Synthesis, characterization, degradation of biodegradable castor oil based polyesters

A new family of castor oil based biodegradable polyesters was synthesized by catalyst free melt condensation reaction between two different diacids and castor oil with d-mannitol. The polymers synthesized were characterized by NMR spectroscopy, FT-IR and the thermal properties were analysed by DSC. The results of DSC show that the polymer is rubbery in physiological conditions. The contact angle measurement and hydration test results indicate that the surface of the polymer is hydrophilic. The mechanical properties, evaluated in the tensile mode, shows that the polymer has characteristics of a soft material. In vitro degradation of polymer in PBS solution carried out at physiological conditions indicates that the degradation goes to completion within 21 days and it was also found that the rate of degradation can be tuned by varying the curing conditions.     

烧原油高效燃烧器的研究

本文讨论了用于油田加热炉的一种烧原油高效燃烧器的设计，论述了Ｙ型蒸汽雾化喷嘴、正交蒸汽雾化喷嘴和高压离心喷嘴的具体设计结果。该燃烧器对原油加温并采用内、外双漩流器组织燃烧，明显提高了燃烧效率。最后还指出了这种燃烧器的开发与应用前景。     

Monitoring oil displacement processes with k‐t accelerated spin echo SPI

Magnetic resonance imaging (MRI) is a robust tool to monitor oil displacement processes in porous media. Conventional MRI measurement times can be lengthy, which hinders monitoring time‐dependent displacements. Knowledge of the oil and water microscopic distribution is important because their pore scale behavior reflects the oil trapping mechanisms. The oil and water pore scale distribution is reflected in the magnetic resonance T₂ signal lifetime distribution. In this work, a pure phase‐encoding MRI technique, spin echo SPI (SE‐SPI), was employed to monitor oil displacement during water flooding and polymer flooding. A k‐t acceleration method, with low‐rank matrix completion, was employed to improve the temporal resolution of the SE‐SPI MRI measurements. Comparison to conventional SE‐SPI T₂ mapping measurements revealed that the k‐t accelerated measurement was more sensitive and provided higher‐quality results. It was demonstrated that the k‐t acceleration decreased the average measurement time from 66.7 to 20.3 min in this work. A perfluorinated oil, containing no ¹H, and H₂O brine were employed to distinguish oil and water phases in model flooding experiments. High‐quality 1D water saturation profiles were acquired from the k‐t accelerated SE‐SPI measurements. Spatially and temporally resolved T₂ distributions were extracted from the profile data. The shift in the ¹H T₂ distribution of water in the pore space to longer lifetimes during water flooding and polymer flooding is consistent with increased water content in the pore space. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of pyrolysis–mass spectrometry and pyrolysis–gas chromatography–mass spectrometry with electron-ionization or resonance-enhanced-multi-photon ionization for characterization of crude oils

A novel analytical system for gas-chromatographic investigation of complex samples has been developed, that combines the advantages of several analytical principles to enhance the analytical information. Decomposition of high molecular weight structures is achieved by pyrolysis and a high separation capacity due to the chromatographic step provides both an universal as well as a selective and sensitive substance detection. The latter is achieved by simultaneously applying electron ionization quadrupole mass spectrometry (EI-QMS) for structural elucidation and [1 + 1]-resonance-enhanced-multi-photon ionization (REMPI) combined with time-of-flight mass spectrometry (ToFMS). The system has been evaluated and tested with polycyclic aromatic hydrocarbon (PAH) standards. It was applied to crude oil samples for the first time. In such highly complex samples several thousands of compounds are present and the identification especially of low concentrated chemical species such as PAH or their polycyclic aromatic sulfur containing heterocyclic (PASH) derivatives is often difficult. Detection of unalkylated and alkylated PAH together with PASH is considerably enhanced by REMPI–ToFMS, at times revealing aromatic structures which are not observable by EI-QMS due to their low abundance. On the other hand, the databased structure proposals of the EI-QMS analysis are needed to confirm structural information and isomers distinction. The technique allows a complex structure analysis as well as selective assessment of aromatic substances in one measurement. Information about the content of sulfur containing compounds plays a significant role for the increase of efficiency in the processing of petroleum.     

兖州煤与催化裂化油浆共处理及其重质产物组成性质的初步研究

采用石家庄催化裂化油浆和兖州煤共处理，考察了反应条件对兖州煤转化及产物分布的影响，并应用棒状薄层色谱分析了共处理重质产物族组成的变化规律。结果表明，催化裂化油浆与兖州煤共处理，可大大提高兖州煤的转化率，共处理既可得到部分轻质油品，又可得到相当量的重质产物。ＴＬＣ／ＦＩＤ分析表明，催化裂化油浆与兖州煤共处理的重质产物与商用高等级道路沥青族组成近似，重质产物可用于制备高等组道路沥青。     

