Crystal structure, oxidation state and magnetism of La1.2Sr2.4RuO7: a new member of the [A2O][AnBn−1O3n] series of hexagonal perovskites

Single crystals of the new compound La_1.2Sr_2.4RuO₇, an oxide related to the hexagonal perovskites, were grown from a BaCl₂ flux. The structure was solved by single crystal X-ray diffraction. La_1.2Sr_2.4RuO₇ crystallizes in the space group with a=5.760(1) Å and c=18.273(3) Å. It is one of the rare examples of oxides with isolated RuO₆-octahedra. The structure consists of alternating layers of RuO₆-octahedra and trigonal (La,Sr)O₆-prisms. These prisms are capped by one additional oxygen ion, which occupies a distorted position within the (La,Sr)O₆-layers. La_1.2Sr_2.4RuO₇ is the second member of the general [A₂O][A_nB_n−1O_3n] family of hexagonal perovskites with n=2 and the first ruthenate possessing this structure. XANES investigations, bond valence sum calculations and magnetic measurements show that ruthenium takes the oxidation state +5. Although the ruthenium ions have quite long distances, a medium strong antiferromagnetic interaction between these paramagnetic centers was observed.     

A downsized flow set up based on multicommutation for the sequential photometric determination of iron(II)/iron(III) and nitrite/nitrate in surface water

In this work, a downsized flow set up designed based on multicommutation concept for photometric determination of iron(II)/iron(III) and nitrite/nitrate is surface water is described. The flow system network comprised a set of three-way solenoid valves, reaction coil and a double-channel flow cell, which were nested in order to obtain a compact and small-size instrument. To accomplish the downsizing requirement light source (LED) and radiation detection (phototransistor) were coupled to the flow cell. In order to demonstrated the effectiveness of the system, the photometer methods based on Griess reaction and 1-10-phenantroline for nitrite and iron(II) determination, respectively, were selected. Under computer control the set up provided facilities to handle four reagent solutions employing a single pumping channel, thus permitting also the determination of nitrate and iron(III) after its reduction to nitrite and to iron(II), respectively. The overall system performance was demonstrated working several days running standard solution, no significant variation of base line, linear response range and slop (less than 1%) were observed. The usefulness of the downsized system was ascertained by analyzing a set of surface water. Aiming to access the accuracy sample were also analyzed employing reference procedures and no significant difference at 95% confidence level were observed for the four analytes. Other profitable features such as analytical throughput of 40 determination per hour; relative standard deviation of 1%; linear response range between 50 and 300 μg l⁻¹ for nitrite and nitrate, 0.5-6.0 mg l⁻¹ iron(II) and iron(III); low reagent consumption 75 μg for nitrate/nitrite and 0.6 mg for iron(II)/iron(III) per determination; and 2.4 ml waste generation per determination were also achieved.     

Synthesis, molecular and crystal structure of bis(triethanolamine)manganese(II) saccharinate: a seven-coordinate manganese complex with tri- and tetradentate triethanolamine ligands

The synthesis, molecular and crystal structure of bis(triethanolamine)Mn(II) saccharinate, [Mn(tea)₂](sac)₂ are reported. The configuration of the tea ligands results in an unusual example of coordination number seven for the Mn(II) ion. The two triethanolamine (tea) ligands coordinate to the Mn(II) ion forming a monocapped trigonal prism geometry, in which one of the tea ligands behaves as a tridentate ligand, while the other one acts as a tetradentate donor. The free and coordinated hydroxyl hydrogens of the tea ligands are involved in hydrogen bonding with the amine nitrogen, carbonyl and sulfonyl oxygens of the neighbouring sac ions to form a three-dimensional infinite network. A weak π–π interaction between the phenyl rings of the sac ions also occurs.     

