装置进行了比较。     

一氧化二氮—乙炔火焰原子吸收法测定镍—镉浸渍液中硅

提出用一氧化二氮-乙炔火焰原子吸收法分析镍-镉浸渍液中硅.方法具有良好的灵敏度,干扰少,重现性好.硅量在5～50μg.ml~(-1)范围内与吸光度呈线性关系.测定样品中硅34.0μg.ml~(-1)(n=10)时,相对标准偏差为2.2%.标准加入回收率在98%～103%范围内,适用于镍-镉浸渍液中硅的分析.     

Surface modification of γ-alumina membranes by silane coupling for CO2 separation

Top layers of γ-Al₂O₃ composite membranes have been modified by the silane coupling technique using phenyltriethoxysilane for improving the separation factor of CO₂ to N₂. The separation efficiency of the modified membranes was strongly dependent upon the hydroxylation tendency of the support materials and the amount of the special functional group (i.e. phenyl radical) which was coupled onto a top layer. The separation factor through the TiO₂ supported γ-Al₂O₃ membrane was found to be fairly enhanced by silane coupling, but in case of the -Al₂O₃ supported membrane was not. The CO₂/N₂ separation factor through the modified γ-Al₂O₃/TiO₂ composite membrane is 1.7 at 90°C and ΔP = 2 × 10⁵ Pa for the binary mixture containing 50 vol% CO₂. The separation factor is proportional to the CO₂ concentration in the gas mixture, and the modified membrane is stable up to 100°C. The main mechanism of the CO₂ transport through the modified γ-Al₂O₃ layer is known to be a surface diffusion.     

Moleküle mit ungewöhnlich langen N(sp2)–Si(sp3)-Bindungen: Synthese und Kristallstrukturen von 1,2-Benzoldisulfonylaminosilanen

Polysulfonylamines. XCIV. Molecules with Unusually Long N(sp²)–Si(sp³) Bonds: Synthesis and Crystal Structures of 1,2-Benzenedisulfonylaminosilanes The following compounds were obtained by metathesis of silver 1,2-benzenedisulfonimide (AgZ) with the appropriate chlorosilanes: ZSiMe₃ ( 4 ), ZSiⁿPr₃, ZSiMe₂ⁿBu, ZSiMe₂(CMe₂–CHMe₂) ( 7 ), (Z)₂SiMe₂ ( 8 ). In the crystal structures of 4 (monoclinic, space group P2₁/n), 7 (monoclinic, P2₁/c) and 8 (monoclinic, P2₁/n), which were determined by low-temperature X-ray diffraction, the molecules adopt the N-silyl form and display unusually long bonds between the trigonal-planar N and the tetrahedrally coordinated Si atoms ( 4 : 182.6, 7 : 184.1, 8 : 177.8 and 180.5 pm). For 7 in CDCl₃ solution, ¹H and ¹³C NMR data indicate N,O-silylotropy. The solid state structures of molecules 4 and 7 strongly suggest that the N–Si bond lengthening in N,N-disulfonylated aminosilanes is mainly induced by the π-acceptor character of the SO₂ groups and not by the occasionally observed coordination expansion of the Si atom through short intramolecular O…Si contacts.     

A μ-1,1,1,3,3,3 Azide Anion inside a Trigonal Prism of Silver Centers

Layers of face- and edge-sharing trigonal Ag ₆ prisms , of which half are filled with azide units, are contained in the novel compound AgN₃⋅2 AgNO₃ (see structure). Pendant η¹-nitrate groups are attached to both sides of each layer.     

Anionic synthesis of aromatic amide and carboxyl functionalized polymers. Chain-end functionalization of poly(styryl)lithium with N,N-diisopropyl-4-(1-phenylethenyl)benzamide

The novel syntheses of N,N-diisopropyl-4-benzoylbenzamide, N,N-diisopropyl-4-(1-hydroxy-1-phenylethyl)benzamide, and N,N-diisopropyl-4-(1-phenylethenyl)benzamide ( 1 ) are described. ω-Amidopolystyrene ( 2 ) was synthesized in quantitative yields by the reaction of poly(styryl)lithium with stoichiometric amounts of N,N-diisopropyl-4-(1-phenylethenyl)benzamide ( 1 ) in toluene/tetrahydrofuran (4 : 1 v/v) at −78°C. Deblocking of the amide protecting group by acid hydrolysis quantitatively provides the corresponding aromatic carboxyl chain-end functionalized polystyrene ( 3 ). The functionalization agent and functionalized polymers were characterized by HPLC, thin-layer chromatography, size exclusion chromatography, vapor phase osmometry, spectroscopy (¹H-NMR, ¹³C-NMR, and FTIR), potentiometry, and elemental analysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1233–1241, 1998