硅氧烷交联的咪唑基团功能化聚苯醚/聚四氟乙烯耐高温质子交换膜

以聚苯醚(PPO)为基体材料, 通过溴甲基化及咪唑基团功能化, 与聚四氟乙烯(PTFE)复合、 硅氧烷基团水解交联及磷酸掺杂, 制备了兼具高磷酸掺杂含量、 高质子电导率和良好机械性能的高温质子交换膜材料. 以甲基咪唑(MeIm)和咪唑基硅氧烷化合物(SiIm)为功能化试剂(其中咪唑基团提供了磷酸作用位点, 同时SiIm中的硅氧烷基团水解后得到Si—O—Si交联网络结构), 提高了膜材料的机械稳定性. 与PTFE的复合进一步增强了膜材料的机械强度. 结果表明, 复合膜具有较高的电导率和一定的机械强度. 当磷酸掺杂质量分数为242.5%时, PPO-50%SiIm-50%MeIm/PTFE复合膜在160 ℃不加湿条件下的电导率为0.09 S/cm, 室温下的断裂拉伸强度为3.6 MPa.     

Cationic dirhodium carboxylate-catalyzed synthesis of dihydropyrimidones from propargyl ureas

Cationic Rh(II) complexes are able to catalyze the regioselective hydroamination of propargyl ureas in a 6-endo fashion. This transformation permits access to interesting substitution patterns of dihydropyrimidines, which have found use as nucleotide exchange factor inhibitors.     

Water‐soluble metalated and non‐metalated A2B‐ and A3‐corrole/amino acid conjugates: syntheses,characterization and properties

In this study, novel water‐soluble corrole amino acid conjugates were synthesized and characterized. The coupling reaction of A₂B‐ and A₃‐corroles with glycine ethyl ester and taurine under strong basic conditions proved to be successful and yielded di‐ and trifunctionalized corrole amino acid conjugates in good yields. The subsequent metalation of the corrole/amino acid conjugates broadens the scope for applications considerably. As examples, we herein show the catalytic activity of the Mn(III) A₃‐corrole towards O₂ evolution. First we employed tert‐butyl hydroperoxide (t‐BuOOH) as oxidant to obtain the Mn(V)oxo species and tetrabutyl ammonium hydroxide (TBAH) as hydroxide donor agent. Furthermore, the binding properties of the non‐metalated and the Mn(III) A₃‐corrole/amino sulfonic acid conjugates and transport of proteins were investigated and the conjugates exhibited binding to human serum albumin (HSA). Finally, a novel Ga(III) A₃‐corrole/amino sulfonic acid derivative was synthesized and we briefly describe the photophysical properties of this compound. Copyright © 2013 John Wiley & Sons, Ltd.     

Host (Nanocavity of Aluminium-Incorporated Mesoporous KIT-6)–guest (12-tungesto(molybdato) Phosphoric Acid) Nanocomposite Material: Efficient and Reusable Catalysts for the Hosomi–Sakurai Three-Component Coupling Reaction

Abstract

The immobilization of heteropoly acids (HPAs) into the Al-functionalized KIT-6 mesoporous molecular sieve has been carried out to see the effect of Al-KIT-6 as a host matrix on the HPA activities. These modified mesoporous molecular sieves are effective catalysts for the Hosomi–Sakurai three-component coupling reaction via condensation of aldehydes, silyl ethers, and allylsilanes.

Supplemental materials are available for this paper. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

THERMAL BEHAVIOR OF PP/PA6 BLENDS UNDER DYNAMIC CONDITIONS. THE EFFECT OF DIFFERENT INTERFACIAL AGENTS BASED ON CHEMICALLY MODIFIED ATACTIC POLYPROPYLENE

The thermal behavior in dynamic conditions of polypropylene/polyamide 6 (PP/PA6) blends with a modified interphase is discussed in terms of the crystallinities of the polypropylene and polyamide components imposed by the processing step conditions and after removal of those constraints by holding the blends 5 min in the molten state in the calorimeter. As interfacial agents, two based on succinic anhydride or succinil-fluoresceine grafted atactic polypropylenes were used. The experimental program was run following the Box-Wilson experimental design methodology. Thermal scans were made using round samples (5 mm diameter and 100 μm thick) cut from compression-molded sheets with morphologies and macroscopic behavior studied previously. Changes of the amount of crystallinity of each polymer in the modified blends are contrasted with the tensile strength values of the heterogeneous materials as a whole; evidence of the different roles played by each interfacial agent acting at the interface among blend components is shown.     

Platanus acerifolia’s buds: additional non-polar metabolites and structure revision of two previous dihydrochalcone-like metabolites

In addition to the methylated and prenylated flavonoids previously reported from Platanus acerifolia, the multistep chromatographic processing of the n-hexane extract of the fresh unripe buds resulted in the isolation of 11 metabolites. Besides six common wax constituents, the n-hexane portion led to the isolation of four gem-dimethylpyrano flavanones. They corresponded to two pairs of angular and linear isomers derived only from pinocembrin (5,7-dihydroxyflavanone). Additionally, a novel β-decadione was split into the major keto-enol tautomer as shown by the detailed NMR and EIMS analyses. Moreover, the structures of grenoblone and 4-hydroxygrenoblone, two previously reported dihydrochalcone-like metabolites, were revised according to the EIMS spectra.     

An Aldehyde Responsive,Cleavable Linker for Glucose Responsive Insulins

A glucose responsive insulin (GRI) that responds to changes in blood glucose concentrations has remained an elusive goal. Here we describe the development of glucose cleavable linkers based on hydrazone and thiazolidine structures. We developed linkers with low levels of spontaneous hydrolysis but increased level of hydrolysis with rising concentrations of glucose, which demonstrated their glucose responsiveness in vitro. Lipidated hydrazones and thiazolidines were conjugated to the LysB29 side-chain of HI by pH-controlled acylations providing GRIs with glucose responsiveness confirmed in vitro for thiazolidines. Clamp studies showed increased glucose infusion at hyperglycemic conditions for one GRI indicative of a true glucose response. The glucose responsive cleavable linker in these GRIs allow changes in glucose levels to drive the release of active insulin from a circulating depot. We have demonstrated an unprecedented, chemically responsive linker concept for biopharmaceuticals.     

Rational wavelets on the real line

In this note a representation of the discrete Green's function of a compact discretization of a two point boundary value problem of order n 2 is given which among other things allows a direct proff of the convergence (and divergence) properties.     

Experimental NMR and MS study of benzoylguanidines. Investigation of E/Z isomerism

Molecules containing the guanidinic nuclei possess several pharmacological applications, and knowing the preferred isomers of a potential drug is important to understand the way it operates pharmacologically. Benzoylguanidines were synthesized in satisfactory to good yields and characterized by NMR, Electrospray Ionization Mass Spectrometry (ESI‐MS) and Fourrier Transform InfraRed Spectroscopy techniques (FTIR). E/Z isomerism of the guanidines was studied and confirmed by NMR analysis in solution (¹H‐¹³C Heteronuclear Single Quantum Coherence (HSQC) and Heteronuclear Multiple‐Bond Correlation (HMBC), ¹H‐¹⁵N HMBC, ¹H‐¹H Correlation Spectroscopy (COSY) and Nuclear Overhauser Effect Spectroscopy (NOESY) experiments) at low temperatures. Compounds with p‐Cl and p‐Br aniline moiety exist mainly as Z isomer with a small proportion of E isomer, whereas compounds with p‐NO2 moiety showed a decrease in proportion of isomer Z. The results are important for the application of these molecules as enzymatic inhibitors. Copyright © 2013 John Wiley & Sons, Ltd.