Modified polysaccharides for use in enhanced oil recovery applications

Aqueous solutions of a charged hydrophobically modified hydroxyethylcellulose (HM-HEC(−)) exhibit high viscosities even at low polymer concentrations (0.2 wt%), which is an interesting feature in connection with enhanced oil recovery. This polymer was synthesized for this work. Effects of temperature and addition of sodium dodecyl sulfate (SDS) or hydroxypropyl-β-cyclodextrin (HP-β-CD) on the viscosity properties of a semidilute solution of HM-HEC(−) are examined. The results for the HM-HEC(−)/SDS system disclose strong interactions between HM-HEC(−) and SDS at low level of SDS addition, and this leads to a significant viscosification of the polymer-surfactant mixture. At higher surfactant concentrations the association complexes are disrupted. A strong temperature effect of the viscosity is observed at moderate levels of SDS addition, with lower values of the viscosity at elevated temperatures because of enhanced polymer chain mobility that breaks up the associations. Addition of HP-β-CD monomers to the HM-HEC(−) solution generates decoupling of associations via inclusion complex formation with the polymer hydrophobic tails and the viscosity decreases. By using temperature and addition of these co-solutes, it is demonstrated that the viscosity of the polymer solution can be tuned over a large range of viscosity values.     

Thermodynamic phase equilibria of wax precipitation in crude oils

Economic loss due to wax precipitation in oil exploitation and transportation has reached several billion dollars a year recently. Development of a model for better understanding of the process of wax precipitation is therefore very important to reduce the loss. In this paper, a new thermodynamic model for predicting phase equilibriums of crude oils is proposed. The modified SRK EOS and the UNIQUAC equations are used to describe the vapor, liquid phase and the wax, respectively. New correlations have been introduced to calculate the volume parameter, c, in SRK EOS and the heat of vaporization in UNIQUAC equation. The model can be used to describe the systems which contain paraffin, naphthene and aromatic fractions. New correlations for the enthalpies, temperatures of solid–solid transitions and fusion enthalpies of paraffins are established in this paper based on data obtained from open literature. By using the proposed modified model, the wax precipitation in hydrocarbon fluids has been predicted for three crude oil systems. The calculation results have been compared with experimental observations and those results obtained using regular solution models. It is found that wax precipitation in complex systems can be better predicted by using this new model.     

Water‐sorption kinetics in oil palm fibers

Oil palm fibers represent a very abundant and natural resource for raw materials that can be efficiently utilized as reinforcement in polymers. The sorption characteristics of two types of oil palm fibers—oil palm empty‐fruit‐bunch (OPEFB) fiber and oil palm mesocarp fiber‐in distilled water, mineral water, and water containing salt at four different temperatures were investigated. The uptake of water decreased with an increase in temperature. The OPEFB fiber showed higher sorption than the mesocarp fiber. This was due to the uptake associated with the capillary action in the OPEFB fiber. The thermodynamic parameters of the sorption process were calculated. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1215–1223, 2001     

Structural characterization of the ligstroside aglycone isoforms in virgin olive oils by liquid chromatography–high‐resolution Fourier‐transform mass spectrometry and H/Dexchange

A systematic structural characterization of the isomeric forms related to ligstroside aglycone (LA), one of the most relevant secoiridoids contained in virgin olive oils, was performed using reverse phase liquid chromatography with electrospray ionization Fourier‐transform single and tandem mass spectrometry, operated in negative ion mode (RPLC‐ESI(?)‐FTMS and FTMS/MS). The high mass resolution and accuracy provided by the adopted orbital trap mass analyzer enabled the recognition of more than 10 different isomeric forms of LA in virgin olive oil extracts. They were related to four different types of molecular structure, two of which including a dihydropyranic ring bearing one or two aldehydic groups, whereas the others corresponded to dialdehydic open‐structure forms, differing just for the position of a C═C bond. The contemporary presence of enolic or dienolic tautomers associated to most of these compounds, stable at room temperature (23°C), was also assessed through RPLC‐ESI‐FTMS analyses operated under H/D exchange conditions, ie, by using D₂O instead of H₂O as co‐solvent of acetonitrile in the RPLC mobile phase. As discussed in the paper, the results obtained for LA indicated a remarkable structural similarity with oleuropein aglycone (OA), the most abundant secoiridoid of olive oil, whose isoforms had been previously characterized using the same analytical approach.     

Characterization and screening of metals,metalloids and biomarkers in crude oil by ICP–MS/OES,and GC–MS techniques after digestion by microwave‐induced combustion

A method for digestion of light and medium Iraqi crude oils (Basrah and Khanaken oils) using microwave‐induced combustion (MIC) in closed vessels is described for the determination of Hg, Au, Cu, Al, Ca, Co, K, Mg, Si and Sr by inductively coupled plasma optical emission spectrometry (ICP–OES) and Mo, Ti, Mn, Li, Se^?1, Rb, Ag, Ba, Pb, As, Cd, Cr, Fe, Ni, V and Zn by inductively coupled plasma mass spectrometry (ICP–MS). Upon using MIC it was possible to obtain lower limits of detection by ICP–MS and also by ICP–OES compared with those obtained by microwave‐assisted digestion. The MIC was the best choice with regard to the possibility of using dilute nitric acid as an absorbing solution, which is important to minimize the interference encountered by ICP–MS and ICP–OES.The physicochemical parameters and some contaminants of crude oil samples were analyzed to classify and assess the quality of the crude oils. This study determines the viability of the use of Fourier transform infrared spectroscopy as an alternativee to traditional petroleum geochemical methods for crude oil characterization. The infrared fingerprints agree with the results obtained from GC–MS analysis.