Ultrafast all-optical XOR logic gate based on a symmetrical Mach-Zehnder interferometer employing SOI waveguides

We present an integrated Silicon-on-Insulator (SOI) based Mach-Zehnder interferometer (MZI) in order to perform ultrafast all-optical XOR logic gate operation with a bit rate of ∼ 0.33 Tb/s. A numerical simulation is carried out in order to study various parameters such as extinction ratio and eye-opening parameters, characterizing the performance of the XOR logic gate. The output XOR logic gate signal can have improved extinction and eye margin if the initial powers of primary signals and the probe continuous-wave (CW), and SOI waveguide length are judiciously adjusted.     

Ultra-low-loss inverted taper coupler for silicon-on-insulator ridge waveguide

An ultra-low-loss coupler for interfacing a silicon-on-insulator ridge waveguide and a single-mode fiber in both polarizations is presented. The inverted taper coupler, embedded in a polymer waveguide, is optimized for both the transverse-magnetic and transverse-electric modes through tapering the width of the silicon-on-insulator waveguide from 450 nm down to less than 15 nm applying a thermal oxidation process. Two inverted taper couplers are integrated with a 3-mm long silicon-on-insulator ridge waveguide in the fabricated sample. The measured coupling losses of the inverted taper coupler for transverse-magnetic and transverse-electric modes are ∼ 0.36 dB and ∼ 0.66 dB per connection, respectively.     

A joint measurement of efficiency and effectiveness for non-storable commodities: Integrated data envelopment analysis approaches

Efficiency and effectiveness for non-storable commodities represent two distinct dimensions and a joint measurement of both is necessary to fully capture the overall performance. This paper proposes two novel integrated data envelopment analysis (IDEA) approaches, the integrated Charnes, Cooper and Rhodes (ICCR) and integrated Banker, Charnes and Cooper (IBCC) models, to jointly analyze the overall performance of non-storable commodities under constant and variable returns to scale technologies. The core logic of the proposed models is simultaneously determining the virtual multipliers associated with inputs, outputs, and consumption by additive specifications for technical efficiency and service effectiveness terms with equal weights. We show that both ICCR and IBCC models possess the essential properties of rationality, uniqueness, and benchmarking power. A case analysis also demonstrates that the proposed novel IDEA approaches have higher benchmarking power than the conventional separate DEA approaches. More generalized specifications of IDEA models with unequal weights are also elaborated.     

A dynamic pricing approach for returned products in integrated forward/reverse logistics network design

During the last decade, the stringent pressures from environmental and social requirements have spurred an interest in designing a reverse logistics network. In this paper, we address the problem of designing and planning a multi-echelon, multi-period, multi-commodity and capacitated integrated forward/reverse logistics network. Returned products are categorized with respect to their quality levels, and a different acquisition price is offered for each return type. Furthermore, the reservation incentive of customers, the expected price of customers for one unit of used product described by uniform distribution, is applied to model the customers’ return willingness. Due to the fact that the remaining worthwhile value in the used products is the corporation’s key motivation for buying them from customers, a dynamic pricing approach is developed to determine the acquisition price for these products and based on it determine the percentage of returned products collected from customer zones. The used products’ acquisition prices at each time period are determined based on the customers’ return willingness by each collection center.     

软X射线分光晶体KAP的反射率特性

弯晶谱仪是激光等离子体软X射线的有效诊断工具,KAP是弯晶谱仪的分光晶体之一.利用原子散射因子和结构因子分量,以及镶嵌晶体模型计算KAP的积分反射率,表明KAP的积分反射率与波长有关,先随波长增大而减小,后随波长增大而增大.此外,还计算了KAP的峰值反射率、半最大值宽度、能量宽度和能量分辨率,表明峰值反射率和能量分辨率随波长增大而减小.     