对甲烷氧化偶联W－Mn／SiO＿2催化剂Na＿2WO＿4的流失及其影响的考察

用ＸＲＤ、ＦＴ－ＩＲ、ＥＳＲ、Ｈ２－ＴＰＲ和ＴＰＯ等方法，对Ｎａ２ＷＯ４－Ｍｎ２Ｏ３／ＳｉＯ２催化剂和其经水煮处理的一系列样品进行了表征．实验发现该催化剂中的结晶态Ｎａ２ＷＯ４易于流失，单层分布的Ｎａ２ＷＯ４在苛刻的处理条件下也有可能流失．依此，探讨了上述流失现象与Ｎａ２ＷＯ４－Ｍｎ２Ｏ３／ＳｉＯ２催化剂的催化活性及该催化剂在长时间反应中发生的ＳｉＯ２相变之间的关系，证明了结晶态Ｎａ２ＷＯ４的流失对该催化剂甲烷氧化偶联反应的催化活性只有轻微的影响，单层分布Ｎａ２ＷＯ４的流失可造成催化剂中Ｍｎ从Ｍｎ３＋转变为Ｍｎ２＋，并使催化剂的催化活性明显降低．但在水煮条件下，无论是结晶态的还是单层分布，Ｎａ２ＷＯ４的流失都没有对ＳｉＯ２的α－方石英结构产生影响     

硫化锌掺锰/聚乙烯醇复合纳米纤维的制备与表征

利用静电纺丝法与气固反应相结合, 成功地制备了硫化锌掺锰/聚乙烯醇复合纳米纤维, 并对所制备的复合物进行了表征, 探讨了复合物的结构及其性能.     

LiMn2O4的湿法合成及锰的光度法测定研究

The LiMn₂O₄ spinel was prepared by wet method using Li₂CO₃， Mn(CH₃COO)₂·4H₂O and CO₂ as raw ma-terials. The products were measured by TG/DTA， XRD， IR. The results Showed that the sample calcined at 800℃ for 10h was well crystallized monophase product. The contents of Mn(Ⅲ) and Mn(Ⅳ) of LiMn₂O₄ spinel were determined simultaneously by spectrophotometric analysis with pyrophosphoric acid.     

Voltammetric and X-ray diffraction analysis of the early stages of the thermal crystallization of mixed Cu,Mn oxides

Mixed Cu,Mn, Cu,Mn,Al, Cu,Mg,Mn, and Cu,Mg,Mn,Al oxides were obtained by calcination of amorphous basic carbonate (Cu,Mn oxides) or hydrotalcite-like precursors at 300–800 °C. The product composition was characterized by chemical analysis, XRD, and voltammetry of the microparticles. The XRD amorphous portion was detected indirectly by XRD and directly by voltammetry. Tenorite (CuO) and spinels were the main crystalline components of the oxide mixtures. The presence of Al shifted the onset of the crystallization of XRD-detectable tenorite and spinel to temperatures higher by 100–200 °C, and the presence of Mg shifted tenorite crystallization by 100 °C, but voltammetry was able to detect these phases even in XRD-amorphous or nanocrystalline calcines. Voltammetry is hence suitable for analysis of poorly crystalline oxides that can be used in heterogeneous catalysis.     

Zirconia supported La, Co oxides and LaCoO3 perovskite: structural characterization and catalytic CO oxidation

ZrO₂-supported La, Co oxide catalysts with different La, Co loading (2, 6, 8, 12 and 16 wt.% as LaCoO₃) were prepared by impregnation of tetragonal ZrO₂ with equimolar amounts of La and Co citrate precursors and calcination at 1073 K. The catalysts were characterized by X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), and BET specific surface area determination. Catalytic CO oxidation was performed at 298–800 K. XRD revealed the presence of tetragonal zirconia with traces of the monoclinic phase. LaCoO₃ perovskite was also detected for loading higher than 6%. XAS experiments suggested that at high loading LaCoO₃ and Co₃O₄ were formed, while at low loading, La, Co oxide species interacting with support, and hard to be structurally defined, prevailed. The catalysis study evidenced that the catalytic activity was due to segregated and highly dispersed cobalt oxide species.     

Effect of phosphorus flame retardants on thermo-oxidative decomposition of cotton

The effect of six organophosphorus compounds, including Pyrovatex CP (PCP), diammonium phosphate (DAP), phosphoric acid (PA), tributyl phosphate (TBP), triallyl phosphate (TAP) and triallyl phosphoric triamide (TPT) on the flame retardancy of cotton cellulose was studied. PCP, PA, and DAP are more efficient compared with the other three compounds in improving the limiting oxygen index (LOI) of cotton. The effectiveness of these compounds was investigated using scanning electron microscope (SEM) images of char formed after LOI tests, char content, activation energy of decomposition and heat of combustion data. SEM images showed that DAP, PCP and PA chars maintain the surface morphology during the burning process, which might be due to the formation of a protective layer or crosslinking effect. PA, PCP, and DAP treated fabrics have a higher activation energy of decomposition, higher char content and lower heat of combustion.