Production of Bio-hydrogen Using Bio-oil as a Potential Biomass-derived Renewable Feedstock

The bio-oil derived from pyrolysis of straw can be selectively converted into high-purity hydrogen by coupling three steps:(i)steam refonning(SR)of di tierent bio-oils,(ii)water-gas shift(WGS),and(iii)the removal of CO2.the catalytic SR reaction over the NiLaTiAl catalyst,coupled with a low-temperature WGS reaction with the CuZnAl catalyst,promoted the conversion of various oxygen-contaming organic compounds in the bio-oil into hydrogen and carbon dioxide.Under the optimized condition,light bio-oil achieved the highest conversion(99.8%,molar fraction),with a high hydrogen yield of 16.4%(mass traction)and a H2 purity of 99.94%(volume fraction).The carbon deposition on the NiLaTiAl catalyst was the main factor caused catalyst deactivation.Production of hydrogen from different bio-oil model compounds was also investigated in detail.     

Network analysis based on low-rank method for mining information on integrated data of multi-cancers

The noise problem of cancer sequencing data has been a problem that can’t be ignored. Utilizing considerable way to reduce noise of these cancer data is an important issue in the analysis of gene co-expression network. In this paper, we apply a sparse and low-rank method which is Robust Principal Component Analysis (RPCA) to solve the noise problem for integrated data of multi-cancers from The Cancer Genome Atlas (TCGA). And then we build the gene co-expression network based on the integrated data after noise reduction. Finally, we perform nodes and pathways mining on the denoising networks. Experiments in this paper show that after denoising by RPCA, the gene expression data tend to be orderly and neat than before, and the constructed networks contain more pathway enrichment information than unprocessed data. Moreover, learning from the betweenness centrality of the nodes in the network, we find some abnormally expressed genes and pathways proven that are associated with many cancers from the denoised network. The experimental results indicate that our method is reasonable and effective, and we also find some candidate suspicious genes that may be linked to multi-cancers.     

Splitting-on-demand optical power splitters using multimode interference (MMI) waveguide with programmed modulations

Reconfigurable multi-channel optical power splitter is proposed and its optical properties are calculated. The device can dynamically reconfigure the number of splitting channels by providing programmed refractive index modulations on a multimode interference (MMI) waveguide. A reconfigurable 3-channel optical power splitter is designed to work as 1 × 1, 1 × 2 or 1 × 3 optical power splitter depending on the state of the heat electrodes using thermo-optic modulation, and the input light can be distributed to three output channels with sequential orders. The device can work in the whole C-band (1530-1565 nm) with extinction ratio better than −29.0 dB, excess loss better than −0.45 dB, imbalance better than 0.08 dB and polarization dependent loss (PDL) better than 0.14 dB. The design conception is scalable to a multi-channel splitting-on-demand optical power splitter which can divide input light to 1, 2, …, N output channels equally by using the 3-channel reconfigurable optical power splitter as a building block.     

An integrated optical coupler used in a fibre interferometry system for on-line surface measurements

In this paper, an integrated optical (IO) coupler produced using the technique of silica-on-silicon was described. A fibre interferometry system using the IO coupler was then developed and its performance was tested. The environmental noise and disturbances in this system were reduced significantly after combining a reference interferometer and an all fibre polarisation scrambler so as to produce good stability and repeatability. Furthermore, the measurement mirror was mounted on a piezoelectric transducer (PZT) and disturbances were introduced in the system in order to simulate on-line surface measurements. Both a commercial fibre and the IO couplers were compared using this method. Better experimental results were achieved when the system using the IO coupler than using the fibre one.     

Recent advances in the integrated micro-flow synthesis containing photochemical reactions

Micro-flow photochemical reactions have great advantage over batch photochemical reactions due to its high light-penetration efficiency. Integrated micro-flow reaction enables efficient synthesis of structurally complex compounds from simple starting materials and it can avoid handling of explosive, toxic, unstable, or odorous intermediates. Combination of micro-flow photochemical reactions with integrated micro-flow synthesis enhances their benefits. Here we summarize recently reported integrated multi-step micro-flow synthesis containing various photochemical reactions.